Photonics / Fotonik
Permanent URI for this collectionhttps://hdl.handle.net/11147/2590
Browse
22 results
Search Results
Article Citation - WoS: 3Citation - Scopus: 3Green Fabrication of Lanthanide-Doped Hydroxide-Based Phosphors: Y(oh)(3):eu3+ Nanoparticles for White Light Generation(Beilstein-Institut Zur Forderung der Chemischen Wissenschaften, 2019) Güner, Tuğrul; Kuş, Anılcan; Özcan, Mehmet; Genç, Aziz; Şahin, Hasan; Demir, Mustafa MuammerPhosphors can serve as color conversion layers to generate white light with varying optical features, including color rendering index (CRI), high correlated color temperature (CCT), and luminous efficacy. However, they are typically produced under harsh synthesis conditions such as high temperature, high pressure, and/or by employing a large amount of solvent. In this work, a facile, water-based, rapid method has been proposed to fabricate lanthanide-doped hydroxide-based phosphors. In this sense, sub-micrometer-sized Y(OH)(3):Eu3+ particles (as red phosphor) were synthesized in water at ambient conditions in <= 60 min reaction time. The doping ratio was controlled from 2.5-20 mol %. Additionally, first principle calculations were performed on Y(OH)(3):Eu3+ to understand the preferable doping scenario and its optoelectronic properties. As an application, these fabricated red phosphors were integrated into a PDMS/YAG:Ce3+ composite and used to generate white light. The resulting white light showed a remarkable improvement (approximate to 24%) in terms of luminous efficiency, a slight reduction of CCT (from 3900 to 3600 K), and an unchanged CRI (approximate to 60) as the amount of Y(OH)(3):Eu3+ was increased.Article Citation - WoS: 24Citation - Scopus: 24Defect Tolerant and Dimension Dependent Ferromagnetism in Mnse2(Royal Society of Chemistry, 2019) Eren, İsmail; İyikanat, Fadıl; Şahin, HasanBy performing density functional theory-based calculations, we investigate the structural, vibrational, electronic and magnetic properties of 2D monolayers, nanoribbons and quantum dots of MnSe2. Vibrational spectrum analysis reveals the dynamical stability of not only ferromagnetic but also antiferromagnetic phases of single layer MnSe2 crystal structures. Electronically, calculations show that 1T-MnSe2 is a ferromagnetic structure displaying metallic behavior. It is also found that the structure preserves its dynamical stability and metallic behavior even under the presence of high density Se vacancies. Moreover, it was predicted that, differing from the 2D MnSe2, metal-metal interaction driven reconstructions result in ferromagnetic-to-antiferromagnetic crossover in the ground state of nanoribbons and quantum dots. With its robust ferromagnetic metallic character in the 2D ultra-thin limit and dimension-dependent magnetic properties, MnSe2 is an important candidate for spintronic device applications.Article Citation - WoS: 35Citation - Scopus: 40Two-Dimensional Covalent Crystals by Chemical Conversion of Thin Van Der Waals Materials(American Chemical Society, 2019) Sreepal, Vishnu; Yağmurcukardeş, Mehmet; Vasu, Kalangi S.; Kelly, Daniel J.; Taylor, Sarah F. R.; Şahin, Hasan; Kravets, Vasyl G.; Nair, Rahul R.Most of the studied two-dimensional (2D) materials have been obtained by exfoliation of van der Waals crystals. Recently, there has been growing interest in fabricating synthetic 2D crystals which have no layered bulk analogues. These efforts have been focused mainly on the surface growth of molecules in high vacuum. Here, we report an approach to making 2D crystals of covalent solids by chemical conversion of van der Waals layers. As an example, we used 2D indium selenide (InSe) obtained by exfoliation and converted it by direct fluorination into indium fluoride (InF3), which has a nonlayered, rhombohedral structure and therefore cannot possibly be obtained by exfoliation. The conversion of InSe into InF3 is found to be feasible for thicknesses down to three layers of InSe, and the obtained stable InF3 layers are doped with selenium. We study this new 2D material by optical, electron transport, and Raman measurements and show that it is a semiconductor with a direct bandgap of 2.2 eV, exhibiting high optical transparency across the visible and infrared spectral ranges. We also demonstrate the scalability of our approach by chemical conversion of large-area, thin InSe laminates obtained by liquid exfoliation, into InF3 films. The concept of chemical conversion of cleavable thin van der Waals crystals into covalently bonded noncleavable ones opens exciting prospects for synthesizing a wide variety of novel atomically thin covalent crystals.Article Citation - WoS: 18Citation - Scopus: 46Phosphor-Based White Led by Various Glassy Particles:control Over Luminous Efficiency(The Optical Society, 2019) Yüce, Hürriyet; Güner, Tuğrul; Balcı, Sinan; Demir, Mustafa MuammerGenerating white light through a mainstream remote phosphor design suffers from phosphor conversion efficiency loss due to a backscattering of light. Such a loss also reduces luminous efficiency of the resulting white light. To overcome this issue, various glassy scatterers with different morphologies such as glass bubbles, glass beads, and nanosized silica particles were employed as scatterers, together with a fixed amount of yellow phosphor (YAG:Ce3+) and a poly(dimethylsiloxane) (PDMS) matrix. In addition, the simulation of the system validates the rigorous multiple scattering of the incoming light most probably due to refractive index mismatch between the glass bubbles and surrounding PDMS matrix along with the internal reflections. (C) 2019 Optical Society of AmericaArticle Citation - WoS: 3Citation - Scopus: 3Monolayer Aste2: Stable Robust Metal in 2d, 1d and 0d(Wiley, 2018) Badalov, S. V.; Kandemir, Ali; Şahin, HasanThe structural, phononic, and electronic properties of the monolayer structures of AsTe2 are characterized by performing density functional theory (DFT) calculations. Total energy optimization and phonon calculations reveal that single layers of the 2H-AsTe2 and 1T-AsTe2 phases form dynamically stable crystal structures. Electronic structure analysis also shows that both 2H and 1T phases have nonmagnetic metallic character. It is also predicted that the metallic nature of the ultra-thin both 2H-AsTe2 and 1T-AsTe2 structures remain unchanged even under high biaxial strain values. For further examination of the dimensionality effect in the robust metallicity in 2D AsTe2 phases, electronic characteristics of 1D nanoribbons and 0D quantum dots are also investigated. It is found that independent from the dimension and crystallographic orientations 0D and 1D structures of 2H- and 1T-AsTe2 structures have metallic behavior. It is found that single layers of AsTe2 are quite promising materials for nanodevice applications owing to the robust metallic character.Article Citation - WoS: 20Citation - Scopus: 21Monitoring the Effect of Asymmetrical Vertical Strain on Janus Single Layers of Mosse Via Vibrational Spectrum(American Institute of Physics, 2018) Kandemir, Ali; Peeters, François M.; Şahin, HasanUsing first principles calculations, we study the structural and phononic properties of the recently synthesized Janus type single layers of molybdenum dichalcogenides. The Janus MoSSe single layer possesses 2H crystal structure with two different chalcogenide sides that lead to out-of-plane anisotropy. By virtue of the asymmetric structure of the ultra-thin Janus type crystal, we induced the out-of-plane anisotropy to show the distinctive vertical pressure effect on the vibrational properties of the Janus material. It is proposed that for the corresponding Raman active optical mode of the Janus structure, the phase modulation and the magnitude ratio of the strained atom and its first neighbor atom adjust the distinctive change in the eigen-frequencies and Raman activity. Moreover, a strong variation in the Raman activity of the Janus structure is obtained under bivertical and univertical strains. Not only eigen-frequency shifts but also Raman activities of the optical modes of the Janus structure exhibit distinguishable features. This study reveals that the vertical anisotropic feature of the Janus structure under Raman measurement allows us to distinguish which side of the Janus crystal interacts with the externals (substrate, functional adlayers, or dopants).Article Citation - WoS: 370Citation - Scopus: 398Graphene-Based Adaptive Thermal Camouflage(American Chemical Society, 2018) Salihoğlu, Ömer; Uzlu, Hasan Burkay; Yakar, Ozan; Aas, Shahnaz; Balcı, Osman; Kakenov, Nurbek; Balcı, Sinan; Olçum, Selim; Süzer, Şefik; Kocabaş, CoşkunIn nature, adaptive coloration has been effectively utilized for concealment and signaling. Various biological mechanisms have evolved to tune the reflectivity for visible and ultraviolet light. These examples inspire many artificial systems for mimicking adaptive coloration to match the visual appearance to their surroundings. Thermal camouflage, however, has been an outstanding challenge which requires an ability to control the emitted thermal radiation from the surface. Here we report a new class of active thermal surfaces capable of efficient real-time electrical-control of thermal emission over the full infrared (IR) spectrum without changing the temperature of the surface. Our approach relies on electro-modulation of IR absorptivity and emissivity of multilayer graphene via reversible intercalation of nonvolatile ionic liquids. The demonstrated devices are light (30 g/m2), thin (<50 μm), and ultraflexible, which can conformably coat their environment. In addition, by combining active thermal surfaces with a feedback mechanism, we demonstrate realization of an adaptive thermal camouflage system which can reconfigure its thermal appearance and blend itself with the varying thermal background in a few seconds. Furthermore, we show that these devices can disguise hot objects as cold and cold ones as hot in a thermal imaging system. We anticipate that, the electrical control of thermal radiation would impact on a variety of new technologies ranging from adaptive IR optics to heat management for outer space applications.Article Citation - WoS: 28Citation - Scopus: 30P3HT-graphene bilayer electrode for Schottky junction photodetectors(IOP Publishing Ltd., 2018) Aydın, Hasan; Kalkan, Sırrı Batuhan; Varlıklı, Canan; Çelebi, CemWe have investigated the effect of a poly (3-hexylthiophene-2.5-diyl)(P3HT)-graphene bilayer electrode on the photoresponsivity characteristics of Si-based Schottky photodetectors. P3HT, which is known to be an electron donor and absorb light in the visible spectrum, was placed on CVD grown graphene by dip-coating method. The results of the UV-vis and Raman spectroscopy measurements have been evaluated to confirm the optical and electronic modification of graphene by the P3HT thin film. Current-voltage measurements of graphene/Si and P3HT-graphene/Si revealed rectification behavior confirming a Schottky junction formation at the graphene/Si interface. Time-resolved photocurrent spectroscopy measurements showed the devices had excellent durability and a fast response speed. We found that the maximum spectral photoresponsivity of the P3HT-graphene/Si photodetector increased more than three orders of magnitude compared to that of the bare graphene/Si photodetector. The observed increment in the photoresponsivity of the P3HT-graphene/Si samples was attributed to the charge transfer doping from P3HT to graphene within the spectral range between near-ultraviolet and near-infrared. Furthermore, the P3HT-graphene electrode was found to improve the specific detectivity and noise equivalent power of graphene/Si photodetectors. The obtained results showed that the P3HT-graphene bilayer electrodes significantly improved the photoresponsivity characteristics of our samples and thus can be used as a functional component in Si-based optoelectronic device applications.Article Citation - WoS: 67Citation - Scopus: 66Bilayers of Janus Wsse: Monitoring the Stacking Type: Via the Vibrational Spectrum(Royal Society of Chemistry, 2018) Kandemir, Ali; Şahin, HasanMotivated by the recent successful synthesis of Janus type single layers of transition metal dichalcogenides, we investigate the stability, vibrational and electronic properties of the Janus single layer structure of WSSe and its bilayers by means of density functional theory. The structural and vibrational analysis show that the Janus single layer of WSSe forms a dynamically stable structure in the 2H phase. Owing to its non-centrosymmetric structure, the Janus WSSe single layer has two in-plane (E) and two out-of-plane (A) Raman active phonon modes. The eigen-frequencies of the prominent Raman active modes are calculated to be 277 (A) and 322 (E) cm-1. Similar to single layer WS2 and WSe2, Janus WSSe is a direct band gap semiconductor that has two electronically different faces. In addition, the possible bilayer stacking orders of the Janus WSSe single layers are investigated. It is found that there are 3 stacking types of bilayer Janus WSSe and each stacking type has distinctive Raman characteristics in its vibrational spectrum. Our results show that thanks to the vibrational characteristics, which stem from the distinctive interlayer interactions at different sides, the stability and stacking types of the bilayer of WSSe Janus structure can be monitored.Article Citation - WoS: 134Citation - Scopus: 136Electrically Switchable Metadevices Via Graphene(American Association for the Advancement of Science, 2018) Balcı, Osman; Kakenov, Nurbek; Karademir, Ertuğrul; Balcı, Sinan; Çakmakyapan, Semih; Polat, Emre O.; Çağlayan, Hümeyra; Özbay, Ekmel; Kocabaş, ÇoşkunMetamaterials bring subwavelength resonating structures together to overcome the limitations of conventional materials. The realization of active metadevices has been an outstanding challenge that requires electrically reconfigurable components operating over a broad spectrum with a wide dynamic range. However, the existing capability of metamaterials is not sufficient to realize this goal. By integrating passive metamaterials with active graphene devices, we demonstrate a new class of electrically controlled active metadevices working in microwave frequencies. The fabricated active metadevices enable efficient control of both amplitude (>50 dB) and phase (>90°) of electromagnetic waves. In this hybrid system, graphene operates as a tunable Drude metal that controls the radiation of the passive metamaterials. Furthermore, by integrating individually addressable arrays of metadevices, we demonstrate a new class of spatially varying digital metasurfaces where the local dielectric constant can be reconfigured with applied bias voltages. In addition, we reconfigure resonance frequency of split-ring resonators without changing its amplitude by damping one of the two coupled metasurfaces via graphene. Our approach is general enough to implement various metamaterial systems that could yield new applications ranging from electrically switchable cloaking devices to adaptive camouflage systems.
- «
- 1 (current)
- 2
- 3
- »