Environmental Engineering / Çevre Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/4321
Browse
7 results
Search Results
Article Occurrence of Bromide and Bromate in Chlorinated Indoor Swimming Pools, And Associated Health Risks(Yildiz Technical University, 2023) Dumanoğlu, Y.; Genisoglu, M.; Sofuoglu, S.C.Swimming is a physical activity that is accessible to people of all ages in all seasons. However, continuous organic and inorganic precursor load and disinfectant dosing make pool water chemistry much more complex than other disinfected waters. Carcinogenic bromate compound is one of the hundreds of disinfection by-products in pool water. The occurrence of bromate in pool waters depends on the precursor content of filling water, the disinfection process, operating parameters, and the purity of disinfectants. While the average filling water bromide concentrations of University Campus indoor swimming pool in Gülbahçe –Urla (SP1) and Buca public indoor swimming pool (SP2) were determined to be 182 μg/L and 11.0 μg/L, respectively, the average bromate concentrations of SP1 and SP2 were 59.4 μg/L and 68.3 μg/L. Estimated chronic-toxic health risks of accidental ingestion of pool water during swimming (between 10-3 and 10-1) were lower than the threshold level (‘1’). Although the carcinogenic risks in central tendency scenario (<10-6) indicate negligible risks for swimmers, worst case scenario indicates carcinogenic risks (medians were ranged from 1.61×10-6 to 9.42×10-6) for highly exposed specific swimmer groups. Bromate accumulation in swimming pools needs attention for mitigating the health risks for swimmers. © 2021, Yıldız Technical University.Book Part Arsenic Removal by Electrocoagulation(Wiley, 2022) Gören, Ayşegül Yağmur; Kobya, MehmetBecause of the toxic impacts on human health, the arsenic (As) limit value in drinking water was decreased from 50 to 10 ?g l-1 by the relevant authorities (WHO 1993; US EPA 2001). In this case, the problem of As pollution in natural water resources used for drinking water has grown even more and turned into a global crisis. According to reports in many parts of the world, over about 230 million people appear to be affected by high arsenic concentrations in groundwater. In this case, it turned out that there was a great need for cost-effective and environmentally friendly technologies from drinking water sources. One of the emerging water treatment technologies in recent years is electrocoagulation (EC) and it has been seen that it is effective in treating As (>99%) from water and eliminates some of the disadvantages of other conventional treatment processes. EC method includes electro-oxidation of anode electrode materials (iron and aluminum) and in situ production of coagulant agents. From groundwater resources with As content of 5-1000 ?g l-1, As removal efficiencies and operating costs (OCS) of EC technology using iron (Fe) and aluminum (Al) anodes were 85.0-99.9% and 0.0020-1.04 US$ m-3, respectively. Different types (plate, scrap, rod, and ball) of electrodes were used for As removal with the EC process, and it was observed that Fe electrodes or Fe-Al hybrid electrodes performed better in As removal. In addition, it has been determined that arsenate (As(V)) removal is more effective than arsenite (As(III)). A significant quantity of As(III) is oxidized in the EC process, resulting in precipitation, adsorption, and metal-oxy hydroxylic complex reactions. EC process has a lower OC to achieve As removal below the permissible WHO value compared to conventional treatment processes, accomplishing it as a further applicable option for As removal. © 2023 John Wiley & Sons, Inc.Book Part Citation - Scopus: 3Biogas Production From Aquatic Biomass(Elsevier, 2022) Wieczorek, Nils; Kosheleva, Arina; Kuchta, Kerstin; Önen Çınar, Senem; Küçüker, Mehmet AliThe use of aquatic biomass such as algae, macrophytes, or submerged macrophytes as raw material for biogas production has numerous technical and biological advantages. In addition, synergy effects can be exploited taking into account the implementation of biogas systems in urban areas, and coupling between the production of aquatic biomass, biogas production, and urban material flows can be established. Aquatic biomass, which can be the residue of downstream processes or collected from water bodies in cities, represents an excellent opportunity for both material and energy needs. Anaerobic digestion is a widely implemented technology that is already proven for the treatment of various biomasses. Several studies showed that aquatic biomass is a valuable substrate with its high methane yield, especially codigestion processes. This chapter represents the main idea of the anaerobic digestion process while focusing on the features of the aquatic biomass applications in this process.Book Part Impacts of Remediation of Halogenated Organic Compounds in Soils and Sediments(IGI Global, 2022) Demirtepe, HaleHalogenated hydrophobic organic compounds (HOCs) have been used in various industrial applications and are present in many commercial products. Due to their emissions during manufacturing and discharges as wastes, halogenated HOCs such as polychlorinated biphenyls and polybrominated diphenyl ethers are ubiquitously found in the environment and create contaminated sites. To remove the contamination from these sites, various remediation techniques have been useful. The purpose of this chapter is to investigate the impacts of traditional and emerging remediation techniques on ecosystem. One of the traditional remediation techniques is dredging and the mostly studied emerging remediation techniques are bioaugmentation and biostimulation. The efficiency of these techniques is also evaluated regarding reduction in contaminant mass. Overall, this chapter presents the efficiency and possible impacts of dredging, bioaugmentation and biostimulation of soils and sediments, and the implications include the evaluation of most feasible remediation techniques by using life cycle assessment.Book Part Citation - Scopus: 32Language of Response Surface Methodology as an Experimental Strategy for Electrochemical Wastewater Treatment Process Optimization(Elsevier, 2022) Gören, Ayşegül Yağmur; Recepoğlu, Yaşar Kemal; Khataee, AlirezaThe availability and accessibility to safe and secure water resources are the key technological and scientific concerns of global significance. As a result of water scarcity worldwide, wastewater treatment and reuse are considered viable options to replace freshwater resources in agricultural irrigation and domestic and industrial purposes. A significant need for clean water has promoted the invention and/or enhancement of several electrochemical wastewater treatment (EWT) processes. Optimization of the process variables plays a crucial role in wastewater treatment to enhance technology performance, considering removal efficiency, operating cost, and environmental impacts. These processes are fundamentally complex multivariable, and the optimization through conventional methods is unreliable, inflexible, and time- and material-consuming. In this perspective, response surface methodology (RSM) appears to be a beneficial statistical experimental strategy for the performance optimization of the EWT process. This model could be utilized for the optimization and analysis of the individual and/or combined effects of operational variables on the treatment process to improve the system performance. Furthermore, this model provides a number of information from a slight number of experimental trials. In this chapter, a summary and a discussion are presented on the RSM model used in the electrochemical wastewater treatment processes to overcome process crucial challenges toward the optimization and modeling of process parameters. It provides a potential model to enhance the various types of wastewater treatment process performance with effective optimization. Overall, it is described that the RSM model can be used in EWT processes to find the optimum conditions.Article Citation - WoS: 9Citation - Scopus: 9How Does Arsenic Speciation (arsenite and Arsenate) in Groundwater Affect the Performance of an Aerated Electrocoagulation Reactor and Human Health Risk?(Elsevier, 2022) Gören, Ayşegül Yağmur; Kobya, Mehmet; Khataee, AlirezaArsenic (As) occurrence in water resources has become one of the most critical environmental problems worldwide. The detrimental health impacts on humans have been reported due to the consumption of As-contaminated groundwater resources. Consumption of As-containing water over the long term can cause arsenicosis and chronic effects on human health due to its toxicity. Several treatment processes are available for As removals such as coagulation, ion exchange, adsorption, and membrane technologies but they have various major drawbacks. In the present work, therefore, an aerated electrocoagulation (EC) system with aluminum anodes was operated for simultaneous arsenate (As(V)) and arsenite (As(III)) removal to overcome the disadvantages of other processes such as, sludge formation, difficulties in operation, high operating costs, high energy consumption, and the requirement of pre-treatment process and to enhance the conventional EC process. The combined effects of the applied current (0.075–0.3 A), aeration rate (0–6 L/min), pH (6.5–8.5), and As speciation (As(V)-As(III)) were studied on As removal efficiency. The findings revealed that As removal mostly depended on the airflow rate and the applied current in the EC system. The highest As removal efficiency (99.1%) was obtained at an airflow rate of 6 L/min, a pH of 6.5, an initial As (V) concentration of 200 μg/L, and a current of 0.3 A, with an energy consumption of 2.85 kWh/m3 and an operating cost of 0.66 $/m3. The human health risk assessment of treated water was also examined to understand the performance of the EC system. At most of the experimental runs, the chronic toxic risk (CTR) and carcinogenic risk (CR) of As were within the permissible limits except for an airflow rate of 0–2 L/min, an initial pH of 8.5, and a current of 0.075–0.15 A for high initial As (III) concentrations. Overall, the As removal performance and groundwater risk assessment show that the EC process is a promising option for industrial applications.Article Citation - Scopus: 5Effect of Covid-19 Pandemic on Ambient Air Quality and Excess Risk of Particulate Matter in Turkey(2021) Gören, Ayşegül Yağmur; Genişoğlu, Mesut; Ökten, Hatice Eser; Sofuoğlu, Sait CemilThe COVID-19 pandemic, which has reached 4 million global cases as of March 10, 2020, has become a worldwide problem. Turkey is one of the most affected (9th in the world) country with 139 771 cases. An intermittent curfew policy that differ for three age groups, and an intercity travel ban varying within the country have been implemented. The effects of changes in social life and industrial activity in terms of environmental pollution are not yet known. The short-term effects on PM2.5, PM10, SO2, NO2, NO, NOx, O3 and CO concentrations measured at 51 air quality measurement stations (AQMS) in 11 cities in March – April period of 2020 were statistically compared with that of the previous year. While PM2.5 (9/14 AQMS) and PM10 (29/35 AQMS) concentrations were not significantly affected, NO (12/24 AQMS), NO2 (20/29 AQMS), NOX (17/25 AQMS) concentrations were decreased, SO2 concentrations at half of the AQMSs (11/25) did not show a significant change. There were stations at which higher pollutant concentrations were measured in the study period in 2020 compared to that of 2019. Excess risks associated with PM2.5 and PM10 were estimated to be variable, albeit with a small difference. In conclusion, the heterogeneous actions taken in response to the COVID-19 pandemic resulted in mixed effects on ambient air quality.