Environmental Engineering / Çevre Mühendisliği

Permanent URI for this collectionhttps://hdl.handle.net/11147/4321

Browse

Filters

2021 - 20223

Settings

Access Right: Embargoed AccessSubject: search.filters.subject.Boron removal

Search Results

Now showing 1 - 3 of 3
  • Article
    Citation - WoS: 7
    Citation - Scopus: 9
    3d Electrode Use in Mdc for Enhanced Removal of Boron From Geothermal Water
    (Elsevier, 2022) Gören, Ayşegül Yağmur; Ökten, Hatice Eser
    Microbial desalination cell (MDC) is a significantly promising technology due to its simultaneous features of electricity production, wastewater treatment and desalination. In this paper, the three-dimensional (3D) sponge with activated carbon-chitosan (AC-CS) was synthesized to enhance the efficiency of the MDC system. Effects of operating parameters (boron concentration, electrode surface area, catholyte solution, and activated sludge volume) on MDC performance were also investigated. The MDC with 3D AC-CS anode provided a higher power density of 970 mW/m2, boron removal efficiency of 75.9%, and COD removal efficiency of >90% under optimized conditions. The maximum boron and COD removal efficiencies were 65.6 and 81.4% with the power density of 866.9 mW/m2 for geothermal brine. Moreover, BET analysis showed that the 3D AC-CS anode presented high surface area (230 m2/g) and pore volume (0.202 cm3/g). As an overall result, not only the production of 3D sponge anode electrodes with AC-CS composite was achieved but also desalination and power generation results that were comparable with the literature were presented.
  • Article
    Citation - WoS: 32
    Citation - Scopus: 36
    A Review of Boron Removal From Aqueous Solution Using Carbon-Based Materials: an Assessment of Health Risks
    (Elsevier, 2022) Gören, Ayşegül Yağmur; Recepoğlu, Yaşar Kemal; Karagündüz, Ahmet; Khataee, Alireza; Yoon, Yeojoon
    Carbon-based compounds have gained attention of researchers for use in boron removal due to their properties, which make them a viable and low cost adsorbent with a high availability, as well as environmental friendliness and high removal efficiency. The removal of boron utilizing carbon-based materials, including activated carbon (AC), graphene oxide (GO), and carbon nanotubes (CNTs), is extensively reviewed in this paper. The effects of the operating conditions, kinetics, isotherm models, and removal methods are also elaborated. The impact of the modification of the lifetime of carbon-based materials has also been explored. Compared to unmodified carbon based materials, modified materials have a significantly higher boron adsorption capability. It has been observed that adding various elements to carbon-based materials improves their surface area, functional groups, and pore volume. Tartaric acid, one of these doped elements, has been employed to successfully improve the boron removal and adsorption capabilities of materials. An assessment of the health risk posed to humans by boron in treated water utilizing carbon-based materials was performed to better understand the performance of materials in real-world applications. Furthermore, the boron removal effectiveness of carbon-based materials was evalu ated, as well as any shortcomings, future perspectives, and gaps in the literature.
  • Article
    Citation - WoS: 15
    Citation - Scopus: 18
    Simultaneous Energy Production, Boron and Cod Removal Using a Novel Microbial Desalination Cell
    (Elsevier, 2021) Gören, Ayşegül Yağmur; Ökten, Hatice Eser
    This paper investigates simultaneous boron removal from aqueous solutions, organic matter removal from industrial wastewater and energy production using a Microbial Desalination Cell (MDC). Anode chamber of the conventional MDC cell was modified to include 3D cubic electrodes as a novel design. Effects of operating parameters, including electrode type (3D-electrode and 2D-electrode), anolyte solution temperature (20 °C, 40 °C, and 60 °C), and activated sludge:wastewater volumetric ratio (S:WW = 1:1, 1:2, and 1:5), on MDC performance were studied. Furthermore, real geothermal water treatment was investigated under optimum operating conditions. Boron and organic matter removal efficiencies and the produced power density results were promising for 3D-electrodes under optimum operating conditions. The maximum boron removal efficiency, COD removal efficiency, and power density were 55.5%, 91.5%, and 9.04 mW/m3 treating real geothermal water at optimum operating conditions. The analyses of Scanning Electron Microscope with Energy Dispersive X-ray spectrometer (SEM-EDX) demonstrated biofilm formation and salt deposition on membrane surfaces, which most probably reduced the performance of MDC. Consequently, our results showed that use of 3D-electrodes was a promising improvement to the conventional configurations with 2-D electrodes since removal efficiencies and energy production were comparable for a more compact electrode structure.