Photonics / Fotonik
Permanent URI for this collectionhttps://hdl.handle.net/11147/2590
Browse
7 results
Search Results
Article Citation - WoS: 8Citation - Scopus: 9Tuning the Colour of Solution Processed Perylene Tetraester Based Oleds From Yellowish-Green To Greenish-White: a Molecular Engineering Approach(Elsevier, 2023) Aksoy, Erkan; Bozkuş, Volkan; Varlıklı, CananThree regioisomericaly pure 1,7-di-ethynyl bridged perylene-3,4,9,10-tetracarboxy tetrabutylesters functionalized with triisopropylsilyl-ethynylen (PTE1), phenyl-ethynylen (PTE2) and tetraphenylsilyl-ethynylen (PTE3) groups were synthesized. Photophysical, thermal, electrochemical, and solution processed electroluminescence (EL) behaviours were investigated in comparison with a basic perylene-3,4,9,10-tetracarboxy tetrabutylester (PTEref) structure. Stepwise π conjugation, allowed tuning the absorption and photoluminescence wavelengths of the PTEs without disturbing the photo, thermal and electrochemical stabilities; ≫10h, >250 °C, and >50 cycles, respectively. Electron mobility of PTE2 is measured to be more than 10-fold of the other PTE derivatives. Individual utilization of PTE derivatives as solid-state emitters in poly(N-vinylcarbazole) (PVK): 2-(4-Biphenylyl)-5-phenyl-1,3,4-oxadiazole (PBD) host matrix produced yellowish-green EL. Benefiting from higher electron mobiliy, PTE2 emitter presented the best device efficiency values with an EL maximum of 535 nm. Whereas dual doping of the synthesized PTEs with PTEref resulted in greenish-white light with increased stability. Although the emitting layer contained no red emitting component, optimization of the dual doping ratio of PTEref:PTE3 produced a colour rendering index value of 76 with Commission Internationale d'Eclairage coordinates of (0.29, 0.37).Article Citation - WoS: 28Citation - Scopus: 29Enhancing the Efficiency of Mixed Halide Mesoporous Perovskite Solar Cells by Introducing Amine Modified Graphene Oxide Buffer Layer(Elsevier, 2020) Şahin, Çiğdem; Diker, Halide; Sygkridou, Dimitra; Varlıklı, Canan; Stathatos, EliasIn this study, graphene oxide (GO) was synthesized via Tour method and then modified with two different amine sources that contained different branched alkyl chains. The GO and modified GOs (mGOs) with dihexylamine (DHA) and 2-ethylhexylamine (2EHA) as amine sources were used respectively as buffer layers in mixed halide mesoporous perovskite solar cells (PSCs) in order to examine whether they could improve their performance. GO and mGO samples were characterized by several techniques such as X-Ray Diffraction, X-Ray photoelectron spectroscopy (XPS), Raman analysis and thermal gravimetric analysis (TGA). The preparation of the CH3NH3PbI3-xClx perovskite solution was performed using standard Schlenk techniques under argon atmosphere to attain a homogeneous coverage of the perovskite film. The solar cells with the additional layer of mGO derivatives between perovskite and hole transporting layer showed an improved overall performance compared to the reference devices which was attributed to the enhanced charge carrier transport via the mGOs. In particular, 10% increase to the overall performance of the solar cells was monitored in devices where 2-ethylhexylamine (2EHA) modified GO was used, compared to standard cell without buffer layer. (C) 2019 Elsevier Ltd. All rights reserved.Article Citation - WoS: 30Citation - Scopus: 32Perylene-Embedded Electrospun Ps Fibers for White Light Generation(Elsevier Ltd., 2019) Güner, Tuğrul; Aksoy, Erkan; Demir, Mustafa Muammer; Varlıklı, CananPerylene dyes have been employed in the fabrication of white light due to their superior photophysical properties and relatively easy synthetic methods. However, their molecular aggregation in solid state is one of the main handicaps since it causes deviation in their optical properties and quenches photoluminescence quantum yields (Phi(f)). Investigation of the photophysical properties of a green (PTE), a yellow (PDI) and a new red (DiPhAPDI) emitting perylene derivative in solution, drop-casted films, polystyrene (PS) fibers and PS fibers embedded in poly (dimethyl siloxane) (PDMS) showed that PS:dye fibers prevent aggregation to some extend and allows high Of of dyes. The Of values of PTE, PDI and DiPhAPDI were all higher than 93.0% in solution and 84.8%, 94.3% and 73.6%, respectively in PS:dye fibers. Embedding the fibers in PDMS improved the photostabilities of the dyes two folds compared to their solution phases. The prepared dye containing fibers were combined together into a single PDMS film and utilized as a frequency conversion layer on a blue LED. Fabricated samples were found to show high color rendering index (>= 90), adjustable CCT (7500 K-5000 K), and power efficiency values exceeding 2001m/W depending on the used fiber amount in mass.Article Citation - WoS: 29Citation - Scopus: 32Enhanced Capacitive Behaviour of Graphene Based Electrochemical Double Layer Capacitors by Etheric Substitution on Ionic Liquids(Elsevier, 2020) Siyahjani, Shirin; Öner, Saliha; Diker, Halide; Gültekin, Burak; Varlıklı, CananIn this study, we report the effect of etheric substituents in imidazolium and ammonium based ionic liquids (IL) on the performance of electrochemical double layer capacitors (EDLC) consisted of gel polymer electrolyte (GPE) and reduced graphene oxide (RGO) electrode. GPEs contain poly (vinylidene fluoride-hexafluompropylene) (PVDF-HFP) and the ILs. Ammonium and imidazolium based ionic liquids (ILs) differ by their length of etheric groups and etheric group contents, respectively. According to the cyclic voltammetry, galvanostatic chargedischarge and electrochemical impedance spectroscopy measurements, longer etheric group substituted {N-methyl-2- (2-methoxyethoxy)-N,N-bis [2- (2-methoxyethoxy)ethyl] ethan-1-aminium bis(tri-fluoromethanesulfonyl)imide (AMEt-TFSI) and ether substituted (3-allyl-1-[2-(2-methoxyethoxy)ethyl]-1H-imidazole-3-ium bis(trifluommethanesulfonyeimide (AL3IL-TFSI), tender specific capacitances of 250 Fg(-1) and 238 Fg(-1) and energy density values of 61.36 wh kg(-1) and 61.56 wh kg(-1), respectively.Article Citation - WoS: 7Citation - Scopus: 7Synthesis, Photophysical and Electrochemical Properties of Novel Carbazole-Triazine Based High Triplet Energy, Solution-Processable Materials(Elsevier, 2018) Öner, Saliha; Aydemir, Murat; Yeşil, Fatih; Şahin, Çiğdem; Varlıklı, CananA series of molecules; tBuCz1SiTrz, tBuCz2SiTrz and tBuCz3SiTrz, which contain carbazole unit as hole-transporting group (donor-D) and triazine unit as electron transporting group (acceptor-A) were synthesized and characterized as high-triplet energy (>2.9 eV), solution-processable bipolar emitting materials. The conjugation between the D-A groups was interrupted by using bulky tetraphenylsilane groups as spacer aiming to obtain large bandgap and high-triplet energy. The photophysical behaviors of the molecules were investigated by UV-Vis absorption, photoluminescence, phosphorescence, photoluminescence quantum yield and lifetime measurements. Solvent polarity effects were investigated on the intramolecular charge transfer (ICT) behaviour and large solvatochromic effect was observed with the increasing solvent polarity. Electrochemical properties were determined by cyclic voltammetry. All molecules showed oxidation bands arise from the carbazole groups. Reduction bands were originated from the triazine groups and the intramolecular charge transfer between D-A groups. Photophysical, electrochemical and computational characterizations addressed that tBuCz2SiTrz has the weakest ICT character, highest photoluminescence quantum yield (PLQY) and charge balance.Article Citation - WoS: 114Citation - Scopus: 135Perspectives for Solid Biopolymer Electrolytes in Dye Sensitized Solar Cell and Battery Application(Elsevier Ltd., 2016) Singh, Rahul; Polu, Anji Reddy; Bhattacharya, B.; Rhee, Hee-Woo; Varlıklı, Canan; Singh, Pramod K.Photovoltaic technologies represent one of the leading research areas of solar energy which is one of the most powerful renewable alternatives of fossil fuels. In a common photovoltaic application the batteries play a key role in storage of energy generated by solar panels. Although it will take time for dye sensitized solar cells (DSSCs) and batteries based on biopolymer electrolytes to take their places in the market, laboratory studies prove that they have a lot to offer. Most efficient DSSCs and batteries available in market are based on liquid electrolytes. The advantages of liquid electrolytes are having high conductivity and good electrode-electrolyte interface whereas, disadvantages like corrosion and evaporation limit their future sustainability. Biopolymer electrolytes are proposed as novel alternatives which may overcome the problems stated above. In this review, we focus on fabrication, working principle as well as up to date status of DSSCs and batteries using biopolymer electrolytes. The effects of structural and electrical properties of biopolymer based electrolytes on the solar energy conversion efficiencies of DSSCs and their compatibility with lithium or other salts in battery applications are summarized. Biopolymer electrolyte based DSSCs are categorized on the basis of types of additives and recent outcomes of author's laboratory studies on biopolymer electrolyte based DSSCs and batteries are also presented.Article Citation - WoS: 25Citation - Scopus: 26Solution Processable Neutral State Colourless Electrochromic Devices: Effect of the Layer Thickness on the Electrochromic Performance(Royal Society of Chemistry, 2016) Tahtalı, Gürhan; Has, Zeynep; Doyranlı, Ceylan; Varlıklı, Canan; Koyuncu, SermetIn this study, a neutral state colourless electrochromic device fabricated through a solution process is introduced. The device contains indium doped transparent oxide coated glass as the transparent conductive electrode, poly(N-(2-ethylhexyl)carbazol-3,6-diyl) (PCbz) as the anodically colouring material, poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) as the ion storage layer and a lithium perchlorate based conducting gel electrolyte. A maximum optical contrast (ΔT%) of 58% at 800 nm is achieved by optimizing the film thickness of both the organic layers. The device that has layers of 220 nm PCbz and 120 nm PEDOT:PSS thickness revealed a high coloration efficiency (1246 cm2 C-1) and colouring and bleaching response times of 5.6 s and 2.3 s, respectively.