Photonics / Fotonik
Permanent URI for this collectionhttps://hdl.handle.net/11147/2590
Browse
14 results
Search Results
Article Citation - WoS: 5Citation - Scopus: 4Polarity Induced Vapochromism and Vapoluminescence of Polythiophene Derivatives for Volatile Organic Compounds Classification(Elsevier, 2023) Karabacak, Soner; Qun, David Lee Chao; Ammanath, Gopal; Yeasmin, Sanjida; Yağmurcukardeş, Mehmet; Palaniappan, Alagappan; Liedberg, Bo; Yıldız, Ümit HakanPolarity induced vapochromic and vapoluminescent properties of cationic poly-3-alkoxythiophene derivatives (PT) casted on polyvinylidene fluoride (PVDF) membranes are reported. PT with six different pendant groups are designed to differentially interact with volatile organic compounds (VOC) of varying polarities, thereby enabling their classification. PT exhibit a rapid vapochromic response with a concurrent modulation of vapoluminescence due to the non-covalent cation-? interactions between the pendant groups and the PT backbone. Adsorption of VOC on pendant groups alters the conformation of PT backbone, thus resulting in an increase in intensity and blue shifting of fluorescence emission within the visible spectrum. The vapoluminescent responses are found to be more sensitive with a limit of detection (LOD) of ?7 ppm and a wider dynamic range as compared to the vapochromic responses with a LOD of ?60 ppm for the detection of a model VOC: chloroform. Notably, all the PT illustrate an instantaneous recovery of colour and luminescence upon desorption of VOC. PT interaction with VOC of varying polarities was ascertained using density functional theory (DFT) and principal component analysis (PCA) methodologies. In summary, the polarity induced vapochromic and vapoluminescent properties of PT could yield a selective and sensitive vapochromic and fluorometric dual-mode VOC detection platform. © 2023Article Citation - WoS: 8Citation - Scopus: 9Tuning the Colour of Solution Processed Perylene Tetraester Based Oleds From Yellowish-Green To Greenish-White: a Molecular Engineering Approach(Elsevier, 2023) Aksoy, Erkan; Bozkuş, Volkan; Varlıklı, CananThree regioisomericaly pure 1,7-di-ethynyl bridged perylene-3,4,9,10-tetracarboxy tetrabutylesters functionalized with triisopropylsilyl-ethynylen (PTE1), phenyl-ethynylen (PTE2) and tetraphenylsilyl-ethynylen (PTE3) groups were synthesized. Photophysical, thermal, electrochemical, and solution processed electroluminescence (EL) behaviours were investigated in comparison with a basic perylene-3,4,9,10-tetracarboxy tetrabutylester (PTEref) structure. Stepwise π conjugation, allowed tuning the absorption and photoluminescence wavelengths of the PTEs without disturbing the photo, thermal and electrochemical stabilities; ≫10h, >250 °C, and >50 cycles, respectively. Electron mobility of PTE2 is measured to be more than 10-fold of the other PTE derivatives. Individual utilization of PTE derivatives as solid-state emitters in poly(N-vinylcarbazole) (PVK): 2-(4-Biphenylyl)-5-phenyl-1,3,4-oxadiazole (PBD) host matrix produced yellowish-green EL. Benefiting from higher electron mobiliy, PTE2 emitter presented the best device efficiency values with an EL maximum of 535 nm. Whereas dual doping of the synthesized PTEs with PTEref resulted in greenish-white light with increased stability. Although the emitting layer contained no red emitting component, optimization of the dual doping ratio of PTEref:PTE3 produced a colour rendering index value of 76 with Commission Internationale d'Eclairage coordinates of (0.29, 0.37).Article Citation - WoS: 13Citation - Scopus: 14Synthesis of Albumin Nanoparticles in a Water-Miscible Ionic Liquid System, and Their Applications for Chlorambucil Delivery To Cancer Cells(Elsevier, 2022) Akdoğan, Yaşar; Sözer, Sümeyra Çiğdem; Akyol, Cansu; Başol, Merve; Karakoyun, Çiğdem; Çakan Akdoğan, GülçinSerum albumin has been a preferred protein to generate biodegradable and non-toxic nanoparticles (NPs) for drug delivery applications. Different methods applied for the preparation of serum albumin NPs mostly used organic solvents. Here, we prepared serum albumin NPs in an ionic liquid (IL) system. ILs are considered to be green and designer solvents with unique properties that can replace organic solvents in the synthesis of albumin NPs. Bovine serum albumin (BSA) proteins dissolved in water were transformed into BSA NPs in a water/ Triton™X (TX-100), 1-butanol/1-butyl-3-methylimidazolium trifluoromethanesulfonate (BmimCF3SO3) microemulsion-like system by using a high-speed homogenizer and crosslinker glutaraldehyde. The obtained BSA NPs have been used in drug loading and release studies with a hydrophobic anticancer drug chlorambucil (Chl). Drug loading increased as increasing the ratio of Chl incubated with BSA NPs. Monitoring the drug release by UV–Vis spectroscopy revealed a burst release at first 4 h, but two-thirds of drugs stayed with NPs upon diffusion method. On the other hand, cellular uptake of Chl loaded BSA NPs caused a significant MCF7 breast cancer cell death, whereas free Chl and unloaded BSA NPs did not have a significant effect on the cell viability. Furthermore, in vivo toxicity assessment of BSA NPs obtained in the IL system was conducted in the zebrafish animal model. It showed that zebrafish body is able to eliminate BSA NPs without any toxic side effects and encapsulation of Chl into NPs reduced the toxicity of free Chl. In summary, we showed that BSA NPs with size smaller than 200 nm could be prepared in BmimCF3SO3 mediated system. They can be used for Chl loading (up to 6.9 wt%) with a sustainable release and they induce significant cell death in Chl sensitive cancer cells up to 45% in 24 h. These results indicate that BSA NPs could be prepared alternatively in IL systems and used in drug delivery studies.Article Citation - WoS: 40Citation - Scopus: 38Anisotropic and Outstanding Mechanical, Thermal Conduction, Optical, and Piezoelectric Responses in a Novel Semiconducting Bcn Monolayer Confirmed by First-Principles and Machine Learning(Elsevier, 2022) Mortazavi, Bohayra; Fazel Shojaei; Yağmurcukardeş, Mehmet; Alexander Shapeev; Xiaoying ZhuangGraphene-like nanomembranes made of the neighboring elements of boron, carbon and nitrogen elements, are well-known of showing outstanding physical properties. Herein, with the aid of density functional theory (DFT) calculations, various atomic configurations of the graphene-like BCN nanosheets are investigated. DFT results reveal that depending on the atomic arrangement, the BCN monolayers may display semimetallic Dirac cone or semiconducting electronic nature. BCN nanosheets are also found to exhibit high piezoelectricity and carrier mobilities with considerable in-plane anisotropy, depending on the atomic arrangement. For the predicted most stable BCN monolayer, thermal and mechanical properties are explored using machine learning interatomic potentials. The room temperature tensile strength and lattice thermal conductivity of the most stable BCN monolayer are estimated to be orientation-dependent and remarkably high, over 78 GPa and 290 W/m.K, respectively. In addition, the thermal expansion coefficient of the monolayer BCN at room temperature is estimated to be −3.2 × 10−6 K−1, which is close to that of the graphene. The piezoelectric response of the herein proposed BCN lattice is also predicted to be close to that of the h-BN monolayer. Presented results highlight outstanding physics of the BCN nanosheets.Article Citation - WoS: 2Citation - Scopus: 5Experimental Modeling of Antimony Sulfides-Rich Geothermal Deposits and Their Solubility in the Presence of Polymeric Antiscalants(Elsevier, 2022) Karaburun, Emre; Sözen, Yiğit; Çiftçi, Celal; Şahin, Hasan; Baba, Alper; Akbey, Ümit; Yeşilnacar, Mehmet İrfan; Erdim, Eray; Regenspurg, Simona; Demir, Mustafa MuammerAntimony (Sb)-rich geothermal deposits have been observed in many geothermal power plants worldwide. They occur as red-colored, sulfidic precipitates disturbing energy-harvesting by clogging the geothermal installations. In order to prevent the formation of this scale, information on its physicochemical features is needed. For this purpose, Sb-rich sulfide-based deposits were synthesized at controlled conditions in a pressurized glass reactor at geothermal conditions (135 °C and 3.5 bar). Various polymeric antiscalants with different functional groups, such as acrylic acid, sulphonic acid, and phosphonic acid groups were tested for their effect on Sb sulfide solubility. An additional computational study was performed to determine the binding energy of Sb and S atoms to these groups. The results suggest that sulfonic acid groups are the most affective. Therefore, it was concluded that these macromolecule containing sulfonic acid groups and poly (vinyl sulfonic acid) derivatives could potentially act as antiscalants for the formation of antimony sulfide.Article Citation - WoS: 43Citation - Scopus: 46Glucuronoxylan-Based Quince Seed Hydrogel: a Promising Scaffold for Tissue Engineering Applications(Elsevier, 2021) Güzelgülgen, Meltem; Özkendir İnanç, Dilce; Yıldız, Ümit Hakan; Arslan Yıldız, AhuNatural gums and mucilages from plant-derived polysaccharides are potential candidates for a tissue-engineering scaffold by their ability of gelation and biocompatibility. Herein, we utilized Glucuron-oxylanbased quince seed hydrogel (QSH) as a scaffold for tissue engineering applications. Optimization of QSH gelation was conducted by varying QSH and crosslinker glutaraldehyde (GTA) concentrations. Structural characterization of QSH was done by Fourier Transform Infrared Spectroscopy (MR). Furthermore, morphological and mechanical investigation of QSH was performed by Scanning Electron Microscopy (SEM) and Atomic Force Microscopy (AFM). The protein adsorption test revealed the suitability of QSH for cell attachment. Biocompatibility of QSH was confirmed by culturing NIH-3T3 mouse fibroblast cells on it. Cell viability and proliferation results revealed that optimum parameters for cell viability were 2 mg mi(-1)of QSH and 0.03 M GTA. SEM and DAPI staining results indicated the formation of spheroids with a diameter of approximately 300 pm. Furthermore, formation of extracellular matrix (ECM) microenvironment was confirmed with the Collagen Type-I staining. Here, it was demonstrated that the fabricated QSH is a promising scaffold for 3D cell culture and tissue engineering applications provided by its highly porous structure, remarkable swelling capacity and high biocompatibility. (C) 2021 Published by Elsevier B.V.Article Citation - WoS: 1Citation - Scopus: 1First-Principles Investigation of Structural, Raman and Electronic Characteristics of Single Layer Ge3n4(Elsevier, 2022) Yayak, Yankı Öncü; Sözen, Yiğit; Tan, Fırat; Güngen, Deniz; Gao, Q.; Kang, J.; Yağmurcukardeş, Mehmet; Şahin, HasanBy means of density functional theory-based first-principle calculations, the structural, vibrational and electronic properties of single-layer Ge3N4 are investigated. Structural optimizations and phonon band dispersions reveal that single-layer ultrathin form of Ge3N4 possesses a dynamically stable buckled structure with large hexagonal holes. Predicted Raman spectrum of single-layer Ge3N4 indicates that the buckled holey structure of the material exhibits distinctive vibrational features. Electronic band dispersion calculations indicate the indirect band gap semiconducting nature of single-layer Ge3N4. It is also proposed that single-layer Ge3N4 forms type-II vertical heterostructures with various planar and puckered 2D materials except for single-layer GeSe which gives rise to a type-I band alignment. Moreover, the electronic properties of single-layer Ge3N4 are investigated under applied external in-plane strain. It is shown that while the indirect gap behavior of Ge3N4 is unchanged by the applied strain, the energy band gap increases (decreases) with tensile (compressive) strain. © 2021 Elsevier B.V.Article Citation - WoS: 20Citation - Scopus: 23Kagome-Like Silicene: a Novel Exotic Form of Two-Dimensional Epitaxial Silicon(Elsevier, 2020) Sassa, Yasmine; Johansson, Fredrik O. L.; Lindblad, Andreas; Yazdi, Milad G.; Simonov, Konstantin; Weissenrieder, Jonas; Le Lay, Guy; İyikanat, Fadıl; Şahin, HasanSince the discovery of graphene, intensive efforts have been made in search of novel two-dimensional (2D) materials. Decreasing the materials dimensionality to their ultimate thinness is a promising route to unveil new physical phenomena, and potentially improve the performance of devices. Among recent 2D materials, analogs of graphene, the group IV elements have attracted much attention for their unexpected and tunable physical properties. Depending on the growth conditions and substrates, several structures of silicene, germanene, and stanene can be formed. Here, we report the synthesis of a Kagome-like lattice of silicene on aluminum (1 1 1) substrates. We provide evidence of such an exotic 2D Si allotrope through scanning tunneling microscopy (STM) observations, high-resolution core-level (CL) and angle-resolved photoelectron spectroscopy (ARPES) measurements, along with Density Functional Theory calculations.Article Citation - WoS: 28Citation - Scopus: 29Enhancing the Efficiency of Mixed Halide Mesoporous Perovskite Solar Cells by Introducing Amine Modified Graphene Oxide Buffer Layer(Elsevier, 2020) Şahin, Çiğdem; Diker, Halide; Sygkridou, Dimitra; Varlıklı, Canan; Stathatos, EliasIn this study, graphene oxide (GO) was synthesized via Tour method and then modified with two different amine sources that contained different branched alkyl chains. The GO and modified GOs (mGOs) with dihexylamine (DHA) and 2-ethylhexylamine (2EHA) as amine sources were used respectively as buffer layers in mixed halide mesoporous perovskite solar cells (PSCs) in order to examine whether they could improve their performance. GO and mGO samples were characterized by several techniques such as X-Ray Diffraction, X-Ray photoelectron spectroscopy (XPS), Raman analysis and thermal gravimetric analysis (TGA). The preparation of the CH3NH3PbI3-xClx perovskite solution was performed using standard Schlenk techniques under argon atmosphere to attain a homogeneous coverage of the perovskite film. The solar cells with the additional layer of mGO derivatives between perovskite and hole transporting layer showed an improved overall performance compared to the reference devices which was attributed to the enhanced charge carrier transport via the mGOs. In particular, 10% increase to the overall performance of the solar cells was monitored in devices where 2-ethylhexylamine (2EHA) modified GO was used, compared to standard cell without buffer layer. (C) 2019 Elsevier Ltd. All rights reserved.Article Citation - WoS: 1Interaction of Ge With Single Layer Gaas: From Ge-Island Nucleation To Formation of Novel Stable Monolayers(Elsevier, 2020) Sözen, Yiğit; Eren, İsmail; Özen, Sercan; Yağmurcukardeş, Mehmet; Şahin, HasanIn this study, reactivity of single-layer GaAs against Ge atoms is studied by means of ab initio density functional theory calculations. Firstly, it is shown that Ge atoms interact quite strongly with the GaAs layer which allows the formation of Ge islands while it hinders the growth of detached germanene monolayers. It is also predicted that adsorption of Ge atoms on GaAs single-layer lead to formation of two novel stable single-layer crystal structures, namely 1H-GaGeAs and 1H(A)-GaGeAs. Both the total energy optimizations and the calculated vibrational spectra indicate the dynamical stability of both single layer structures. Moreover, although both structures crystallize in 1H phase, 1H-GaGeAs and 1H(A)-GaGeAs exhibit distinctive vibrational features in their Raman spectra which is quite important for distinguishing the structures. In contrast to the semiconducting nature of single-layer GaAs, both polytypes of GaGeAs exhibit metallic behavior confirmed by the electronic band dispersions. Furthermore, the linear-elastic constants, in-plane stiffness and Poisson ratio, reveal the ultrasoft nature of the GaAs and GaGeAs structures and the rigidity of GaAs is found to be slightly enhanced via Ge adsorption. With their stable, ultra-thin and metallic properties, predicted single-layer GaGeAs structures can be promising candidates for nanoscale electronic and mechanical applications.