Photonics / Fotonik
Permanent URI for this collectionhttps://hdl.handle.net/11147/2590
Browse
13 results
Search Results
Research Project Fullerenlere Alternatif Yeni Asetil Köprülü Perilendiimidlerin Sentezi ve Akseptör Özelliklerinin Fotofiziksel Süreçlerle Araştırılması(2019) Varlıklı, CananOrganik güneş hücresi (OGH) nde elektrik üretimi, donörün ışığı soğruması ekziton oluşumu, ekziton difüzyonu, ayrışması ve elektron transfer süreçleri, elektron ve boşlukların katot ve anotta toplanması ile gerçekleşir. Literatürde birçok farklı elektron verici (D) ve alıcı (A) malzeme geliştirilmektedir. A malzemeleri içerisinde en sık kullanılanlardan birisi fulleren ve türevleridir. Bu türevlerin üretimi oldukça zor ve yüksek maliyetlidir. Bu sebeple, literatürde son 10 yıl da, fulleren içermeyen OGHne olan ilginin arttığı görülmektedir. Perilendiimidler (PDIler), görünür bölgedeki yüksek molar soğurma katsayıları ve elektron ilgileri ile dikkat çekmektedir. Ancak, PDIlerin genel organik çözgenlerdeki çözünürlükleri düşük, agregatlaşma eğilimleri fazladır. Güçlü perilen-perilen etkileşimleri film fazında mikroboyutlara ulaşabilecek kristalitler oluşturabilmektedir. Bu durum ise, ekziton haraketliliğini ve elektron ve boşlukların elektrotlarda toplanmasını olumsuz etkilemektedir. Bu proje kapsamında, izomerik saflıkta 1,6- ve 1,7- bis[(trifenil)(4-etinil-fenil)silan)- N,N′-di(2- etilhekzil)-perilen-3, 4, 9, 10-tetrakarboksilikasit diimid [1,6 ve 1,7-Di(TPhSi)APDI] sentezlenmiş, 1H ve 13C NMR ile karakterize edilmiştir. Saf izomerlerin absorpsiyon ve fotoluminesans özellikleri, indirgenme potansiyelleri, en yüksek enerjili elektron içeren moleküler orbital ve en düşük enerjili elektron içermeyen moleküler orbital enerji seviyeleri tespit edilmiştir. Referans olarak sentezlenen N,N′-di(2-etilhekzil)-perilen-3, 4, 9, 10- tetrakarboksilikasit diimid [PDI(2EH)] ve 1,6- ve 1,7-Di-TPhSiAPDI(2EH) in çözelti ve film fazı fotofiziksel özellikleri incelenmiştir. Yeni sentezlenen PDI türevlerinin ve ticari fulleren türevinin (PCBM), ticari bir donör olan poli[N-9'-heptadekanil-2,7-karbazol-alt-5,5-(4',7'-di-2- thienyl-2',1',3'-benzothiadiazole)] (PCDTBT) ile çözelti ve film fazındaki etkileşimleri izlenerek, karşılaştırılmıştır. Filmlerin morjolojik özellikleri atomik kuvvet mikroskobu ölçümleri ile tespit edilmiştir. 1,7-Di-TPhSiAPDI(2EH) in agregatlaşma eğiliminin ve fotokararlılığının PDI(2EH) den düşük, soğurma dalga boyunun, elektron ilgisinin ve yaşam ömrünün PDI(2EH) den yüksek ve molar soğurma katsayısının PDI(2EH) ile aynı seviyede olduğu tespit edilmiştir. Bu özellikleri ile yeni molekülün uygun D malzeme kullanımı ile hazırlanacak OGH aygıtında, PDI(2EH) den yüksek verim vereceği düşünülmüştür.Article Citation - WoS: 3Citation - Scopus: 4Soluble Cytotoxic Ruthenium(ii) Complexes With 2-Hydrazinopyridine(Pleiades Publishing, 2019) Soliman, A. A.; Attaby, F. A.; Alajrawy, O., I; Majeed, S. R.; Şahin, C.; Varlıklı, CananNew water soluble Ru(II) binary complex [Ru(C5H7N3)(X)(H2O)(2)] with 2-hydrazinopyridine and its ternary complexes with X = dichloride, oxalate, malonate or pyrophosphate ligands have been synthesized. The complexes have been characterized using elemental analyses, mass, IR, and UV-Vis. spectroscopies, cyclic voltammetry, magnetic susceptibility, and thermal analysis. The complexes are diamagnetic and the electronic spectral data showed that peaks are due to low spin octahedral Ru(II) complexes. The optimized structures of the complexes 1-4 indicate distorted octahedral geometry with bond angles around the ruthenium atom ranged from 80.44 degrees to 99.64 degrees. The values of the electronic energies (-635 to -1145 a.u.), the highest occupied molecular orbital energies (-0.181 to 0.073 a.u.) and lowest unoccupied molecular orbital energies (-0.056 to 0.167 a.u.) indicate the stability of the complexes. The complexes are polarized as indicated from the dipole moment values (9.39-14.27 Debye). The complexes have noticeable cytotoxicity with IC50 (mu M): 0.011-0.062 (HepG-2), 0.015-0.080 (MCF-7), 0.015-0.116 (HCT-116), and PC-3 (0.034-0.125).Article Citation - WoS: 5Citation - Scopus: 6Contribution of O-2 Plasma Treatment and Amine Modified Gos on Film Properties of Conductive Pedot:pss: Application in Indium Tin Oxide Free Solution Processed Blue Oled(Elsevier, 2019) Diker, Halide; Yeşil, Fatih; Varlıklı, CananPrimary (n-propyl amine, n-PRYLA), secondary (dipropyl amine, DPRYLA) and alcohol (propanol amine, PRPOHA) amine derivatives were used as amine sources in graphene oxide (GO) modification and obtained samples were named as nPRYLA-GO, DPRYLA-GO and PRPOHA-GO, respectively. Modified graphene oxide (mGO) derivatives were doped in poly (3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PH1000) and O-2 plasma treatment (70W, 3 min) was applied on the spin casted films. PH1000:mGO films presented high optical transparency values (> 90%) and low resistivity (177-183 Q/sq). The roughness values were increased especially when the hydrophobic alkyl chain containing DPRYLA-GO and nPRYLA-GO were doped in PH1000. Prepared films were utilized as anode in solution processed blue organic light emitting diode. PH1000:PRPOHA-GO anode presented more than 30 nm of decrement in full with at half maximum and 1.6, 1.5 and 1.9 fold enhancements in current, power and external quantum efficiency values, compared to those of ITO anode, respectively.Article Citation - WoS: 30Citation - Scopus: 32Perylene-Embedded Electrospun Ps Fibers for White Light Generation(Elsevier Ltd., 2019) Güner, Tuğrul; Aksoy, Erkan; Demir, Mustafa Muammer; Varlıklı, CananPerylene dyes have been employed in the fabrication of white light due to their superior photophysical properties and relatively easy synthetic methods. However, their molecular aggregation in solid state is one of the main handicaps since it causes deviation in their optical properties and quenches photoluminescence quantum yields (Phi(f)). Investigation of the photophysical properties of a green (PTE), a yellow (PDI) and a new red (DiPhAPDI) emitting perylene derivative in solution, drop-casted films, polystyrene (PS) fibers and PS fibers embedded in poly (dimethyl siloxane) (PDMS) showed that PS:dye fibers prevent aggregation to some extend and allows high Of of dyes. The Of values of PTE, PDI and DiPhAPDI were all higher than 93.0% in solution and 84.8%, 94.3% and 73.6%, respectively in PS:dye fibers. Embedding the fibers in PDMS improved the photostabilities of the dyes two folds compared to their solution phases. The prepared dye containing fibers were combined together into a single PDMS film and utilized as a frequency conversion layer on a blue LED. Fabricated samples were found to show high color rendering index (>= 90), adjustable CCT (7500 K-5000 K), and power efficiency values exceeding 2001m/W depending on the used fiber amount in mass.Conference Object Citation - WoS: 3Citation - Scopus: 2Fabrication and Characterization of a Solution Processed Flexible Thermal Sensor by Using Chemically Synthesized Go and Rgo(Institute of Electrical and Electronics Engineers Inc., 2019) Bozkurt, Hakan; Diker, Halide; Varlıklı, CananGraphene oxide (GO) was reduced by ascorbic acid which is an environmental-friendly reductant and obtained sample was named as reduced GO (rGO). Stable dispersions of GO and rGO were prepared in N,N-Dimethylformamide (DMF). Compared to GO sample, rGO was determined to have more thermal stability, smaller sheet size and lower surface energy. GO and rGO dispersions were drop-casted on aluminum (Al) coated acetate substrate and used as thermal sensor. Fabricated sensors were tested from 25 °C to 150 °C. The sensors fabricated with GO, were not stabile against driven temperature changes. However, rGO ones, presented no thermal hysteresis effect after the first heating step. This sensor (Al/rGO/Al) acted like an NTC (Negative Temperature Coefficient) thermistor. The resistance of the rGO sensor was changed between 42 k? to 25 k? depending on the test temperature range (25 °C to 150 °C). Average beta value was calculated as 519.7649 K. © 2019 IEEE.Article Citation - WoS: 7Citation - Scopus: 7Synthesis, Photophysical and Electrochemical Properties of Novel Carbazole-Triazine Based High Triplet Energy, Solution-Processable Materials(Elsevier, 2018) Öner, Saliha; Aydemir, Murat; Yeşil, Fatih; Şahin, Çiğdem; Varlıklı, CananA series of molecules; tBuCz1SiTrz, tBuCz2SiTrz and tBuCz3SiTrz, which contain carbazole unit as hole-transporting group (donor-D) and triazine unit as electron transporting group (acceptor-A) were synthesized and characterized as high-triplet energy (>2.9 eV), solution-processable bipolar emitting materials. The conjugation between the D-A groups was interrupted by using bulky tetraphenylsilane groups as spacer aiming to obtain large bandgap and high-triplet energy. The photophysical behaviors of the molecules were investigated by UV-Vis absorption, photoluminescence, phosphorescence, photoluminescence quantum yield and lifetime measurements. Solvent polarity effects were investigated on the intramolecular charge transfer (ICT) behaviour and large solvatochromic effect was observed with the increasing solvent polarity. Electrochemical properties were determined by cyclic voltammetry. All molecules showed oxidation bands arise from the carbazole groups. Reduction bands were originated from the triazine groups and the intramolecular charge transfer between D-A groups. Photophysical, electrochemical and computational characterizations addressed that tBuCz2SiTrz has the weakest ICT character, highest photoluminescence quantum yield (PLQY) and charge balance.Article Citation - WoS: 31Citation - Scopus: 34Highly Efficient Supercapacitor Using Single-Walled Carbon Nanotube Electrodes and Ionic Liquid Incorporated Solid Gel Electrolyte(SAGE Publications, 2018) Siyahjani, Shirin; Öner, Saliha; Singh, Pramod K.; Varlıklı, CananGel polymer electrolyte (GPE) comprising a low viscosity ionic liquid, that is, 1-propyl-3-methyl imidazolium bis(trifluoromethyl sulfonyl)imide (PMI-TFSI, viscosity 38 cP at 20°C) and a polymer, that is, polyvinyl alcohol (PVA) have been prepared using solution cast technique and characterized by impedance spectroscopy, X-ray diffraction, differential scanning calorimetry, optical microscopy, and Fourier transform infrared spectroscopy. Blending PMI-TFSI with PVA matrix hindered the crystallinity of polymer matrix and presented remarkable enhancement in electrical conductivity with a conductivity maxima at 250 wt% PMI-TFSI. The prepared electric double-layer capacitor using single-walled carbon nanotube as symmetric electrodes and PVA:250 wt% PMI-TFSI as GPE presented a capacitance value of about 28 F g−Article Citation - WoS: 28Citation - Scopus: 30P3HT-graphene bilayer electrode for Schottky junction photodetectors(IOP Publishing Ltd., 2018) Aydın, Hasan; Kalkan, Sırrı Batuhan; Varlıklı, Canan; Çelebi, CemWe have investigated the effect of a poly (3-hexylthiophene-2.5-diyl)(P3HT)-graphene bilayer electrode on the photoresponsivity characteristics of Si-based Schottky photodetectors. P3HT, which is known to be an electron donor and absorb light in the visible spectrum, was placed on CVD grown graphene by dip-coating method. The results of the UV-vis and Raman spectroscopy measurements have been evaluated to confirm the optical and electronic modification of graphene by the P3HT thin film. Current-voltage measurements of graphene/Si and P3HT-graphene/Si revealed rectification behavior confirming a Schottky junction formation at the graphene/Si interface. Time-resolved photocurrent spectroscopy measurements showed the devices had excellent durability and a fast response speed. We found that the maximum spectral photoresponsivity of the P3HT-graphene/Si photodetector increased more than three orders of magnitude compared to that of the bare graphene/Si photodetector. The observed increment in the photoresponsivity of the P3HT-graphene/Si samples was attributed to the charge transfer doping from P3HT to graphene within the spectral range between near-ultraviolet and near-infrared. Furthermore, the P3HT-graphene electrode was found to improve the specific detectivity and noise equivalent power of graphene/Si photodetectors. The obtained results showed that the P3HT-graphene bilayer electrodes significantly improved the photoresponsivity characteristics of our samples and thus can be used as a functional component in Si-based optoelectronic device applications.Conference Object Citation - WoS: 9Citation - Scopus: 11White Led Light Production Using Dibromoperylene Derivatives in Down Conversion of Energy(Canadian Science Publishing, 2018) Aksoy, Erkan; Demir, Nuriye; Varlıklı, CananPerylene derivatives of N,N′-bis(2,6-diisopropylphenyl)-1,6(7)-dibromoperylene-3,4,9,10-tetracarboxylic diimide (DBrPDI) and 1,7-dibromo perylene-3,4,9,10-tetracarboxylic acid butyl ester (DBrPTE) were synthesized, and their structural and optical characterizations were explored. Both DBrPDI and DBrPTE, which were utilized as wavelength converters on a GaN/InGaN based blue LED, were singlet sensitizers and had molar absorptivity constants around 104 Lmol-1cm-1. The blue LED that was used had Commission internationale de l'eclairage (CIE) coordinates of x, y = 0.13, 0.06; power and luminous efficiencies of 2.7 lm/W and 6.6 cd/A @5 mA, respectively. Because the fluorescence quantum yield of DBrPDI was much higher than that of DBrPTE, a meaningful white light efficiency was obtained with the diimide derivative. The use of DBrPDI resulted in white light with CIE coordinates of x, y = 0.34, 0.29 and luminous efficiency of 6.35 cd/A @5 mA, respectively. Using DBrPDI in a resin matrix resulted in more than three orders of magnitude increase in the luminous efficiency value (23.0 cd/A @5 mA) while the CIE coordinates remained the same. Whenever the applied current reached 20 mA, a CRI value of Ra = 90 was obtained.Article Citation - WoS: 15Citation - Scopus: 21Triboluminescent Electrospun Mats With Blue-Green Emission Under Mechanical Force(American Chemical Society, 2017) İncel, Anıl; Varlıklı, Canan; McMillen, Colin D.; Demir, Mustafa MuammerFibrous mechanosensing elements can provide information about the direction of crack propagation and the mechanism of material failure when they are homogeneously dispersed into the bulk volume of materials. A fabrication strategy of fibrous systems showing triboluminescent (TL) responses is in high demand for such applications. In this work, micrometer-sized Cu(NCS)(py)2(PPh3) crystals were synthesized, and polymeric fibrous mats containing the TL crystals were obtained via electrospinning as a stress probe for the determination of mechanical impact. Four different polymeric systems have been employed (PMMA, PS, PU, and PVDF), and the mechano-optical sensing performance of electrospun mats of the polymer-crystal composites was measured. Photophysical properties (quantum yield, band gap, and broadness of the emission) of the TL crystal/electrospun mat composites were also studied. TL and PL emission maxima of the PU-based composite mat show identical behavior due to the chemical affinity between the two structures and the smallest fiber diameter. Moreover, the PU fiber mats exhibit long-lived bluish-green emission persisting over a large number of drops.