Photonics / Fotonik
Permanent URI for this collectionhttps://hdl.handle.net/11147/2590
Browse
42 results
Search Results
Article Citation - WoS: 7Citation - Scopus: 7Breaking the Boundaries of the Goldschmidt Tolerance Factor With Ethylammonium Lead Iodide Perovskite Nanocrystals(American Chemical Society, 2024) Güvenç, Çetin Meriç; Toso, Stefano; Ivanov, Yurii P.; Saleh, Gabriele; Balcı, Sinan; Divitini, Giorgio; Manna, LiberatoWe report the synthesis of ethylammonium lead iodide (EAPbI3) colloidal nanocrystals as another member of the lead halide perovskites family. The insertion of an unusually large A-cation (274 pm in diameter) in the perovskite structure, hitherto considered unlikely due to the unfavorable Goldschmidt tolerance factor, results in a significantly larger lattice parameter compared to the Cs-, methylammonium- and formamidinium-based lead halide perovskite homologues. As a consequence, EAPbI3 nanocrystals are highly unstable, evolving to a nonperovskite delta-EAPbI3 polymorph within 1 day. Also, EAPbI3 nanocrystals are very sensitive to electron irradiation and quickly degrade to PbI2 upon exposure to the electron beam, following a mechanism similar to that of other hybrid lead iodide perovskites (although degradation can be reduced by partially replacing the EA+ ions with Cs+ ions). Interestingly, in some cases during this degradation the formation of an epitaxial interface between (EA x Cs1-x )PbI3 and PbI2 is observed. The photoluminescence emission of the EAPbI3 perovskite nanocrystals, albeit being characterized by a low quantum yield (similar to 1%), can be tuned in the 664-690 nm range by regulating their size during the synthesis. The emission efficiency can be improved upon partial alloying at the A site with Cs+ or formamidinium cations. Furthermore, the morphology of the EAPbI3 nanocrystals can be chosen to be either nanocube or nanoplatelet, depending on the synthesis conditions.Book Part Citation - Scopus: 3Advances and Future Perspective of Graphene Field Effect Transistors (gfets) for Medical Diagnostics and Point-Of Tools(World Scientific Publishing, 2022) İnanç, Dilce; Mutlu, Mustafa Umut; Karabacak, Soner; Yıldız, Ümit HakanRecently, major focus has been centered to enhance the capability of graphenebased devices and to facilitate utilization of graphene for biological applications by lowering its toxicity. In this chapter, from synthesis to applications, many of the conspicuous characteristics of graphene have been elaborately reviewed. We primarily focused on graphene-based field effect transistor (FET) for medical diagnostics and point-of-care applications. The device configurations and their application potential as well as sensing capability of various graphene FETs (GFETs) have been discussed. Here, we have also presented several aspects and advantages of GFETs in medical applications while discussing their pros and cons in commercialization. We address the advances and challenges for GFET-based sensing platforms for the medical applications and elaborate the combination strategy of GFETs with the existing commercial systems. © 2023 by World Scientific Publishing Co. Pte. Ltd.Article Citation - WoS: 3Citation - Scopus: 4A Facile Method for Boosting the Graphitic Carbon Nitride's Photocatalytic Activity Based on 0d/2d S-Scheme Heterojunction Nanocomposite Architecture(Elsevier, 2024) Kahraman, Zeynep; Kartal, Uğur; Gent, Aziz; Alp, EmreGraphitic carbon nitride (g-C 3 N 4 ) has received significant interest as a metal -free photocatalyst. The S -scheme photocatalytic system has great potential to improve the charge separation in semiconductor photocatalysts. In this study, we have fabricated non-toxic and low-cost photocatalytic nanocomposites of 0D/2D S -scheme heterojunction composed of iron oxide and graphitic carbon nitride by a facile method. The developed facile method provides a sustainable way with a high atom economy to further enhance the photocatalytic performance of exfoliated g-C 3 N 4 . The 0D -iron oxide/2D-C 3 N 4 exhibited nearly 10 times better than bulk g-C 3 N 4 and almost 60 % better than exfoliated g-C 3 N 4 under simulated solar light irradiation. The experimental results demonstrated that the effective charge -carrier mechanism led to an improved generation of reactive oxygen species (ROSs), resulting in an impressive photocatalytic performance. A serial photocatalytic test was also conducted to understand photocatalytic reaction mechanisms with various scavengers.Article Citation - WoS: 6Citation - Scopus: 6Polar Solvent-Free Room Temperature Synthesis of Cspbx3 (x = Br, Cl) Perovskite Nanocubes(Royal Society of Chemistry, 2023) Güvenç, Çetin Meriç; Kocabaş, Aşkın; Balcı, SinanConventionally, colloidal lead halide perovskite nanocubes have been synthesized by the hot-injection or ligand-assisted reprecipitation (LARP) methods. We herein demonstrate a polar solvent-free room temperature method for the synthesis of CsPbX3 (X = Br, Cl) nanocubes. In addition to the commonly used ligand pair of oleylamine and oleic acid, guanidinium (GA) has been used to passivate the surface of the nanocrystals. Our study demonstrates that GA inhibits the formation of low dimensional structures such as nanowires and nanoplatelets and further supports the formation of perovskite nanocubes. In fact, GA diminishes the restricted monomer-addition effect of long-chain oleylammonium (OLAM) ions to the nanocrystal. We show that above a critical GA/OLAM molar ratio, the synthesis yields homogeneous CsPbX3 (X = Br, Cl) nanocubes. Importantly, we observe the nucleation and growth kinetics of the GA-assisted CsPbBr3 nanocube formation by using in situ absorption and photoluminescence (PL) measurements. Small nanocrystals with an excitonic absorption peak at around 435 nm and photoluminescence (PL) maxima at 447 nm were nucleated and continuously shifted to longer wavelengths during the growth period. Crucially, our method allows the synthesis of CsPbCl3 nanocubes at room temperature without using polar organic solvents. The synthesized CsPbBr3, CsPb(Cl0.5Br0.5)3, and CsPbCl3 nanocubes have PL peaks at 508 nm, 443 nm, and 405 nm, photoluminescence quantum yields (PLQY) of 85%, 58% and 5%, and lifetimes of 18.98 ns, 18.97 ns, and 14.74 ns, respectively.Article Citation - WoS: 49Citation - Scopus: 54Highly Porous Poly(o-Phenylenediamine) Loaded Magnetic Carboxymethyl Cellulose Hybrid Beads for Removal of Two Model Textile Dyes(Springer, 2022) Arıca, Tuğçe Aybüke; Balcı, Fadime Mert; Balcı, Sinan; Arıca, Mehmet YakupEnsuring the removal of complex dyes from wastewater is a topic of great interest as it is vital for the environment. The present study reports a facile preparation method for poly(o-phenylenediamine) [p(o-PDA)] micro-particles loaded to magnetic carboxymethyl cellulose (CMC) hydrogel beads as adsorbents. The prepared products were characterized by FTIR, TGA, VSM, SEM, BET, and zeta sizer. The Fe3O4@p(o-PDA)@CMC beads were used for the removal of Reactive Blue 4 (RB-4) and Congo Red (CR) textile dyes from an aqueous medium. Different factors, such as adsorbent dose, initial pH, ionic strength, contact time, temperatures, and initial RB-4 and CR concentrations were examined. The maximum adsorption capacities of the RB-4 dye and CR at optimum pH 5 reached 398.7 and 524.6 mg/g in 120 min, respectively. The adsorption of RB-4 and CR on the hybrid magnetic beads can be due to the electrostatic, hydrogen bonding, and π-π interactions. Moreover, the magnetic hybrid beads showed easy regeneration ability and good reusability. The adsorbent can be a very good candidate for the efficient removal of micro-pollutant from wastewater.Article Citation - WoS: 13Citation - Scopus: 14Synthesis of Albumin Nanoparticles in a Water-Miscible Ionic Liquid System, and Their Applications for Chlorambucil Delivery To Cancer Cells(Elsevier, 2022) Akdoğan, Yaşar; Sözer, Sümeyra Çiğdem; Akyol, Cansu; Başol, Merve; Karakoyun, Çiğdem; Çakan Akdoğan, GülçinSerum albumin has been a preferred protein to generate biodegradable and non-toxic nanoparticles (NPs) for drug delivery applications. Different methods applied for the preparation of serum albumin NPs mostly used organic solvents. Here, we prepared serum albumin NPs in an ionic liquid (IL) system. ILs are considered to be green and designer solvents with unique properties that can replace organic solvents in the synthesis of albumin NPs. Bovine serum albumin (BSA) proteins dissolved in water were transformed into BSA NPs in a water/ Triton™X (TX-100), 1-butanol/1-butyl-3-methylimidazolium trifluoromethanesulfonate (BmimCF3SO3) microemulsion-like system by using a high-speed homogenizer and crosslinker glutaraldehyde. The obtained BSA NPs have been used in drug loading and release studies with a hydrophobic anticancer drug chlorambucil (Chl). Drug loading increased as increasing the ratio of Chl incubated with BSA NPs. Monitoring the drug release by UV–Vis spectroscopy revealed a burst release at first 4 h, but two-thirds of drugs stayed with NPs upon diffusion method. On the other hand, cellular uptake of Chl loaded BSA NPs caused a significant MCF7 breast cancer cell death, whereas free Chl and unloaded BSA NPs did not have a significant effect on the cell viability. Furthermore, in vivo toxicity assessment of BSA NPs obtained in the IL system was conducted in the zebrafish animal model. It showed that zebrafish body is able to eliminate BSA NPs without any toxic side effects and encapsulation of Chl into NPs reduced the toxicity of free Chl. In summary, we showed that BSA NPs with size smaller than 200 nm could be prepared in BmimCF3SO3 mediated system. They can be used for Chl loading (up to 6.9 wt%) with a sustainable release and they induce significant cell death in Chl sensitive cancer cells up to 45% in 24 h. These results indicate that BSA NPs could be prepared alternatively in IL systems and used in drug delivery studies.Article Citation - WoS: 2Citation - Scopus: 5Experimental Modeling of Antimony Sulfides-Rich Geothermal Deposits and Their Solubility in the Presence of Polymeric Antiscalants(Elsevier, 2022) Karaburun, Emre; Sözen, Yiğit; Çiftçi, Celal; Şahin, Hasan; Baba, Alper; Akbey, Ümit; Yeşilnacar, Mehmet İrfan; Erdim, Eray; Regenspurg, Simona; Demir, Mustafa MuammerAntimony (Sb)-rich geothermal deposits have been observed in many geothermal power plants worldwide. They occur as red-colored, sulfidic precipitates disturbing energy-harvesting by clogging the geothermal installations. In order to prevent the formation of this scale, information on its physicochemical features is needed. For this purpose, Sb-rich sulfide-based deposits were synthesized at controlled conditions in a pressurized glass reactor at geothermal conditions (135 °C and 3.5 bar). Various polymeric antiscalants with different functional groups, such as acrylic acid, sulphonic acid, and phosphonic acid groups were tested for their effect on Sb sulfide solubility. An additional computational study was performed to determine the binding energy of Sb and S atoms to these groups. The results suggest that sulfonic acid groups are the most affective. Therefore, it was concluded that these macromolecule containing sulfonic acid groups and poly (vinyl sulfonic acid) derivatives could potentially act as antiscalants for the formation of antimony sulfide.Article Citation - WoS: 7Citation - Scopus: 6L2[gaxfa1–xpbi3]pbi4 (0 ≤ X ≤ 1) Ruddlesden–popper Perovskite Nanocrystals for Solar Cells and Light-Emitting Diodes(American Chemical Society, 2022) Güvenç, Çetin Meriç; Tunç, İlknur; Balcı, SinanThe main challenges to overcome for colloidal 2D Ruddlesden–Popper (RP) organo-lead iodide perovskite nanocrystals (NCs) are phase instability and low photoluminescence quantum yield (PLQY). Herein, we demonstrate colloidal synthesis of guanidinium (GA)-L2[GAPbI3]PbI4, formamidinium (FA)-L2[FAPbI3]PbI4, and GA and FA alloyed L2[GA0.5FA0.5PbI3]PbI4 NCs without using polar or high boiling point nonpolar solvents. Importantly, we show that optical properties and phase stability of L2[APbI3]PbI4 NCs can be affectively tuned by alloying with guanidinium and formamidinium cations. Additionally, the band gap of NCs can be rapidly engineered by bromide ion exchange in L2[GAxFA1–xPbI3]PbI4 (0 ≤ x ≤ 1) NCs. Our approach produces a stable dispersion of L2[FAPbI3]PbI4 NCs with 12.6% PLQY that is at least three times higher than the previously reported PLQY in the nanocrystals. Furthermore, L2[GAPbI3]PbI4 and L2[GA0.5FA0.5PbI3]PbI4 NC films exhibit improved ambient stability over 10 days, which is significantly higher than L2[FAPbI3]PbI4 NC films, which transform to an undesired 1D phase within 6 days. The colloidally synthesized guanidinium- and formamidinium-based 2D RP organo-lead iodide perovskite NCs with improved stability and high PLQY demonstrated in this study may find applications in solar cells and light-emitting diodes. Therefore, large A-site cation-alloyed 2D RP perovskite NCs may provide a new way to rationalize high-performance and stable perovskite solar cells and light-emitting diodes.Article Citation - WoS: 7Citation - Scopus: 6Anisotropic Etching of Cvd Grown Graphene for Ammonia Sensing(Institute of Electrical and Electronics Engineers Inc., 2022) Yağmurcukardeş, Nesli; Bayram, Abdullah; Aydın, Hasan; Yağmurcukardeş, Mehmet; Açıkbaş, Yaser; Peeters, François M.; Çelebi, CemBare chemical vapor deposition (CVD) grown graphene (GRP) was anisotropically etched with various etching parameters. The morphological and structural characterizations were carried out by optical microscopy and the vibrational properties substrates were obtained by Raman spectroscopy. The ammonia adsorption and desorption behavior of graphene-based sensors were recorded via quartz crystal microbalance (QCM) measurements at room temperature. The etched samples for ambient NH3 exhibited nearly 35% improvement and showed high resistance to humidity molecules when compared to bare graphene. Besides exhibiting promising sensitivity to NH3 molecules, the etched graphene-based sensors were less affected by humidity. The experimental results were collaborated by Density Functional Theory (DFT) calculations and it was shown that while water molecules fragmented into H and O, NH3 interacts weakly with EGPR2 sample which reveals the enhanced sensing ability of EGPR2. Apparently, it would be more suitable to use EGRP2 in sensing applications due to its sensitivity to NH3 molecules, its stability, and its resistance to H2O molecules in humid ambient.Article Citation - WoS: 7Citation - Scopus: 8Seed-Mediated Synthesis of Colloidal 2d Halide Perovskite Nanoplatelets(Wiley, 2021) Güvenç, Çetin Meriç; Balcı, SinanColloidal synthesis of two-dimensional lead halide perovskite nanoplatelets (2D LHP NPLs) with a general formula of L-2[APbX(3)](n-1)PbX4 has been widely performed by using hot-injection or ligand assisted reprecipitation methods. Herein, for the first time, we report on seed-mediated synthesis of two and three monolayers (n=2, 3) lead halide perovskite nanoplatelets without using A-site cation halide salt (AX; A=Cesium, methylammonium, formamidinium and, X=Cl, Br, I) and long chain alkylammonium halide salts (LX; L=oleylammonium, octylammonium, butylammonium and, X=Cl, Br, I). The nanocrystal seeds have been prepared by reacting lead (II) halide salt and coordinating ligands in a nonpolar solvent and then they have been reacted with cesium oleate, formamidinium oleate or methylamine. Our facile synthesis route enabling further understanding of the growth dynamics of LHP NPLs provides highly stable, monodisperse NPLs with very narrow absorption and emission linewidths (min. 68 meV), and high PLQY (max. 37.6%).