Photonics / Fotonik

Permanent URI for this collectionhttps://hdl.handle.net/11147/2590

Browse

Filters

2016 - 2019192020 - 20247

Settings

Department: search.filters.department.İzmir Institute of Technology. Materials Science and EngineeringScopus Q: search.filters.scopusQuartile.Q2

Search Results

Now showing 1 - 10 of 26
  • Article
    Citation - WoS: 3
    Citation - Scopus: 4
    A Facile Method for Boosting the Graphitic Carbon Nitride's Photocatalytic Activity Based on 0d/2d S-Scheme Heterojunction Nanocomposite Architecture
    (Elsevier, 2024) Kahraman, Zeynep; Kartal, Uğur; Gent, Aziz; Alp, Emre
    Graphitic carbon nitride (g-C 3 N 4 ) has received significant interest as a metal -free photocatalyst. The S -scheme photocatalytic system has great potential to improve the charge separation in semiconductor photocatalysts. In this study, we have fabricated non-toxic and low-cost photocatalytic nanocomposites of 0D/2D S -scheme heterojunction composed of iron oxide and graphitic carbon nitride by a facile method. The developed facile method provides a sustainable way with a high atom economy to further enhance the photocatalytic performance of exfoliated g-C 3 N 4 . The 0D -iron oxide/2D-C 3 N 4 exhibited nearly 10 times better than bulk g-C 3 N 4 and almost 60 % better than exfoliated g-C 3 N 4 under simulated solar light irradiation. The experimental results demonstrated that the effective charge -carrier mechanism led to an improved generation of reactive oxygen species (ROSs), resulting in an impressive photocatalytic performance. A serial photocatalytic test was also conducted to understand photocatalytic reaction mechanisms with various scavengers.
  • Article
    Citation - WoS: 49
    Citation - Scopus: 54
    Highly Porous Poly(o-Phenylenediamine) Loaded Magnetic Carboxymethyl Cellulose Hybrid Beads for Removal of Two Model Textile Dyes
    (Springer, 2022) Arıca, Tuğçe Aybüke; Balcı, Fadime Mert; Balcı, Sinan; Arıca, Mehmet Yakup
    Ensuring the removal of complex dyes from wastewater is a topic of great interest as it is vital for the environment. The present study reports a facile preparation method for poly(o-phenylenediamine) [p(o-PDA)] micro-particles loaded to magnetic carboxymethyl cellulose (CMC) hydrogel beads as adsorbents. The prepared products were characterized by FTIR, TGA, VSM, SEM, BET, and zeta sizer. The Fe3O4@p(o-PDA)@CMC beads were used for the removal of Reactive Blue 4 (RB-4) and Congo Red (CR) textile dyes from an aqueous medium. Different factors, such as adsorbent dose, initial pH, ionic strength, contact time, temperatures, and initial RB-4 and CR concentrations were examined. The maximum adsorption capacities of the RB-4 dye and CR at optimum pH 5 reached 398.7 and 524.6 mg/g in 120 min, respectively. The adsorption of RB-4 and CR on the hybrid magnetic beads can be due to the electrostatic, hydrogen bonding, and π-π interactions. Moreover, the magnetic hybrid beads showed easy regeneration ability and good reusability. The adsorbent can be a very good candidate for the efficient removal of micro-pollutant from wastewater.
  • Article
    Citation - WoS: 2
    Citation - Scopus: 5
    Experimental Modeling of Antimony Sulfides-Rich Geothermal Deposits and Their Solubility in the Presence of Polymeric Antiscalants
    (Elsevier, 2022) Karaburun, Emre; Sözen, Yiğit; Çiftçi, Celal; Şahin, Hasan; Baba, Alper; Akbey, Ümit; Yeşilnacar, Mehmet İrfan; Erdim, Eray; Regenspurg, Simona; Demir, Mustafa Muammer
    Antimony (Sb)-rich geothermal deposits have been observed in many geothermal power plants worldwide. They occur as red-colored, sulfidic precipitates disturbing energy-harvesting by clogging the geothermal installations. In order to prevent the formation of this scale, information on its physicochemical features is needed. For this purpose, Sb-rich sulfide-based deposits were synthesized at controlled conditions in a pressurized glass reactor at geothermal conditions (135 °C and 3.5 bar). Various polymeric antiscalants with different functional groups, such as acrylic acid, sulphonic acid, and phosphonic acid groups were tested for their effect on Sb sulfide solubility. An additional computational study was performed to determine the binding energy of Sb and S atoms to these groups. The results suggest that sulfonic acid groups are the most affective. Therefore, it was concluded that these macromolecule containing sulfonic acid groups and poly (vinyl sulfonic acid) derivatives could potentially act as antiscalants for the formation of antimony sulfide.
  • Article
    Citation - WoS: 12
    Citation - Scopus: 14
    Laser Assisted Synthesis of Anisotropic Metal Nanocrystals and Strong Light-Matter Coupling in Decahedral Bimetallic Nanocrystals
    (Royal Society of Chemistry, 2021) Mert Balcı, Fadime; Sarısözen, Sema; Polat, Nahit; Güvenç, Çetin Meriç; Karadeniz, Uğur; Tertemiz, Necip Ayhan; Balcı, Sinan
    The advances in colloid chemistry and nanofabrication allowed us to synthesize noble monometallic and bimetallic nanocrystals with tunable optical properties in the visible and near infrared region of the electromagnetic spectrum. In the strong coupling regime, surface plasmon polaritons (SPPs) of metal nanoparticles interact with excitons of quantum dots or organic dyes and plasmon-exciton hybrid states called plexcitons are formed. Until now, various shaped metal nanoparticles such as nanorods, core-shell nanoparticles, hollow nanoparticles, nanoprisms, nanodisks, nanorings, and nanobipyramids have been synthesized to generate plasmon-exciton mixed states. However, in order to boost plasmon-exciton interaction at nanoscale dimensions and expand the application of plexcitonic nanocrystals in a variety of fields such as solar cells, light emitting diodes, and nanolasers, new plexcitonic nanocrystals with outstanding optical and chemical properties remain a key goal and challenge. Here we report laser-assisted synthesis of decahedral shaped noble metal nanocrystals, tuning optical properties of the decahedral shaped nanocrystals by galvanic replacement reactions, colloidal synthesis of bimetallic decahedral shaped plexcitonic nanocrystals, and strong plasmon-plasmon interaction in bimetallic decahedral shaped noble metal nanocrystals near a metal film. We photochemically synthesize decahedral Ag nanoparticles from spherical silver nanoparticles by using a 488 nm laser. The laser assisted synthesis of silver nanoparticles yields decahedral (bicolored) and prism (monocolored) shaped silver nanocrystals. The decahedral shaped nanoparticles were selectively separated from prism shaped nanoparticles by centrifugation. The optical properties of decahedral nanocrystals were tuned by the galvanic replacement reaction between gold ions and silver atoms. Excitons of J-aggregate dyes and SPPs of decahedral bimetallic nanoparticles strongly couple and hence decahedral shaped plexcitonic nanoparticles are prepared. In addition, localized SPPs of decahedral shaped bimetallic nanocrystals interact strongly with the propagating SPPs of a flat silver film and hence new hybrid plasmonic modes (plasmonic nanocavities) are generated. The experimental results are further fully corroborated by theoretical calculations including decahedral shaped plexcitonic nanoparticles and decahedral nanoparticles coupled to flat metal films.
  • Article
    Citation - WoS: 3
    Citation - Scopus: 3
    Green Fabrication of Lanthanide-Doped Hydroxide-Based Phosphors: Y(oh)(3):eu3+ Nanoparticles for White Light Generation
    (Beilstein-Institut Zur Forderung der Chemischen Wissenschaften, 2019) Güner, Tuğrul; Kuş, Anılcan; Özcan, Mehmet; Genç, Aziz; Şahin, Hasan; Demir, Mustafa Muammer
    Phosphors can serve as color conversion layers to generate white light with varying optical features, including color rendering index (CRI), high correlated color temperature (CCT), and luminous efficacy. However, they are typically produced under harsh synthesis conditions such as high temperature, high pressure, and/or by employing a large amount of solvent. In this work, a facile, water-based, rapid method has been proposed to fabricate lanthanide-doped hydroxide-based phosphors. In this sense, sub-micrometer-sized Y(OH)(3):Eu3+ particles (as red phosphor) were synthesized in water at ambient conditions in <= 60 min reaction time. The doping ratio was controlled from 2.5-20 mol %. Additionally, first principle calculations were performed on Y(OH)(3):Eu3+ to understand the preferable doping scenario and its optoelectronic properties. As an application, these fabricated red phosphors were integrated into a PDMS/YAG:Ce3+ composite and used to generate white light. The resulting white light showed a remarkable improvement (approximate to 24%) in terms of luminous efficiency, a slight reduction of CCT (from 3900 to 3600 K), and an unchanged CRI (approximate to 60) as the amount of Y(OH)(3):Eu3+ was increased.
  • Article
    Citation - WoS: 3
    Citation - Scopus: 4
    Experimental and First-Principles Investigation of Cr-Driven Color Change in Cesium Lead Halide Perovskites
    (American Institute of Physics, 2019) Özen, Sercan; Güner, Tuğrul; Topçu, Gökhan; Özcan, Mehmet; Demir, Mustafa Muammer; Şahin, Hasan
    Herein, we report room temperature Cr-doping for all-inorganic perovskites that have attracted great attention in recent years due to their extraordinary optical properties, low cost, and ease of synthesis. Incorporation of Cr 3 + ions into the perovskite crystal lattices is achieved by following a facile route involving an antisolvent recrystallization method at room temperature. It is shown that both Cr-doping and formation of crystals in the CsPbBr x Cl 3 - x phase are provided by increasing the concentration of the CrCl 3 solution. It is also observed that the doping procedure leads to the emergence of three types of distinctive peaks in the PL spectrum originating from CsPbBr x Cl 3 - x domains (476-427nm), Cr-strained host lattices (515nm), and midgap states formed by Cr dopants (675-775nm). It is also found that the Cr-doped perovskites emitting a dark violaceous color change their color to white with a high color rendering index (88) in 30-day time intervals. Easy-tunable optical properties of all-inorganic Cs perovskites indicate their great potential for future optoelectronic device applications.
  • Article
    Citation - WoS: 89
    Citation - Scopus: 85
    Cspbbr3 Perovskites: Theoretical and Experimental Investigation on Water-Assisted Transition From Nanowire Formation To Degradation
    (American Physical Society, 2018) Akbalı, Barış; Topçu, Gökhan; Güner, Tuğrul; Özcan, Mehmet; Demir, Mustafa Muammer; Şahin, Hasan
    Recent advances in colloidal synthesis methods have led to an increased research focus on halide perovskites. Due to the highly ionic crystal structure of perovskite materials, a stability issue pops up, especially against polar solvents such as water. In this study, we investigate water-driven structural evolution of CsPbBr3 by performing experiments and state-of-the-art first-principles calculations. It is seen that while an optical image shows the gradual degradation of the yellowish CsPbBr3 structure under daylight, UV illumination reveals that the degradation of crystals takes place in two steps: transition from a blue-emitting to green-emitting structure and and then a transition from a green-emitting phase to complete degradation. We found that as-synthesized CsPbBr3 nanowires (NWs) emit blue light under a 254 nm UV source. Before the degradation, first, CsPbBr3 NWs undergo a water-driven structural transition to form large bundles. It is also seen that formation of such bundles provides longer-term environmental stability. In addition theoretical calculations revealed the strength of the interaction of water molecules with ligands and surfaces of CsPbBr3 and provide an atomistic-level explanation to a transition from ligand-covered NWs to bundle formation. Further interaction of green-light-emitting bundles with water causes complete degradation of CsPbBr3 and the photoluminescence signal is entirely quenched. Moreover, Raman and x-ray-diffraction measurements revealed that completely degraded regions are decomposed to PbBr2 and CsBr precursors. We believe that the findings of this study may provide further insight into the degradation mechanism of CsPbBr3 perovskite by water.
  • Article
    Citation - WoS: 30
    Citation - Scopus: 32
    Perylene-Embedded Electrospun Ps Fibers for White Light Generation
    (Elsevier Ltd., 2019) Güner, Tuğrul; Aksoy, Erkan; Demir, Mustafa Muammer; Varlıklı, Canan
    Perylene dyes have been employed in the fabrication of white light due to their superior photophysical properties and relatively easy synthetic methods. However, their molecular aggregation in solid state is one of the main handicaps since it causes deviation in their optical properties and quenches photoluminescence quantum yields (Phi(f)). Investigation of the photophysical properties of a green (PTE), a yellow (PDI) and a new red (DiPhAPDI) emitting perylene derivative in solution, drop-casted films, polystyrene (PS) fibers and PS fibers embedded in poly (dimethyl siloxane) (PDMS) showed that PS:dye fibers prevent aggregation to some extend and allows high Of of dyes. The Of values of PTE, PDI and DiPhAPDI were all higher than 93.0% in solution and 84.8%, 94.3% and 73.6%, respectively in PS:dye fibers. Embedding the fibers in PDMS improved the photostabilities of the dyes two folds compared to their solution phases. The prepared dye containing fibers were combined together into a single PDMS film and utilized as a frequency conversion layer on a blue LED. Fabricated samples were found to show high color rendering index (>= 90), adjustable CCT (7500 K-5000 K), and power efficiency values exceeding 2001m/W depending on the used fiber amount in mass.
  • Article
    Citation - WoS: 93
    Citation - Scopus: 95
    Single-Layer Janus-Type Platinum Dichalcogenides and Their Heterostructures
    (American Chemical Society, 2019) Kahraman, Zeynep; Kandemir, Ali; Yağmurcukardeş, Mehmet; Şahin, Hasan
    Ultrathin two-dimensional Janus-type platinum dichalcogenide crystals formed by two different atoms at opposite surfaces are investigated by performing state-of-the-art density functional theory calculations. First, it is shown that single-layer PtX2 structures (where X = S, Se, or Te) crystallize into the dynamically stable IT phase and are indirect band gap semiconductors. It is also found that the substitutional chalcogen doping in all PtX2 structures is favorable via replacement of surface atoms with a smaller chalcogen atom, and such a process leads to the formation of Janus-type platinum dichalcogenides (XPtY, where X and Y stand for S, Se, or Te) which are novel single-layer crystals. While all Janus structures are indirect band gap semiconductors as their binary analogues, their Raman spectra show distinctive features that stem from the broken out-of-plane symmetry. In addition, it is revealed that the construction of Janus crystals enhances the piezoelectric constants of PtX2 crystals significantly both in the in plane and in the out-of-plane directions. Moreover, it is shown that vertically stacked van der Waals heterostructures of binary and ternary (Janus) platinum dichalcogenides offer a wide range of electronic features by forming bilayer heterojunctions of type-I, type-II, and type-III, respectively. Our findings reveal that Janus-type ultrathin platinum dichalcogenide crystals are quite promising materials for optoelectronic device applications.
  • Article
    Citation - WoS: 72
    Citation - Scopus: 77
    Gd3+-Doped Alpha-Cspbi3 Nanocrystals With Better Phase Stability and Optical Properties
    (American Chemical Society, 2019) Güvenç, Çetin Meriç; Yalçınkaya, Yenal; Özen, Sercan; Şahin, Hasan; Demir, Mustafa Muammer
    Black alpha-CsPbI3 perovskites are unable to maintain their phase stability under room conditions; hence, the alpha-CsPbI3 phase transforms into a thermodynamically stable yellow delta-CsPbI3 phase within a few days, which has a nonperovskite structure and high band gap for optoelectronic applications. This phase transformation should be prevented or at least retarded to make use of superior properties of alpha-CsPbI3 in optoelectronic applications. In this study, Gd3+ doping was employed with the aim of increasing the stability of alpha-CsPbI3. All doped alpha-CsPbI3 nanocrystals with various levels of Gd3+, between 5 and 15 mol %, have shown greater phase stability than that of the pure alpha-CsPbI3 phase from 5 days up to 11 days under ambient conditions. This prolonged phase stability can be attributed to three potential reasons: increased tolerance factor of the perovskite structure, distorted cubic symmetry, and decreased defect density in nanocrystals. Urbach energy values suggest the reduction of defect density in the doped nanocrystals. Also, use of 10 mol % Gd3+ as a dopant material increases the photoluminescence quantum yield from 70 to 80% and fluorescence lifetime of alpha-CsPbI3 from 47.4 to 64.4 ns. Further, density functional theory calculations are in a good agreement with the experimental results.