Conservation and Restoration of Cultural Heritage / Kültür Varlıklarını Koruma ve Onarım
Permanent URI for this collectionhttps://hdl.handle.net/11147/23
Browse
22 results
Search Results
Article Citation - WoS: 8Citation - Scopus: 10Interior Plastering of Ottoman Bath Buildings(Elsevier Ltd., 2019) İpekci, Emre; Uğurlu Sağın, Elif; Böke, HasanOttoman baths were peculiar buildings with their function in community life, architectural characteristics and material use. Their interior spaces were exposed to high humidity and temperatures that made the building structure vulnerable to physical, chemical, physicochemical and biological degradations. Plasters used on the interior wall surfaces were the most important agents to protect the structure from deterioration and provide durability. This study aims to exhibit the plaster characteristics of Çinili Bath in İstanbul which was an outstanding example of Ottoman baths and built by Great Architect Sinan. Basic physical properties, raw material compositions, mineralogical, microstructural and hydraulic properties of original brick-lime plasters called as horasan (khorasan) plasters used on the walls were determined by XRF, XRD, SEM-EDS and TGA. Multilayered plaster application together with the use of glazed tiles were observed on the wall surfaces of all interior spaces. The plasters were produced from pure lime and pozzolanic crushed brick or tile aggregates and hydraulic because of the pozzolanic properties of aggregates. They are stiff, compact and durable in hot and humid conditions of bath buildings due to their self-healing properties and the formation of calcium silicate hydrates and calcium aluminate hydrates at the lime-brick interfaces and in the pores of the pozzolanic brick aggregates by the reaction of lime. Characteristics of brick aggregates were compared with the construction bricks used in the building. Their chemical and mineralogical compositions revealed that the aggregates had not been produced from construction bricks. All the results indicated that brick-lime plasters were the most suitable materials for bath buildings to protect the structure from the effect of water. © 2019 The AuthorsArticle Citation - WoS: 19Citation - Scopus: 20Execution Technique and Pigment Characteristics of Byzantine Wall Paintings of Anaia Church in Western Anatolia(Elsevier Ltd., 2018) Demir, Serap; Şerifaki, Kerem; Böke, HasanIn this study, material characteristics of wall paintings executed in 11th Century Byzantine Church located in archaeological site of Anaia (Turkey) were investigated to provide historical information of the painting techniques. For this purpose, physical, chemical and mineralogical compositions of the paintings were determined by X-Ray Diffraction, Fourier Transform Infrared spectroscopy, Scanning Electron Microscopy coupled with Energy Dispersive spectroscopy and Thermo-Gravimetric Analysis. Analysis results indicated that the paintings were executed using lime-secco technique. In this technique, pigments were mixed with lime and applied on a smooth plaster layer. Pigments used were mainly iron oxides for red, yellow and purple paintings, aluminosilicates such as celadonite for green paintings and lazurite for dark blue paintings.Article Citation - WoS: 1Citation - Scopus: 1Photogrammetric Evaluation Options of an Ancient Monument for Different Survey Levels(Elsevier Ltd., 2016) Uygun, Funda; Turan, Mine; Ocalı, OganRecently, for the purpose of data management, more advanced digital data are required for different survey levels of irregular ancient monuments. For irregularly formed monuments and amorphous surfaces, 2D photographs and 2D measured surveys are inadequate to illustrate the condition of the building for condition reports or relationships between components and materials for structural surveys and conservation decisions, especially in archeological remains. However, image-based documentation techniques can be used as simple tools for different types of surveys due to their ease of use and fast and economical properties. Therefore, the aim of the study is to test multi-image photogrammetric documentation techniques to improve and standardize visual data appending condition reports and further detailed reports regarding conservation of irregular ancient monuments.In the literature, there are many studies about image-based documentation techniques. However, the innovation of the study is to provide an improvement of the pipeline of condition and structural surveys of irregular ancient monuments by making use of photogrammetric techniques.In order to measure the effects of the relationship between the type of documentation technique and survey level on the photogrammetric documentation process of an ancient monument, a series of experiments were designed and the results compared. For this purpose, automated image orientation packages Autodesk 123D and Photosynth and manual image orientation package Tgi3D were evaluated in terms of process time, reliability and level of detail to identify appropriate techniques for different survey levels.This study proved that documentation of the structural characteristics of ancient monuments can be achieved successfully with the Tgi3D package, which has manual workflows. The documentation results might support structural intervention decisions. The 3D models based on automatic workflows might support a preliminary condition survey, since their production takes a relatively short time and scaled models are acceptable for identifying mass characteristics.Article Citation - WoS: 74Citation - Scopus: 85A Transdisciplinary Approach on the Energy Efficient Retrofitting of a Historic Building in the Aegean Region of Turkey(Elsevier Ltd., 2015) Şahin, Cem Doğan; Durmuş Arsan, Zeynep; Tunçoku, Selim Sarp; Broström, Tor; Gökçen Akkurt, GüldenAbstract Buildings account for 40% of total energy consumption in the European Union, yet at the same time they have considerable energy saving potentials. Historic buildings should be treated different from contemporary ones when it comes to energy improvements. The specifications which underline historical, sociocultural and architectural values require certain care during realization of energy saving implementations to sustain these values. The purpose of this study is to demonstrate how the energy efficient retrofitting in historic buildings should be managed in a transdisciplinary approach with a case study conducted on the historic building in ̄zmir - Turkey. A detailed building energy simulation tool was used to determine the impacts of energy efficient retrofits. The actual energy consumption of case building was based on the utility bills regarding electricity and heating fuel consumption. Building energy simulation tool was calibrated by comparing the measured and simulated indoor air temperatures and total energy consumptions. The inappropriate retrofits, which contradict to the cultural heritage values, were eliminated with a transdisciplinary approach. Later appropriate retrofits were gathered into three packages to evaluate their effects on the energy consumption. The results show that energy saving of more than 34% can be obtained without damaging the heritage values.Article Citation - WoS: 28Citation - Scopus: 29Characteristics of Bricks Used in the Domes of Some Historic Bath Buildings(Elsevier Ltd., 2013) Uğurlu Sağın, Elif; Böke, HasanIn this study, characteristics of bricks used in the domes of some historic bath buildings dated to 15th century in Izmir were determined in order to indicate the properties of repair bricks that will be used in the conservation works of the domes. For this purpose, their basic physical properties, elemental and mineralogical compositions, firing temperatures and microstructural properties were determined by using XRF, XRD, SEM-EDS and TGA analysis. Analysis results indicated that the bricks are of low density, high porosity and were produced from raw materials containing low amounts of calcium poor clays fired at low temperatures (<. 900. °C). They are mainly consisted of small pores with r<. 5. μm that make the bricks more susceptible to salt crystallization and freeze-thaw cycles. Although the bricks were fired at low temperatures and susceptible to salt crystallization and freeze thaw cycles, the structural systems of the domes remained without losing their integrity due to the moderate climatic conditions of Izmir. Repair bricks that will be used in the conservation works of the domes should be compatible with the original ones and produced from calcium poor clays by firing at low temperatures.Article Citation - WoS: 6Citation - Scopus: 10Construction Techniques of Domes in Some Ottoman Baths(Elsevier Ltd., 2013) Reyhan, Kader; İpekoğlu, Başak; Böke, HasanIn Ottoman bath architecture, the dome is the spherical structural component covering the square planned dressing hall, warm and hot spaces. In this study, the relationship between bond type, dome span, dome height, dome thickness, and the number of oculi of domes in some Ottoman baths located in Western Anatolia (Turkey) were investigated for the purpose of evaluating construction techniques and architectural characteristics. The studied domes were constructed with brick and lime mortar as binder. In the construction of domes, whole and half bricks with different dimensions were used. In all domes, the surfaces were covered with brick-lime plaster, a thin layer on the interior and a thick layer on the exterior. Terracotta pipes placed in the brick bond or the openings made through the brick bond constituted oculi for lighting. Depending on the brick bond, a linear relationship was determined between the span, height, and number of oculi, whereas a mathematical ratio between 1:10 and 1:12 was determined between the span and thickness of the domes. It has also been noted that as the dome span increases, so does the height, thickness at the springing level and the number of oculi. The domes examined with these properties should be seen as historical documents representing the construction technology of the 15th century. Therefore, these properties of domes must be preserved and special care needs to be taken as not to lose the original qualities of these domes during conservation works.Article Citation - WoS: 9Citation - Scopus: 9Impact of Transparency in the Design of Protective Structures for Conservation of Archaeological Remains(Elsevier Ltd., 2013) Yaka Çetin, Funda; İpekoğlu, BaşakProtective structures are advantageous to extend the life of exposed remains and to display objects of cultural significance. A considerable number of shelters and enclosures have been constructed of transparent materials to enhance the display function. This study aims to examine the utilization of transparency in design of protective structures in terms of advantages and disadvantages. To fulfill this aim, a group of protective structures, which were completely transparent or with transparent façades, such as the Roman Villa at Piazza Armerina, Sicily (Italy), the Fishbourne Roman Palace at West Sussex (England), the Roman Bath at Badenweiler (Germany), the Cathedral ruins at Hamar (Norway) and the Terrace Houses 2 at Ephesus (Turkey) were investigated in terms of their effect on preservation and display of remains. The selected examples illustrated that greenhouse effect, condensation, loss of transparency and excessive lighting are the problems to be considered in the design process. As a result, transparent materials used in protective structures should be selected carefully according to their thermo-physical properties such as solar, thermal and light transmission in order to reduce the negative effects of overheating and condensation.Article Citation - WoS: 10Citation - Scopus: 12Weathering of Andesite Monuments in Archaeological Sites(Elsevier Ltd., 2013) Kaplan, Çaglayan Deniz; Mürtezaoğlu, Fulya; İpekoğlu, Başak; Böke, HasanArchaeological sites, which are the integral parts of cultural heritage, have to be conserved as a whole to have a variety of information about past societies. In this study, the weathering problems of unburied and newly excavated andesite monuments in Aigai archaeological site (Manisa, Turkey) were investigated for the purpose of their conservation. With this intent, the basic physical properties, mineralogical and chemical compositions and microstructural properties of sound and weathered samples were determined by using XRD, SEM-EDS, FT-IR and TGA analysis. Results of the study indicated that the weathering mechanisms of unburied and post-excavated andesite differ from each other. The main weathering problems observed on the unburied stones are mainly increasing microcracks from inner parts to the surfaces, deposition of iron oxides and microbiological colonization due to climatic conditions of the site. In the newly excavated areas, calcium carbonate deposition, accumulation of clay minerals and microbiological colonization are the main weathering problems due to weathering of silica minerals through the action of carbon dioxide and water during burial.Article Citation - WoS: 31Citation - Scopus: 41Metadata-Based Heritage Sites Modeling With E-Learning Functionality(Elsevier Ltd., 2009) Styliadis, Athanasios D.; Akbaylar, İpek; Papadopoulou, Despoina A.; Hasanagas, Nikolaos D.; Roussa, Sotiria A.; Sexidis, Lazaros A.Nowadays, cultural heritage is under threat and danger (pollution, natural disasters, wars, etc.). In this domain, cultural heritage management (CHM) as the art, vocation and practice of managing cultural heritage resources and as a multi-discipline research area has a vital role. In recent years, the innovations, improvements and rapid advances in traditional and geographic (GIS) databases, design computing, digital architecture and archaeology, imaging sensors and scanners, computer modeling software, haptic equipments and e-learning technology, as well as the affordability and availability of many powerful graphics workstations make metadata and 3D modeling techniques for CHM with e-learning and haptic rendering (virtual reality) functionality feasible. This paper addresses the application research issue of incorporating metadata and modeling in a CHM case study and discusses the related e-learning functionality. So, in this article, a practical project is used to demonstrate the functionality and the performance of the proposed 3D modeling metadata based CHM methodology. In particular, the processing steps from image acquisition to the 3D geometric and semantic description of the Galerius Palace "Octagonon" (Thessaloniki, Greece) in a 3D digital environment are presented. Also, emphasis is put on documenting the new term 3D modeling metadata for CHM and on discussing as an open issue the concept personalized e-learning CHM scenarios. The proposed methodology has 10-2 modeling accuracy (i.e. 1% relative inaccuracy) and it is of interest for archaeology, architecture, virtual reality, e-learning, e-culture and virtual tourism.Article Citation - WoS: 24Citation - Scopus: 29An Architectural Assessment Method for New Exterior Additions To Historic Buildings(Elsevier Ltd., 2012) Yüceer, Hülya; İpekoğlu, BaşakThe design approaches of new exterior additions to historic buildings have been among the ongoing debates in the field of architectural conservation. The aim of this study is to develop an assessment method, which can be used to determine the compatibility in architectural expression of the new addition in relation to the characteristics of a historic building. This method is based on the architectural analysis, which includes environmental relations, building-lot relations, mass relations and the facade composition of the historic building both before and after the new addition in relation to the value of a historical building. In this study, a selected group of historic buildings in Izmir, Turkey with new exterior additions was analysed with regard to their exterior architectural characteristics in order to evaluate the compatibility of the new addition, by employing the use of contemporary conservation principles. The importance of this study is to guide architects to form the basis of a decision for developing an integrated approach in designing new additions in the course of the actual design process. On the other hand, the proposed method can be evaluated as a contribution to the emerging field of heritage impact assessments as well as scientific assistance to local governments to criticize specific projects of cultural heritage assets submitted for appraisal. Analysis results showed that the value of the historic building should first clearly be identified and a new addition should bear the identity of its own period. However, instead of altering the scale or form of the historic building, a new addition should complement and contribute to the sense of proportion, disposition and historical pattern. © 2012.
- «
- 1 (current)
- 2
- 3
- »