Photonics / Fotonik
Permanent URI for this collectionhttps://hdl.handle.net/11147/2590
Browse
39 results
Search Results
Article Citation - Scopus: 1A Perspective on the State-Of Functionalized 2d Materials(American Institute of Physics, 2023) Duran, Tuna; Yayak, Yankı Öncü; Aydın, Hasan; Peeters, François M.; Yağmurcukardeş, MehmetTwo-dimensional (2D) ultra-thin materials are more crucial than their bulk counterparts for the covalent functionalization of their surface owing to atomic thinness, large surface-to-volume ratio, and high reactivity of surface atoms having unoccupied orbitals. Since the surface of a 2D material is composed of atoms having unoccupied orbitals, covalent functionalization enables one to improve or precisely modify the properties of the ultra-thin materials. Chemical functionalization of 2D materials not only modifies their intrinsic properties but also makes them adapted for nanotechnology applications. Such engineered materials have been used in many different applications with their improved properties. In the present Perspective, we begin with a brief history of functionalization followed by the introduction of functionalized 2D materials. Our Perspective is composed of the following sections: the applications areas of 2D graphene and graphene oxide crystals, transition metal dichalcogenides, and in-plane anisotropic black phosphorus, all of which have been widely used in different nanotechnology applications. Finally, our Perspectives on the future directions of applications of functionalized 2D materials are given. The present Perspective sheds light on the current progress in nanotechnological applications of engineered 2D materials through surface functionalization. © 2023 Author(s).Article Citation - WoS: 5Citation - Scopus: 5Thickness-Dependent Piezoelecticity of Black Arsenic From Few-Layer To Monolayer(Elsevier, 2023) Akgenç Hanedar, Berna; Ersan, Fatih; Altalhi, Tariq; Yağmurcukardeş, Mehmet; Yakobson, BorisUltra-thin forms of black phosphorus (b-P) have been widely investigated due to its unique properties arising from the in-plane anisotropy in its crystal structure. Recently, two-dimensional (2D) forms of black arsenic (b-As) have also been added to the 2D family. In this study, the thickness-dependent structural, electronic, and piezoelectric properties of layered b-As are investigated by means of ab-initio calculations. The structural optimizations confirm the van der Waals type layered structure for both these structures. In addition, increasing the thickness is shown to result in the decreasing of the band gap arising from the confinement of electrons in the layers. In contrast to the case of b-P, it is revealed that a transition from indirect-to-direct band gap behavior can be found in b-As which can be important for optically identifying the single-layer structure. Moreover, the piezoelectric properties are investigated as a function of the number of layers. It is shown that while a single-layer of b-As does not exhibit piezoelectric features, even in the case of bilayer structures the piezoelectricity is created. Our results revealed the strong in-plane anisotropy in piezoelectric coefficients for the three-layer and thicker structures. We have shown that the out-of-plane piezoelectric properties can be achieved by non-centrosymmetric features in the out-of-plane direction in thicker structures of b-As.Article Citation - WoS: 4Citation - Scopus: 4Identification of a Magnetic Phase Via a Raman Spectrum in Single-Layer Mnse: an Ab Initio Study(Elsevier, 2022) Yayak, Yankı Öncü; Şahin, Hasan; Yağmurcukardeş, MehmetMotivated by the recent experimental realization of single-layer two-dimensional MnSe [ACS Nano2021, 15, 13794-13802], structural, magnetic, elastic, vibrational, and electronic properties of single-layer MnSe are investigated by using density functional theory-based calculations. Among four different magnetic phases, namely, ferromagnetic (FM) and Nẽel-, zigzag-, and stripy-antiferromagnetic (AFM) phases, the Nẽel-AFM structure is found to be the energetically most favorable phase. Structural optimizations show the formation of in-plane anisotropy within the structures of zigzag- and stripy-AFM phases in single-layer MnSe. For the dynamically stable four magnetic phases, predicted Raman spectra reveal that each phase exhibits distinctive vibrational features and can be distinguished from each other. In addition, the elastic constants indicate the mechanical stability of each magnetic phase in single-layer MnSe and reveal the soft nature of each phase. Moreover, electronic band dispersion calculations show the indirect band gap semiconducting nature with varying electronic band gap energies for all magnetic phases. Furthermore, the atomic orbital-based density of states reveals the existence of out-of-plane orbitals dominating the top valence states in zigzag- and stripy-AFM phases, giving rise to the localized states. The stability of different magnetic phases and their distinct vibrational and electronic properties make single-layer MnSe a promising candidate for nanoelectronic and spintronic applications.Article Citation - WoS: 13Citation - Scopus: 13A Theoretical Investigation on the Physical Properties of Zirconium Trichalcogenides, Zrs3, Zrse3 and Zrte3 Monolayers(MDPI, 2022) Mortazavi, Bohayra; Shojaei, Fazel; Yağmurcukardeş, Mehmet; Makaremi, Meysam; Zhuang, XiaoyingIn a recent advance, zirconium triselenide (ZrSe3) nanosheets with anisotropic and strain-tunable excitonic response were experimentally fabricated. Motivated by the aforementioned progress, we conduct first-principle calculations to explore the structural, dynamic, Raman response, electronic, single-layer exfoliation energies, and mechanical features of the ZrX3 (X = S, Se, Te) monolayers. Acquired phonon dispersion relations reveal the dynamical stability of the ZrX3 (X = S, Se, Te) monolayers. In order to isolate single-layer crystals from bulk counterparts, exfoliation energies of 0.32, 0.37, and 0.4 J/m2 are predicted for the isolation of ZrS3, ZrSe3, and ZrTe3 monolayers, which are comparable to those of graphene. ZrS3 and ZrSe3 monolayers are found to be indirect gap semiconductors, with HSE06 band gaps of 1.93 and 1.01 eV, whereas the ZrTe3 monolayer yields a metallic character. It is shown that the ZrX3 nanosheets are relatively strong, but with highly anisotropic mechanical responses. This work provides a useful vision concerning the critical physical properties of ZrX3 (X = S, Se, Te) nanosheets.Article Citation - WoS: 5Citation - Scopus: 4Electromagnetically Induced Transparency and Absorption Cross-Over With a Four-Level Rydberg System(IOP Publishing, 2022) Oyun, Yağız; Çakır, Özgür; Sevinçli, SevilayElectromagnetically induced transparency (EIT) and absorption (EIA) are quantum coherence phenomena which result from the interference of excitation pathways. Combining these with Rydberg atoms have opened up many possibilities for various applications. We introduce a theoretical model to study Rydberg-EIT and Rydberg-EIA effects in cold Cs and Rb atomic ensembles in a four-level ladder type scheme taking into account van der Waals type interactions between the atoms. The proposed many-body method for analysis of such systems involves a self-consistent mean field approach and it produces results which display a very good agreement with recent experiments. Our calculations also successfully demonstrate experimentally observed EIT-EIA cross-over in the Rb case. Being able to simulate the interaction effects in such systems has significant importance, especially for controlling the optical response of these.Article Citation - WoS: 3Citation - Scopus: 3Influence of Cation Size and Polarity on Charge Transport in Ionic Liquid Based Electrolytes(Wiley, 2022) Aydın, Banu; Öner, Saliha; Zafer, Ceylan; Varlıklı, CananImidazolium-based ionic liquids (ILs) with allyl and ether side chains were synthesized and characterized. Comprehensive structural and photoelectrochemical characterizations were performed, transport properties of ILs were also examined as electrolyte components in dye sensitized solar cells (DSSCs). The properties of synthesized materials and DSSC performances were compared with 1-propyl-3-methyl imidazolium iodide (PMII) and 1-allyl-3-ethyl imidazolium iodide (AEII) as reference ILs. Ionic conductivities, diffusion coefficients and charge transfer resistances of synthesized ionic liquids were investigated on DSSCs by Electrochemical Impedance Spectroscopy (EIS). The diffusion coefficient values of triiodide ions in different ionic liquid-based electrolytes were measured by the means of diffusion limited current density method and found to be 1.75×10−7 cm2 s−1 and 2.05×10−7 cm2 s−1 with corresponding photocurrent densities of 10.38 mAcm−2 and 12.13 mAcm−2 for the reference AEII and PMII based electrolytes, respectively. However, for the electrolytes of 1-(2-methoxyethyl)-3-allyl imidazolium iodide and 1-allyl-3-methyl imidazolium iodide ionic liquids, these values were found to be 0.86×10−7 cm2 s−1 and 0.57×10−7 cm2 s−1 with photocurrent densities of 9.53 mAcm−2 and 8.98 mAcm−2, respectively. Allyl and ether substituted imidazolium ILs exhibited promising results as potential alternative electrolyte materials for DSSCs.Article Citation - WoS: 4Citation - Scopus: 4A Cyclopalladated Bodipy Construct as a Fluorescent Probe for Carbon Monoxide(Wiley, 2022) Çevik Eren, Merve; Eren, Ahmet; Dartar, Suay; Tütüncü, Büşra Buse; Emrullahoğlu, MustafaBy introducing a palladium ion into the backbone of BODIPY, we devised a cyclopalladated BODIPY construct that was almost non-emissive in the absence of any analyte but became highly fluorescent upon interacting with carbon monoxide (CO) in solution and in living cells. A process of ortho-carbonylation and depalladation mediated by the specific binding of CO to palladium, promoted the release of the heavy atom from the fluorophore and consequently generated a fluorescence signal with an exceptionally high (60-fold) enhancement ratio.Article Citation - WoS: 3Citation - Scopus: 1Transition Metal Salt Promoted, Green, and High-Yield Synthesis of Silver Nanowires for Flexible Transparent Conductive Electrodes(Wiley-Blackwell, 2021) Sarısözen, Sema; Tertemiz, Necip Ayhan; Arıca, Tuğçe Aybüke; Polat, Nahit; Kocabaş, Çoşkun; Mert Balcı, Fadime; Balcı, SinanSilver nanowires (AgNWs) have attracted considerable interest from both academia and industry owing to their excellent electrical, optical, and chemical properties. For large-scale synthesis of AgNWs, the polyol method involving ethylene glycol, a toxic alcohol, has been widely used. We herein report on a facile, green, high yield, transition metal salt promoted, open atmosphere method for the synthesis of high quality AgNWs in a glycerol-water mixture. We have shown that transition metal salts have a strong influence on the morphology of AgNWs. Importantly, in the presence of copper(II) chloride, AgNWs with a high aspect ratio of around 400 (length, 36 μm; diameter, 90 nm) were obtained. Additionally, for the first time, we have demonstrated AgNWs based flexible transparent conductive electrodes (TCEs) on poly(sodium 4-styrenesulfonate) (PSS) treated polyethylene terephthalate (PET) substrate with a sheet resistance of 34 Ω/sq and transmittance of 91 % at 550 nm. The PSS layer on the PET substrate generated a highly hydrophilic surface, which boosts interaction of AgNWs with the PET surface. We envision that our results would play a significant role both in the synthesis of AgNWs with high aspect ratio and also in designing new rigid and flexible TCEs having high transmittance and low sheet resistance for applications especially in printable solar cells, organic light emitting diodes, and high performance flexible electronics.Article Citation - WoS: 16Citation - Scopus: 16Silylethynyl substitution for preventing aggregate formation in perylene diimides(American Chemical Society, 2021) Aksoy, Erkan; Danos, Andrew; Li, Chunyong; Monkman, Andrew P.; Varlıklı, CananEthynylene-bridged perylene diimides (PDIs) with different sized silane groups have been synthesized as a steric blocking group to prevent the formation of non-radiative trap sites, for example, strong H-aggregates and other dimers or excimers. Excited singlet-state exciton dynamics were investigated by time-resolved photoluminescence and ultrafast pump-probe transient absorption spectroscopy. The spectra of the excimer or dimer aggregates formed by the PDIs at high concentrations were also determined. Although the photophysical properties of the bare and shielded PDIs are identical at micromolar concentrations, more shielded PDI2 and PDI3 exhibited resistance to aggregation, retaining higher photoluminescence quantum yield even at 10 mM concentration and in neat films. The PDIs also exhibited high photostability (1 h of continuous excitation), as well as electrochemical stability (multiple cycles with cyclic voltammetry). Prevention of dimer/aggregate formation in this manner will extend the uses of PDIs to a variety of high concentration photonics and optoelectronic applications, such as organic light-emitting diodes, organic photovoltaics, and luminescent solar concentrators.Article Citation - WoS: 21Citation - Scopus: 25Surface Functionalization of the Honeycomb Structure of Zinc Antimonide (znsb) Monolayer: a First-Principles Study(Elsevier, 2021) Bafekry, A.; Shahrokhi, M.; Yağmurcukardeş, Mehmet; Gogova, D.; Ghergherehchi, M.; Akgenç, B.; Feghhi, S. A. H.Structural, electronic, optic and vibrational properties of Zinc antimonide (ZnSb) monolayers and their func-tionalized (semi-fluorinated and fully chlorinated) structures are investigated by means of the first-principles calculations. The phonon dispersion curves reveal the presence of imaginary frequencies and thus confirm the dynamical instability of ZnSb monolayer. The calculated electronic band structure corroborates the metallic character with fully-relativistic calculations. Moreover, we analyze the surface functionalization effect on the structural, vibrational, and electronic properties of the pristine ZnSb monolayer. The semi-fluorinated and fully-chlorinated ZnSb monolayers are shown to be dynamically stable in contrast to the ZnSb monolayer. At the same time, semi-fluorination and fully-chlorination of ZnSb monolayer could effectively modulate the metallic elec-tronic properties of pristine ZnSb. In addition, a magnetic metal to a nonmagnetic semiconductor transition with a band gap of 1 eV is achieved via fluorination, whereas a transition to a semiconducting state with 1.4 eV band gap is found via chlorination of the ZnSb monolayer. According to the optical properties analysis, the first ab-sorption peaks of the fluorinated-and chlorinated-ZnSb monolayers along the in-plane polarization are placed in the infrared range of spectrum, while they are in the middle ultraviolet for the out-of-plane polarization. Interestingly, the optically anisotropic behavior of these novel monolayers along the in-plane polarizations is highly desirable for design of polarization-sensitive photodetectors. The results of the calculations clearly proved that the tunable electronic properties of the ZnSb monolayer can be realized by chemical functionalization for application in the next generation nanoelectronic devices.