Physics / Fizik
Permanent URI for this collectionhttps://hdl.handle.net/11147/6
Browse
11 results
Search Results
Article Citation - WoS: 9Citation - Scopus: 9High Voltage Response of Graphene/4h-sic Uv Photodetector With Low Level Detection(Elsevier, 2023) Jehad, Ala K.; Ünverdi, Özhan; Çelebi, CemA self-powered graphene/silicon carbide (G/4H-SiC) ultraviolet photodetector of a p-i-n like-structure with high voltage response has been fabricated to detect and measure low intensity ultraviolet (UV) radiation. Bilayer graphene sheet grown by chemical vapor deposition (CVD) method was transferred on the top of an epilayer structure of n-/n+ 4 H-SiC. In this structure, two Schottky contacts were formed: one at G/ n- 4H-SiC interface and the other at bulk-4 H-SiC/Cr/Au interface. The photodetector's characteristic measurements revealed low dark current of - 0.58 nA and spectral voltage responsivity of - 0.75 V/W at 300 nm wavelength. Under low level UV illumination of 300 nm wavelength, the photodetector exhibited a leakage current and a photogenerated response voltage of 1.1 nA and 10 mV, respectively. The time-dependent photovoltage measurements displayed a rapid photovoltage response with rise and decay times of -74 ns and - 580 ns, respectively. This novel device holds promise for applications requiring sensitive and self-powered UV detection.Article Citation - WoS: 35Citation - Scopus: 35Cvd Graphene/Sic Uv Photodetector With Enhanced Spectral Responsivity and Response Speed(Elsevier, 2023) Jehad, Ala K.; Fidan, Mehmet; Ünverdi, Özhan; Çelebi, CemA self-powered, high-performance graphene/Silicon Carbide (G/4H-SiC) ultraviolet Schottky junction photodetector has been fabricated, and the effect of using monolayer and bilayer graphene on the device performance parameters was investigated. P-type graphene sheets were grown by the chemical vapor deposition (CVD) method, while 4H-SiC material consists of an epilayer structure of n-/n+ on bulk n-SiC. Two photodetector devices have been studied, one with monolayer graphene (MLG) and the other with bilayer graphene (BLG). The proposed photodetector structure reveals the highest spectral responsivity known of a G/4H-SiC UV photodetector so far. Electronic and optoelectronic characterizations were done under an ultraviolet wavelength range from 240 to 350 nm. The results show two spectral responsivity maxima (Rmax) at 285 nm and 300 nm wavelengths. Exhibiting two maxima in spectral responsivity and detectivity is caused by the constructive and destructive interference effects of multiple reflections at the SiC epilayer's interfaces. The photodetector devices exhibit high spectral responsivity (R ? 0.09 AW?1), maximum detectivity (D* ? 2.9 × 1012 Jones), and minimum noise equivalent power (NEP ? 0.17 pWHz-1/2) in both devices. Using bilayer graphene instead of monolayer showed no significant change in both the photogenerated current and the spectral responsivity due to the higher absorption coefficient of bilayer graphene, however, it exhibited a significant improvement in the response speed. The response speed was found to increase by 50 % when bilayer graphene was used as a hole collecting electrode in the G/4H-SiC junction. This is because bilayer graphene creates a narrower depletion layer and higher electric field, which promotes efficient charge separation and recombination. © 2023 Elsevier B.V.Article Citation - WoS: 22Citation - Scopus: 26Flexible Metal/Semiconductor Type Photodetectors Based on Manganese Doped Zno Nanorods(Elsevier, 2023) Karagöz, Emine; Altaf, Çiğdem Tuç; Yaman, Ecenaz; Yıldırım, İpek Deniz; Erdem, Emre; Çelebi, Cem; Fidan, Mehmet; Sankir, Mehmet; Demirci Sankir, NurdanHigh-performance flexible photodetectors are one of the most interesting research areas due to their great possibilities for a variety of applications such as portable and wearable optoelectronics. This study verifies the performance of flexible metal/semiconductor/metal-type photodetector based on pristine and manganese doped ZnO nanorods (ZnO-NRs) prepared in two different concentrations of zinc precursors and manganese dopant at low temperatures. The photodetectors having ZnO-NRs with high aspect ratios were investigated by various material characterization techniques such as electron paramagnetic resonance and photoluminescence spectroscopy to confirm the relationship between defect concentrations and photodetector performance parameters. It has been calculated that the detectivity (D*) and responsivity (R) of the ZnO nanorod-based photodetectors increased 20 and 18 folds, respectively by increasing the concentration of zinc precursor. Besides the D* and R values of the photodetectors, prepared by the 16.5 mM zinc precursor, increased 18 and 4.5-fold, respectively, after manganese doping. We confirmed that even a very low concentration of zinc precursor could produce a photodetector with high performance in photo-response characteristics, flexibility, and stability against 10,000 cycles of convex/concave bending.(c) 2023 Elsevier B.V. All rights reserved.Article Citation - WoS: 5Citation - Scopus: 5Self-Powered Photodetector Array Based on Individual Graphene Electrode and Silicon-On Integration(Elsevier, 2023) Yanılmaz, Alper; Ünverdi, Özhan; Çelebi, CemOne of the key limitations for the device performance of the silicon (Si) based photodetector arrays is the optical crosstalk effect encountered between photoactive elements as well. The scope of this work is to reduce optical crosstalk and thus increasing the device performances with graphene and Si integration. This paper presents the design, fabrication process, and performance evaluation of self-powered individual Graphene/Silicon on Insulator (GSOI) based Schottky barrier photodiode array (PDA) devices. A 4-element GSOI Schottky barrier PDA with separate graphene electrodes is fabricated to examine possible optical crosstalk encountered between each diode in the array structure. Here, monolayer graphene is utilized as hole collecting separate electrode on individually arrayed n-type Si on SOI substrate by photolithography technique. Each diode in the array exhibited a clear rectifying Schottky character. Photoresponse characterizations revealed that all diodes had excellent device performance even in self-powered mode in terms of an Ilight/Idark ratio up to 104, a responsivity of ∼0.12 A/W, a specific detectivity of around 1.6 × 1012 Jones, and a response speed of ∼1.32 μs at 660 nm wavelength. As revealed by optical crosstalk measurement, the device with pixel pitch of 1.5 mm had a total crosstalk of about 0.10% (−60 dB) per array. These results showed that the optical crosstalk between neighboring n-Si elements can be greatly minimized when graphene is used as separated electrode on arrayed Si on SOI substrate. Our study is expected give an insight into the performance characteristics of GSOI PDA devices which have great potential to be used in many technological applications such as multi-wavelength light measurement, level metering, high-speed photometry and position/motion detection. © 2023 Elsevier B.V.Article Citation - WoS: 4Citation - Scopus: 4Light-Induced Modification of the Schottky Barrier Height in Graphene/Si Based Near-Infrared Photodiodes(Elsevier, 2022) Fidan, Mehmet; Dönmez, Gülçin; Yanılmaz, Alper; Ünverdi, Özhan; Çelebi, CemThe impact of light on the Schottky barrier height (SBH) in p-type graphene/n-type Si (p-Gr/n-Si) based near-infrared photodiodes is investigated. Hall effect and optoelectronic transport measurements carried out under illumination of 905 nm wavelength light showed that zero-bias SBH in such photodiodes can be effectively tuned in a range between 0.7 and 0.9 eV consistent with the variation in their open-circuit voltage. Shockley-Read-Hall model, which considers the charge recombination through mid-gap and interface states at the p-Gr/n-Si heterojunction, is used to explain the experimentally observed nonlinear dependence of SBH on the incident light. Light induced tunability of SBH at the graphene/semiconductor heterojunction is of great importance especially for the development of new generation optically driven devices in which graphene acts as a functioning element.Article Citation - WoS: 12Citation - Scopus: 17Junction Area Dependent Performance of Graphene/Silicon Based Self-Powered Schottky Photodiodes(Elsevier, 2021) Fidan, Mehmet; Ünverdi, Özhan; Çelebi, CemThis work reports the impact of junction area on the device performance parameters of Graphene/n-Silicon (Gr/n-Si) based Schottky photodiodes. Herein, three batches of Gr/n-Si photodiode samples were produced based on various sized CVD grown monolayer graphene layers transferred on individual n-Si substrates. The fabricated devices exhibited strong Schottky diode character and had high spectral sensi-tivity at 905 nm peak wavelength. The optoelectronic measurements showed that the spectral response of Gr/n-Si Schottky photodiodes has a linear dependence on the active junction area. The sample with 20 mm(2) junction area reached a spectral response of 0.76 AW(-1), which is the highest value reported in the literature for self-powered Gr/n-Si Schottky photodiodes without the modification of graphene electrode. In contrast to their spectral responsivities, the response speed of the samples were found to be lowered as a function of the junction area. The experimental results demonstrated that the device performance of Gr/n-Si Schottky photodiodes can be modified simply by changing the size of the graphene electrode on n-Si without need of external doping of graphene layer or engineering Gr/n-Si interface. This study may serve towards the standardization of junction area for the development of high performance Gr/Si based optoelectronic devices such as solar cells and photodetectors operating in between the ultraviolet and near-infrared spectral region. (C) 2021 Elsevier B.V. All rights reserved.Article Citation - WoS: 10Citation - Scopus: 10The Comparison of Transient Photocurrent Spectroscopy Measurements of Pulsed Electron Deposited Zno Thin Film for Air and Vacuum Ambient Conditions(Elsevier, 2019) Özdoğan, Mehmet; Yiğen, Serap; Çelebi, Cem; Utlu, GökhanPhotoconduction mechanism of ZnO thin films that produced by Pulsed Electron Deposition method is systematically investigated by taking Transient Photocurrent Spectroscopy measurements for different atmospheres including high vacuum and air environments. Response and recovery rates of photocurrent in the air are faster than the rates in high vacuum condition. The results in the presented work clearly indicate that the photoconduction of ZnO thin films with high surface-area-to-volume ratio are surface-related and mostly governed by adsorption/desorption of oxygen and water molecules in the atmosphere. Therefore, the high surface interaction tendency of ZnO surface with the atmosphere inevitably leads to charge transfer from surface to adsorbates and/or vice versa.Article Citation - WoS: 50Citation - Scopus: 52Monitoring the Characteristic Properties of Ga-Doped Zno by Raman Spectroscopy and Atomic Scale Calculations(Elsevier, 2019) Horzum, Şeyda; İyikanat, Fadıl; Senger, Ramazan Tuğrul; Çelebi, Cem; Sbeta, Mohamed; Yıldız, Abdullah; Serin, TülayWe experimentally and theoretically study how the structural and vibrational properties of zinc oxide (ZnO) are modified upon Gallium (Ga) doping. The characteristics of Ga-doped ZnO thin films which are synthesized by sol-gel spin coating method on glass substrates are monitored by using X-ray diffraction (XRD) and Raman scattering measurements. For atomic-level understanding of the experimental findings state-of-the-art density functional theory (DFT) based calculations are also performed. DFT calculations reveal that both the substitution and adsorption of Ga atoms in ZnO are energetically possible and substitutional doping in ZnO is the most favourable scenario. XRD measurements show that all the films are in wurtzite structure and the crystallite size of the films decreases with increasing Ga doping. In addition, Raman analysis show that strong vibrational modes at about 100 and 441 cm(-1) are associated with E-2(low) and E-2(high) phonon branches of ZnO, respectively. While the frequency of the E-2(low) mode downshifts with increasing Ga concentration, the E-2(high) phonon mode is not affected by the Ga doping. Furthermore, E-Ga phonon branch, stemming from the substituted Ga atoms, emerges at low frequencies. It is also seen that the Raman intensity of the E-G(a) peak linearly increases with increasing Ga concentration. Experimental results on the vibrational properties are in good agreement with the ab initio phonon calculations. (C) 2018 Elsevier B.V. All rights reserved.Article Citation - WoS: 22Citation - Scopus: 27Mechanisms Behind Slow Photoresponse Character of Pulsed Electron Deposited Zno Thin Films(Elsevier, 2020) Özdoğan, Mehmet; Çelebi, Cem; Utlu, GökhanSemiconducting Zinc Oxide (ZnO) is ideal candidate for ultraviolet (UV) photodetector due to its promising optoelectronic properties. Photoconductive type ZnO photodetectors, which is fabricated in metal-semiconductor-metal configuration, show mostly very high photoconductivity under UV light, but they are plagued by slow photoresponse time as slow as several tens of hours, even more. Most of the studies claimed that atmospheric adsorbates such as water and oxygen create charge traps states on the surface and remarkably increase both the photoconductivity and response time. There are also limited studies, which claim that the defect states acting as hole trap centers prolong response time significantly. However, the underlying physical mechanism is still unclear. Here we study the effects of both adsorbates and defect-related states on the photoresponse character of Pulsed Electron Deposited ZnO thin films. In order to distinguish between these two mechanisms, we have compared the time-dependent photoresponse measurements of bare-ZnO and SiO2 encapsulated-ZnO thin film samples taken under UV light and high vacuum. We show that the dominant mechanism of photoresponse in ZnO is the adsorption/desorption of oxygen and water molecules even when the measurement is performed in high vacuum. After the encapsulation of sample surface by a thin SiO2 layer, the adsorption/desorption rates can significantly improve, and the effects of these molecules partially removed.Article Citation - WoS: 24Citation - Scopus: 25Performance Enhancement of Inverted Perovskite Solar Cells Through Interface Engineering by Tpd Based Bidentate Self-Assembled Monolayers(Elsevier, 2020) Arkan, Emre; Arkan, M. Zeliha Yiğit; Ünal, Muhittin; Yalçın, Eyüp; Aydın, Hasan; Çelebi, Cem; Demic, ŞerafettinPerovskite solar cells (PSCs) have recently appeared as a promising photovoltaic technology and attracted great interest in both photovoltaic industry and academic community. Numerous active researches related to the material processing and operational aspects of device fabrication are under progress since PSCs have a great potential for attaining higher performance compared to that of other solar cell technologies. In particular, interfacial engineering is a crucial issue for obtaining high efficiency in solar cells where perovskite absorber layer is deposited between hole and electron transport layers. In inverted type architecture, PEDOT:PSS is used as both hole transport layer and surface modifier; but unfortunately, this material bears instability due to its acidic nature. Thus, self-assembled monolayers (SAMs) not only are considered as suitable alternative, but also their application is regarded as an efficient and cost effective method to modify electrode surface since it provides a robust and stable surface coverage. In this context, we have employed two novel N,N'-bis(3-methylphenyl)-N,N'-diphenylbenzidine (TPD) based SAM molecules to customize indium tin oxide (ITO) surface in inverted type PSCs. Furthermore, fine-tuning of spacer groups enables us to study device performance depending on molecular structure. This study proposes promising materials for anode interface engineering and provides a feasible approach for production of organic semiconductor based SAMs to achieve high performance PSCs.