Distorted Physical Model To Study Sudden Partial Dam Break Flows in an Urban Area

Loading...

Date

Authors

Tayfur, Gökmen
Elçi, Şebnem

Journal Title

Journal ISSN

Volume Title

Open Access Color

BRONZE

Green Open Access

Yes

OpenAIRE Downloads

OpenAIRE Views

Publicly Funded

No
Impulse
Top 10%
Influence
Top 10%
Popularity
Top 10%

relationships.isProjectOf

relationships.isJournalIssueOf

Abstract

A distorted physical model, based on Ürkmez Dam in Izmir, Turkey, was built to study sudden partial dam break flows. The distorted model had a horizontal scale of 1/150 and a vertical scale of 1/30, containing dam reservoir, dam body, and downstream area-from dam body to Ürkmez urban area until the sea coast. In the model, the reservoir is approximately 12 m3, the dam body has a width of 2.84 m and a height of 1.07 m, and the downstream area is nearly 200 m2. The Ürkmez Dam was chosen because Ürkmez Town is located right at its downstream area, allowing the study of dam break flows in an urban area. Furthermore, the dimensions were suitable such that it allowed the construction of a physical model (dam reservoir, dam body, and downstream area) having a horizontal scale of 1/150 in the available space of 300 m2. The features creating roughness such as buildings, bridge, and roads were also reflected in the physical model. The dam break flow was investigated for sudden partial collapse, which was simulated by a trapezoidal breach on the dam body. The water depths at downstream area were measured at eight different locations by using e+ WATER L (level) sensors. The velocities were measured at four different locations by ultrasonic velocity profiler (UVP) transducers. The propagation of the flood was recorded by a high-defnition camera. The experimental results show that the Ürkmez area can be flooded in a matter of minutes, at depths reaching up to 3 m in residential areas in 4 min. The flood wave front can reach the residential areas in 2 min and to the sea coast in 4 min. Flow velocities can reach 70.9 km/h in sparse residential areas, close to dam body. Away from the dam body in the sparse buildings part of the town, the velocities can reach 27.7 km/h. In dense residential areas of the town, the velocities are too low (2.8 km/h) but flow depths can reach 3 m. Velocity profiles show similar behavior like unsteady and nonuniform open channel flow in nonresidential areas close to the dam body. In residential areas away from the dam body, the velocity profiles are more uniform, having lower velocity values. Vertical variations of velocities show markedly different behavior during rising and recession stages. The profiles are smooth during the rising stage in sparse residential area, yet it shows fluctuating behavior during the recession stage.

Description

Keywords

Dam break flows, Distorted physical model, Flood propagation, Flow depths, Sudden partial collapse, Velocity profiles, Dam break flows, Sudden partial collapse, Distorted physical model, Flood propagation, Flow depths, Velocity profiles

Fields of Science

0208 environmental biotechnology, 0207 environmental engineering, 02 engineering and technology

Citation

Güney, M.S., Tayfur, G., Bombar, G., and Elçi, Ş. (2014). Distorted physical model to study sudden partial dam break flows in an urban area. Journal of Hydraulic Engineering, 140(11). doi:10.1061/(ASCE)HY.1943-7900.0000926

WoS Q

Scopus Q

OpenCitations Logo
OpenCitations Citation Count
41

Volume

140

Issue

11

Start Page

End Page

PlumX Metrics
Citations

CrossRef : 23

Scopus : 53

Captures

Mendeley Readers : 62

Google Scholar Logo
Google Scholar™
OpenAlex Logo
OpenAlex FWCI
2.7465886

Sustainable Development Goals