Conservation and Restoration of Cultural Heritage / Kültür Varlıklarını Koruma ve Onarım
Permanent URI for this collectionhttps://hdl.handle.net/11147/23
Browse
21 results
Search Results
Article Citation - WoS: 8Citation - Scopus: 10Interior Plastering of Ottoman Bath Buildings(Elsevier Ltd., 2019) İpekci, Emre; Uğurlu Sağın, Elif; Böke, HasanOttoman baths were peculiar buildings with their function in community life, architectural characteristics and material use. Their interior spaces were exposed to high humidity and temperatures that made the building structure vulnerable to physical, chemical, physicochemical and biological degradations. Plasters used on the interior wall surfaces were the most important agents to protect the structure from deterioration and provide durability. This study aims to exhibit the plaster characteristics of Çinili Bath in İstanbul which was an outstanding example of Ottoman baths and built by Great Architect Sinan. Basic physical properties, raw material compositions, mineralogical, microstructural and hydraulic properties of original brick-lime plasters called as horasan (khorasan) plasters used on the walls were determined by XRF, XRD, SEM-EDS and TGA. Multilayered plaster application together with the use of glazed tiles were observed on the wall surfaces of all interior spaces. The plasters were produced from pure lime and pozzolanic crushed brick or tile aggregates and hydraulic because of the pozzolanic properties of aggregates. They are stiff, compact and durable in hot and humid conditions of bath buildings due to their self-healing properties and the formation of calcium silicate hydrates and calcium aluminate hydrates at the lime-brick interfaces and in the pores of the pozzolanic brick aggregates by the reaction of lime. Characteristics of brick aggregates were compared with the construction bricks used in the building. Their chemical and mineralogical compositions revealed that the aggregates had not been produced from construction bricks. All the results indicated that brick-lime plasters were the most suitable materials for bath buildings to protect the structure from the effect of water. © 2019 The AuthorsArticle Citation - WoS: 29Citation - Scopus: 35Sustainable Bio-Nano Composite Coatings for the Protection of Marble Surfaces(Elsevier Masson SAS, 2015) Ocak, Y.; Sofuoglu, A.; Tihminlioglu, F.; Böke, H.Water repellency on natural stone surfaces is the most important issue in the protection of stone monuments from effects of atmospheric pollutants. In this study, effectiveness of a bio-nano composite coating, composed of a biodegradable polymer (poly-L-lactide [PLA]) and montmorillonite clay (MMT) was investigated for the protection of marble surfaces from pollution. The clay dispersion in polymer matrices was analyzed by using Scanning Tunnel Electron Microscopy (STEM) and X-Ray Diffraction (XRD), while protection performance was investigated by the measurement of surface roughness, wettability, water vapor permeability, capillary water absorption, and color changes on the marble surfaces. As a result, no alteration on the color of coated marbles was observed, significant improvement was obtained for hydrophobicity of the surface and inhibition of sulfation reaction on the exposed marble surfaces under acidic atmosphere. It could be said that PLA based nanocomposites seem to be promising materials as protective coating agents in reducing the effects of water and atmospheric pollutants on marble surfaces. © 2014 Elsevier Masson SAS.Article Citation - WoS: 74Citation - Scopus: 85A Transdisciplinary Approach on the Energy Efficient Retrofitting of a Historic Building in the Aegean Region of Turkey(Elsevier Ltd., 2015) Şahin, Cem Doğan; Durmuş Arsan, Zeynep; Tunçoku, Selim Sarp; Broström, Tor; Gökçen Akkurt, GüldenAbstract Buildings account for 40% of total energy consumption in the European Union, yet at the same time they have considerable energy saving potentials. Historic buildings should be treated different from contemporary ones when it comes to energy improvements. The specifications which underline historical, sociocultural and architectural values require certain care during realization of energy saving implementations to sustain these values. The purpose of this study is to demonstrate how the energy efficient retrofitting in historic buildings should be managed in a transdisciplinary approach with a case study conducted on the historic building in ̄zmir - Turkey. A detailed building energy simulation tool was used to determine the impacts of energy efficient retrofits. The actual energy consumption of case building was based on the utility bills regarding electricity and heating fuel consumption. Building energy simulation tool was calibrated by comparing the measured and simulated indoor air temperatures and total energy consumptions. The inappropriate retrofits, which contradict to the cultural heritage values, were eliminated with a transdisciplinary approach. Later appropriate retrofits were gathered into three packages to evaluate their effects on the energy consumption. The results show that energy saving of more than 34% can be obtained without damaging the heritage values.Article Citation - WoS: 21Citation - Scopus: 23Determination of Caco 3 and Sio 2 Content in the Binders of Historic Lime Mortars(Springer Verlag, 2012) Uğurlu Sağın, Elif; Böke, Hasan; Aras, Nadir; Yalçın, ŞerifeThe binders of historic mortars composed of small grain sized silica (SiO 2) and carbonated lime (CaCO 3) are considered as the main part that give hydraulic character and high strength to the mortar. In this study, FTIR, SEM-EDS, LIBS and XRD spectroscopy were used to find out the weight ratios of CaCO 3 to SiO 2 in the binders of historic lime mortars. For this purpose, a series of pure calcium carbonate and silica mixture were prepared in ten combinations in varying ratios from 0.5 to 5. Calibration curve was prepared for each analysis by plotting the peak area or intensity ratios of CaCO 3 to SiO 2 versus the weight ratios of CaCO 3 to SiO 2. A good linear correlation coefficient was obtained for each analysis respectively. The analyses were then tested on the binder of the Roman mortar samples. The results indicated that FTIR, SEM-EDS and LIBS spectroscopy are convenient tools to determine the weight ratios of CaCO 3 to SiO 2 in the binders of mortars. But XRD spectroscopy is not convenient for quantitative analysis of binders due to the presence of varied amounts of amorphous or poor crystalline silica in their compositions.Article Citation - WoS: 28Citation - Scopus: 29Characteristics of Bricks Used in the Domes of Some Historic Bath Buildings(Elsevier Ltd., 2013) Uğurlu Sağın, Elif; Böke, HasanIn this study, characteristics of bricks used in the domes of some historic bath buildings dated to 15th century in Izmir were determined in order to indicate the properties of repair bricks that will be used in the conservation works of the domes. For this purpose, their basic physical properties, elemental and mineralogical compositions, firing temperatures and microstructural properties were determined by using XRF, XRD, SEM-EDS and TGA analysis. Analysis results indicated that the bricks are of low density, high porosity and were produced from raw materials containing low amounts of calcium poor clays fired at low temperatures (<. 900. °C). They are mainly consisted of small pores with r<. 5. μm that make the bricks more susceptible to salt crystallization and freeze-thaw cycles. Although the bricks were fired at low temperatures and susceptible to salt crystallization and freeze thaw cycles, the structural systems of the domes remained without losing their integrity due to the moderate climatic conditions of Izmir. Repair bricks that will be used in the conservation works of the domes should be compatible with the original ones and produced from calcium poor clays by firing at low temperatures.Article Citation - WoS: 6Citation - Scopus: 10Construction Techniques of Domes in Some Ottoman Baths(Elsevier Ltd., 2013) Reyhan, Kader; İpekoğlu, Başak; Böke, HasanIn Ottoman bath architecture, the dome is the spherical structural component covering the square planned dressing hall, warm and hot spaces. In this study, the relationship between bond type, dome span, dome height, dome thickness, and the number of oculi of domes in some Ottoman baths located in Western Anatolia (Turkey) were investigated for the purpose of evaluating construction techniques and architectural characteristics. The studied domes were constructed with brick and lime mortar as binder. In the construction of domes, whole and half bricks with different dimensions were used. In all domes, the surfaces were covered with brick-lime plaster, a thin layer on the interior and a thick layer on the exterior. Terracotta pipes placed in the brick bond or the openings made through the brick bond constituted oculi for lighting. Depending on the brick bond, a linear relationship was determined between the span, height, and number of oculi, whereas a mathematical ratio between 1:10 and 1:12 was determined between the span and thickness of the domes. It has also been noted that as the dome span increases, so does the height, thickness at the springing level and the number of oculi. The domes examined with these properties should be seen as historical documents representing the construction technology of the 15th century. Therefore, these properties of domes must be preserved and special care needs to be taken as not to lose the original qualities of these domes during conservation works.Article Citation - WoS: 9Citation - Scopus: 9Impact of Transparency in the Design of Protective Structures for Conservation of Archaeological Remains(Elsevier Ltd., 2013) Yaka Çetin, Funda; İpekoğlu, BaşakProtective structures are advantageous to extend the life of exposed remains and to display objects of cultural significance. A considerable number of shelters and enclosures have been constructed of transparent materials to enhance the display function. This study aims to examine the utilization of transparency in design of protective structures in terms of advantages and disadvantages. To fulfill this aim, a group of protective structures, which were completely transparent or with transparent façades, such as the Roman Villa at Piazza Armerina, Sicily (Italy), the Fishbourne Roman Palace at West Sussex (England), the Roman Bath at Badenweiler (Germany), the Cathedral ruins at Hamar (Norway) and the Terrace Houses 2 at Ephesus (Turkey) were investigated in terms of their effect on preservation and display of remains. The selected examples illustrated that greenhouse effect, condensation, loss of transparency and excessive lighting are the problems to be considered in the design process. As a result, transparent materials used in protective structures should be selected carefully according to their thermo-physical properties such as solar, thermal and light transmission in order to reduce the negative effects of overheating and condensation.Article Citation - WoS: 10Citation - Scopus: 12Weathering of Andesite Monuments in Archaeological Sites(Elsevier Ltd., 2013) Kaplan, Çaglayan Deniz; Mürtezaoğlu, Fulya; İpekoğlu, Başak; Böke, HasanArchaeological sites, which are the integral parts of cultural heritage, have to be conserved as a whole to have a variety of information about past societies. In this study, the weathering problems of unburied and newly excavated andesite monuments in Aigai archaeological site (Manisa, Turkey) were investigated for the purpose of their conservation. With this intent, the basic physical properties, mineralogical and chemical compositions and microstructural properties of sound and weathered samples were determined by using XRD, SEM-EDS, FT-IR and TGA analysis. Results of the study indicated that the weathering mechanisms of unburied and post-excavated andesite differ from each other. The main weathering problems observed on the unburied stones are mainly increasing microcracks from inner parts to the surfaces, deposition of iron oxides and microbiological colonization due to climatic conditions of the site. In the newly excavated areas, calcium carbonate deposition, accumulation of clay minerals and microbiological colonization are the main weathering problems due to weathering of silica minerals through the action of carbon dioxide and water during burial.Article Citation - WoS: 31Citation - Scopus: 41Metadata-Based Heritage Sites Modeling With E-Learning Functionality(Elsevier Ltd., 2009) Styliadis, Athanasios D.; Akbaylar, İpek; Papadopoulou, Despoina A.; Hasanagas, Nikolaos D.; Roussa, Sotiria A.; Sexidis, Lazaros A.Nowadays, cultural heritage is under threat and danger (pollution, natural disasters, wars, etc.). In this domain, cultural heritage management (CHM) as the art, vocation and practice of managing cultural heritage resources and as a multi-discipline research area has a vital role. In recent years, the innovations, improvements and rapid advances in traditional and geographic (GIS) databases, design computing, digital architecture and archaeology, imaging sensors and scanners, computer modeling software, haptic equipments and e-learning technology, as well as the affordability and availability of many powerful graphics workstations make metadata and 3D modeling techniques for CHM with e-learning and haptic rendering (virtual reality) functionality feasible. This paper addresses the application research issue of incorporating metadata and modeling in a CHM case study and discusses the related e-learning functionality. So, in this article, a practical project is used to demonstrate the functionality and the performance of the proposed 3D modeling metadata based CHM methodology. In particular, the processing steps from image acquisition to the 3D geometric and semantic description of the Galerius Palace "Octagonon" (Thessaloniki, Greece) in a 3D digital environment are presented. Also, emphasis is put on documenting the new term 3D modeling metadata for CHM and on discussing as an open issue the concept personalized e-learning CHM scenarios. The proposed methodology has 10-2 modeling accuracy (i.e. 1% relative inaccuracy) and it is of interest for archaeology, architecture, virtual reality, e-learning, e-culture and virtual tourism.Article Citation - WoS: 24Citation - Scopus: 29An Architectural Assessment Method for New Exterior Additions To Historic Buildings(Elsevier Ltd., 2012) Yüceer, Hülya; İpekoğlu, BaşakThe design approaches of new exterior additions to historic buildings have been among the ongoing debates in the field of architectural conservation. The aim of this study is to develop an assessment method, which can be used to determine the compatibility in architectural expression of the new addition in relation to the characteristics of a historic building. This method is based on the architectural analysis, which includes environmental relations, building-lot relations, mass relations and the facade composition of the historic building both before and after the new addition in relation to the value of a historical building. In this study, a selected group of historic buildings in Izmir, Turkey with new exterior additions was analysed with regard to their exterior architectural characteristics in order to evaluate the compatibility of the new addition, by employing the use of contemporary conservation principles. The importance of this study is to guide architects to form the basis of a decision for developing an integrated approach in designing new additions in the course of the actual design process. On the other hand, the proposed method can be evaluated as a contribution to the emerging field of heritage impact assessments as well as scientific assistance to local governments to criticize specific projects of cultural heritage assets submitted for appraisal. Analysis results showed that the value of the historic building should first clearly be identified and a new addition should bear the identity of its own period. However, instead of altering the scale or form of the historic building, a new addition should complement and contribute to the sense of proportion, disposition and historical pattern. © 2012.
- «
- 1 (current)
- 2
- 3
- »