Photonics / Fotonik
Permanent URI for this collectionhttps://hdl.handle.net/11147/2590
Browse
12 results
Search Results
Article Citation - WoS: 1Citation - Scopus: 1A Multi-Layered Graphene Based Gas Sensor Platform for Discrimination of Volatile Organic Compounds Via Differential Intercalation(Royal Society of Chemistry, 2023) Özkendir İnanç, Dilce; Ng, Zhi Kai; Başkurt, Mehmet; Keleş, Berfin; Vardar, Gökay; Şahin, Hasan; Tsang, Siu Hon; Palaniappan, Alagappan; Yıldız, Ümit Hakan; Teo, EhtSelective and sensitive detection of volatile organic compounds (VOCs) is of critical importance for environmental monitoring, disease diagnosis and industrial applications. Among VOCs, assay development for primary alcohols has captured significant research attention since their toxicity causes adverse effects on gastrointestinal and central nerve systems, resulting in irreversible blindness, and coma, and can be even fatal at high exposure levels. However, selective detection of primary alcohols is extremely challenging owing to the similarity in their molecular structure and characteristic groups. Herein, we have attempted to investigate the differential methanol (MeOH)-ethanol (EtOH) discriminative properties of single-layer, bi-layer, and multi-layer graphene morphologies. Chemiresistors fabricated using the three morphologies of graphene illustrate discriminative MeOH-EtOH responses, which is attributed to the phenomenon of differential intercalation of MeOH within layered graphene morphologies as compared to that of EtOH. This hypothesis is verified by density functional theory calculations, which revealed that the adsorption of EtOH molecules on the graphene surface is more energetically favorable as compared to that of MeOH molecules, thereby inhibiting their intercalation within the layered graphene morphologies. It is further evaluated that the degree of MeOH intercalation increases with increasing layers of graphene for obtaining differential MeOH-EtOH responses. Experimental results suggest possibilities to develop selective and sensitive MeOH assays fabricated using various graphene morphologies in a combinatorial sensor array format.Article Citation - WoS: 3Citation - Scopus: 3Stable Single Layer Structures of Aluminum Oxide: Vibrational and Electronic Characterization of Magnetic Phases(Elsevier, 2022) Özyurt, A. Kutay; Molavali, Deniz; Şahin, HasanThe structural, magnetic, vibrational and electronic properties of single layer aluminum oxide (AlO2) are investigated by performing state-of-the-art first-principles calculations. Total energy optimization and phonon calculations reveal that aluminum oxide forms a distorted octahedral structure (1T′-AlO2) in its single layer limit. It is also shown that surfaces of 1T′-AlO2 display magnetic behavior originating from the O atoms. While the ferromagnetic (FM) state is the most favorable magnetic order for 1T′-AlO2, transformation to a dynamically stable antiferromagnetic (AFM) state upon a slight distortion in the crystal structure is also possible. It is also shown that Raman activities (350–400 cm−1) obtained from the vibrational spectrum can be utilized to distinguish the possible magnetic phases of the crystal structure. Electronically, both FM and the AFM phases are semiconductors with an indirect band gap and they can form a type-III vdW heterojunction with graphene-like ultra-thin materials. Moreover, it is predicted that presence of oxygen defects that inevitably occur during synthesis and production do not alter the magnetic state, even at high vacancy density. Apparently, ultra-thin 1T′-AlO2 with its stable crystal structure, semiconducting nature and robust magnetic state is a quite promising material for nanoscale device applications.Article Citation - WoS: 32Citation - Scopus: 31Wien Effect in Interfacial Water Dissociation Through Proton-Permeable Graphene Electrodes(Nature Research, 2022) Cai, Junhao; Griffin, Eoin; Guarochico-Moreira, Victor H.; Barry, D.; Xin, B.; Yağmurcukardeş, Mehmet; Zhang, Sheng; Geim, Andre K.; Peeters, François M.; Lozada-Hidalgo, MarceloStrong electric fields can accelerate molecular dissociation reactions. The phenomenon known as the Wien effect was previously observed using high-voltage electrolysis cells that produced fields of about 107 V m−1, sufficient to accelerate the dissociation of weakly bound molecules (e.g., organics and weak electrolytes). The observation of the Wien effect for the common case of water dissociation (H2O ⇆ H+ + OH−) has remained elusive. Here we study the dissociation of interfacial water adjacent to proton-permeable graphene electrodes and observe strong acceleration of the reaction in fields reaching above 108 V m−1. The use of graphene electrodes allows measuring the proton currents arising exclusively from the dissociation of interfacial water, while the electric field driving the reaction is monitored through the carrier density induced in graphene by the same field. The observed exponential increase in proton currents is in quantitative agreement with Onsager’s theory. Our results also demonstrate that graphene electrodes can be valuable for the investigation of various interfacial phenomena involving proton transport.Article Citation - WoS: 7Citation - Scopus: 6Anisotropic Etching of Cvd Grown Graphene for Ammonia Sensing(Institute of Electrical and Electronics Engineers Inc., 2022) Yağmurcukardeş, Nesli; Bayram, Abdullah; Aydın, Hasan; Yağmurcukardeş, Mehmet; Açıkbaş, Yaser; Peeters, François M.; Çelebi, CemBare chemical vapor deposition (CVD) grown graphene (GRP) was anisotropically etched with various etching parameters. The morphological and structural characterizations were carried out by optical microscopy and the vibrational properties substrates were obtained by Raman spectroscopy. The ammonia adsorption and desorption behavior of graphene-based sensors were recorded via quartz crystal microbalance (QCM) measurements at room temperature. The etched samples for ambient NH3 exhibited nearly 35% improvement and showed high resistance to humidity molecules when compared to bare graphene. Besides exhibiting promising sensitivity to NH3 molecules, the etched graphene-based sensors were less affected by humidity. The experimental results were collaborated by Density Functional Theory (DFT) calculations and it was shown that while water molecules fragmented into H and O, NH3 interacts weakly with EGPR2 sample which reveals the enhanced sensing ability of EGPR2. Apparently, it would be more suitable to use EGRP2 in sensing applications due to its sensitivity to NH3 molecules, its stability, and its resistance to H2O molecules in humid ambient.Article Citation - WoS: 13Citation - Scopus: 15Hybrid J-aggregate-graphene phototransistor(American Chemical Society, 2020) Yakar, Ozan; Balcı, Osman; Uzlu, Burkay; Polat, Nahit; Arı, Ozan; Tunç, İlknur; Balcı, SinanJ-aggregates are fantastic self-assembled chromophores with a very narrow and extremely sharp absorbance band in the visible and near-infrared spectrum, and hence they have found many exciting applications in nonlinear optics, sensing, optical devices, photography, and lasing. In silver halide photography, for example, they have enormously improved the spectral sensitivity of photographic process due to their fast and coherent energy migration ability. On the other hand, graphene, consisting of single layer of carbon atoms forming a hexagonal lattice, has a very low absorption coefficient. Inspired by the fact that J-aggregates have carried the role to sense the incident light in silver halide photography, we would like to use Jaggregates to increase spectral sensitivity of graphene in the visible spectrum. Nevertheless, it has been an outstanding challenge to place isolated J-aggregate films on graphene to extensively study interaction between them. We herein noncovalently fabricate isolated J-aggregate thin films on graphene by using a thin film fabrication technique we termed here membrane casting (MC). MC significantly simplifies thin film formation of water-soluble substances on any surface via porous polymer membrane. Therefore, we reversibly modulate the Dirac point of graphene in the J-aggregate/graphene van der Waals (vdW) heterostructure and demonstrate an all-carbon phototransistor gated by visible light. Owing to the hole transfer from excited excitonic thin film to graphene layer, graphene is hole-doped. In addition, spectral and power responses of the all-carbon phototransistor have been measured by using a tunable laser in the visible spectrum. The first integration of J-aggregates with graphene in a transistor structure enables one to reversibly write and erase charge doping in graphene with visible light that paves the way for using J-aggregate/graphene vdW heterostructures in optoelectronic applications.Article Citation - WoS: 5Citation - Scopus: 6Contribution of O-2 Plasma Treatment and Amine Modified Gos on Film Properties of Conductive Pedot:pss: Application in Indium Tin Oxide Free Solution Processed Blue Oled(Elsevier, 2019) Diker, Halide; Yeşil, Fatih; Varlıklı, CananPrimary (n-propyl amine, n-PRYLA), secondary (dipropyl amine, DPRYLA) and alcohol (propanol amine, PRPOHA) amine derivatives were used as amine sources in graphene oxide (GO) modification and obtained samples were named as nPRYLA-GO, DPRYLA-GO and PRPOHA-GO, respectively. Modified graphene oxide (mGO) derivatives were doped in poly (3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PH1000) and O-2 plasma treatment (70W, 3 min) was applied on the spin casted films. PH1000:mGO films presented high optical transparency values (> 90%) and low resistivity (177-183 Q/sq). The roughness values were increased especially when the hydrophobic alkyl chain containing DPRYLA-GO and nPRYLA-GO were doped in PH1000. Prepared films were utilized as anode in solution processed blue organic light emitting diode. PH1000:PRPOHA-GO anode presented more than 30 nm of decrement in full with at half maximum and 1.6, 1.5 and 1.9 fold enhancements in current, power and external quantum efficiency values, compared to those of ITO anode, respectively.Article Citation - WoS: 11Citation - Scopus: 11Graphene-Quantum Dot Hybrid Optoelectronics at Visible Wavelengths(American Chemical Society, 2018) Salihoğlu, Ömer; Kakenov, Nurbek; Balcı, Osman; Balcı, Sinan; Kocabaş, ÇoşkunWith exceptional electronic and gate-tunable optical properties, graphene provides new possibilities for active nanophotonic devices. Requirements of very large carrier density modulation, however, limit the operation of graphene based optical devices in the visible spectrum. Here, we report a unique approach that avoids these limitations and implements graphene into optoelectronic devices working in the visible spectrum. The approach relies on controlling nonradiative energy transfer between colloidal quantum-dots and graphene through gate-voltage induced tuning of the charge density of graphene. We demonstrate a new class of large area optoelectronic devices including fluorescent display and voltage-controlled color-variable devices working in the visible spectrum. We anticipate that the presented technique could provide new practical routes for active control of light-matter interaction at the nanometer scale, which could find new implications ranging from display technologies to quantum optics.Article Citation - WoS: 28Citation - Scopus: 30P3HT-graphene bilayer electrode for Schottky junction photodetectors(IOP Publishing Ltd., 2018) Aydın, Hasan; Kalkan, Sırrı Batuhan; Varlıklı, Canan; Çelebi, CemWe have investigated the effect of a poly (3-hexylthiophene-2.5-diyl)(P3HT)-graphene bilayer electrode on the photoresponsivity characteristics of Si-based Schottky photodetectors. P3HT, which is known to be an electron donor and absorb light in the visible spectrum, was placed on CVD grown graphene by dip-coating method. The results of the UV-vis and Raman spectroscopy measurements have been evaluated to confirm the optical and electronic modification of graphene by the P3HT thin film. Current-voltage measurements of graphene/Si and P3HT-graphene/Si revealed rectification behavior confirming a Schottky junction formation at the graphene/Si interface. Time-resolved photocurrent spectroscopy measurements showed the devices had excellent durability and a fast response speed. We found that the maximum spectral photoresponsivity of the P3HT-graphene/Si photodetector increased more than three orders of magnitude compared to that of the bare graphene/Si photodetector. The observed increment in the photoresponsivity of the P3HT-graphene/Si samples was attributed to the charge transfer doping from P3HT to graphene within the spectral range between near-ultraviolet and near-infrared. Furthermore, the P3HT-graphene electrode was found to improve the specific detectivity and noise equivalent power of graphene/Si photodetectors. The obtained results showed that the P3HT-graphene bilayer electrodes significantly improved the photoresponsivity characteristics of our samples and thus can be used as a functional component in Si-based optoelectronic device applications.Article Citation - WoS: 8Citation - Scopus: 10Experimental and Computational Investigation of Graphene/Sams Schottky Diodes(Elsevier Ltd., 2018) Aydın, Hasan; Bacaksız, Cihan; Yağmurcukardeş, Nesli; Karakaya, Caner; Mermer, Ömer; Can, Mustafa; Senger, Ramazan Tuğrul; Şahin, Hasan; Selamet, YusufWe have investigated the effect of two different self-assembled monolayers (SAMs) on electrical characteristics of bilayer graphene (BLG)/n-Si Schottky diodes. Novel 4″bis(diphenylamino)-1, 1′:3″-terphenyl-5′ carboxylic acids (TPA) and 4,4-di-9H-carbazol-9-yl-1,1′:3′1′-terphenyl-5′ carboxylic acid (CAR) aromatic SAMs have been used to modify n-Si surfaces. Cyclic voltammetry (CV) and Kelvin probe force microscopy (KPFM) results have been evaluated to verify the modification of n-Si surface. The current–voltage (I–V) characteristics of bare and SAMs modified devices show rectification behaviour verifying a Schottky junction at the interface. The ideality factors (n) from ln(I)–V dependences were determined as 2.13, 1.96 and 2.07 for BLG/n-Si, BLG/TPA/n-Si and BLG/CAR/n-Si Schottky diodes, respectively. In addition, Schottky barrier height (SBH) and series resistance (R s ) of SAMs modified diodes were decreased compared to bare diode due to the formation of a compatible interface between graphene and Si as well as π–π interaction between aromatic SAMs and graphene. The CAR-based device exhibits better diode characteristic compared to the TPA-based device. Computational simulations show that the BLG/CAR system exhibits smaller energy-level-differences than the BLG/TPA, which supports the experimental findings of a lower Schottky barrier and series resistance in BLG/CAR diode.Article Citation - WoS: 134Citation - Scopus: 136Electrically Switchable Metadevices Via Graphene(American Association for the Advancement of Science, 2018) Balcı, Osman; Kakenov, Nurbek; Karademir, Ertuğrul; Balcı, Sinan; Çakmakyapan, Semih; Polat, Emre O.; Çağlayan, Hümeyra; Özbay, Ekmel; Kocabaş, ÇoşkunMetamaterials bring subwavelength resonating structures together to overcome the limitations of conventional materials. The realization of active metadevices has been an outstanding challenge that requires electrically reconfigurable components operating over a broad spectrum with a wide dynamic range. However, the existing capability of metamaterials is not sufficient to realize this goal. By integrating passive metamaterials with active graphene devices, we demonstrate a new class of electrically controlled active metadevices working in microwave frequencies. The fabricated active metadevices enable efficient control of both amplitude (>50 dB) and phase (>90°) of electromagnetic waves. In this hybrid system, graphene operates as a tunable Drude metal that controls the radiation of the passive metamaterials. Furthermore, by integrating individually addressable arrays of metadevices, we demonstrate a new class of spatially varying digital metasurfaces where the local dielectric constant can be reconfigured with applied bias voltages. In addition, we reconfigure resonance frequency of split-ring resonators without changing its amplitude by damping one of the two coupled metasurfaces via graphene. Our approach is general enough to implement various metamaterial systems that could yield new applications ranging from electrically switchable cloaking devices to adaptive camouflage systems.