Mechanical Engineering / Makina Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/4129
Browse
6 results
Search Results
Conference Object Digital Twin of a Servo Driver of a Servo Motor as a First Step Towards a Digital Twin of a Robot Mechanism(Springer, 2022) Küçükoğlu, Sefa Furkan; Carbone, Giuseppe; Dede, Mehmet İsmet CanDigital Twin (DT) offers us to acquire actual system’s critical information and hence, it may be possible to develop and produce more suitable systems in terms of low energy consumption and effectiveness. In this way, responsible consumption and production systems can be designed and the system’s parameters can be tuned via DT. In this study, the model of a servomotor system that is used for industrial purposes is experimentally obtained. This study consists of two steps. In the first step, within the embedded control of the system, position and velocity control loops are deactivated. Then through the servo driver, currents with sinusoidal waveforms at various frequencies are applied to the servomotor. The resultant angular velocity of the motor is monitored and recorded. The amplitude of the current is kept constant during this study. The frequency of the current, however, is increased logarithmically. By using these data, a first-order transfer function (TF) is identified for the motor model. In the second step, all control loops are activated. Consequently, the total servomotor system could be represented in a digital environment. Furthermore, the static friction issue is overcome by using a Coulomb friction model with stiction effect. Finally, several experiments are conducted and then results are compared with the digital model of the servomotor system. The results clearly show that digital model can fairly represent the physical system.Article Citation - WoS: 3Citation - Scopus: 3Experimental Structural Stiffness Analysis of a Surgical Haptic Master Device Manipulator(American Society of Mechanical Engineers, 2021) Görgülü, İbrahimcan; Dede, Mehmet İsmet Can; Carbone, GiuseppeThis paper deals with haptic devices for master-slave telesurgical applications. Namely, a stiffness model fitting methodology and its fine-tuning are proposed based on experimental results. In particular, the proposed procedure is based on virtual joint structural stiffness modeling to be applied in time-efficient compliance compensation strategies. A specific case study is discussed by referring to the HISS haptic device that has been developed and built at Izmir Institute of Technology. Two different experimental setups are designed for stiffness evaluation tests. Experimental results are discussed to demonstrate their implementation in the proposed methodology for the fine-tuning of stiffness model.Article Citation - WoS: 24Citation - Scopus: 30Time Efficient Stiffness Model Computation for a Parallel Haptic Mechanism Via the Virtual Joint Method(Elsevier, 2020) Carbone, Giuseppe; Görgülü, İbrahimcan; Dede, Mehmet İsmet CanHaptic devices are used for displaying a range of mechanical impedance values to the user. This impedance is regulated by a real-time control loop depending on the position information of the end-effector, which is usually acquired indirectly by using forward kinematics equations. Nevertheless, the kinematic model is insufficient to obtain accurate values if there are non-negligible compliant displacements. This gives a strong motivation for implementing a real-time stiffness model in the haptic control loop for improving its accuracy. Additionally, stiffness performance indices can be used at the design stage for enhancing the haptic devices impedance range within optimal design procedures. Fast solutions of a stiffness model are required for a real-time control as well as for decreasing the optimization time during a design process with a trade-off between accuracy and computational costs. In this study, we propose a computation time-efficient stiffness analysis of a parallel haptic device mechanism. The accuracy and computational costs of the proposed model are calculated and compared with a model that is obtained via a finite element method to demonstrate the effectiveness of the proposed approach with the desired real-time and accuracy performance. (C) 2019 Elsevier Ltd. All rights reserved.Book Part Citation - Scopus: 5An Experimental Test Procedure for Validation of Stiffness Model: a Case Study for R-Cube Parallel Mechanism(Springer, 2019) Görgülü, İbrahimcan; Dede, Mehmet İsmet Can; Carbone, GiuseppeHaptic device manipulators are used for generating haptic feedback. This feedback is composed of force which is regulated with respect to motion information. Accurate generation of the feedback requires exact position acquisition of the end-effector. Due to the compliant bodies of a manipulator, a stiffness model is needed to predict this position. Previously, Virtual Joint Method was adopted to obtain the stiffness model of an R-CUBE parallel haptic mechanism. In this paper, experimental test setup and experimental procedure are described for validating this stiffness model, its engineering feasibility and soundness of the proposed model.Conference Object Citation - Scopus: 1Structural Compliance Effects on the Accuracy and Safety of a R-Cube Haptic Device(Springer Verlag, 2019) Carbone, Giuseppe; Acinapura, Antonio; Mundo, Domenico; Görgülü, İbrahimcan; Dede, Mehmet İsmet CanThis paper addresses the contribution of structural compliance on stiffness and safety of a R-CUBE Haptic Device. Structural compliance is determined in several poses via FEM analysis and addressed by referring to local and global indices of performance. Results are also compared with evidences from experimental tests. Comparison of numerical and experimental data allows to identify and separate the contributions to the overall compliance that are due to the structural stiffness, and other contributions such as joint clearance, pose and loading conditions.Conference Object Citation - Scopus: 3Design and Simulation of a Novel Hybrid Leg Mechanism for Walking Machines(Springer Verlag, 2018) Demirel, Murat; Carbone, Giuseppe; Ceccarelli, Marco; Kiper, GökhanThis paper introduces a novel hybrid structure design that is composed of rigid links and cables for a robotic leg with static walking. The proposed mechanism is characterized by actuated hip joints, passive knee joints and an actuated prismatic foot joint. The foot is the moving platform of the proposed mechanism which possesses pure translational motion due to the passive parallelograms with cables. Kinematic analysis has been worked out for evaluating a typical human-like gait trajectory. A 3-D model has been developed and simulation are made in SolidWorks® environment. Simulation results show that the proposed mechanism is able to perform an ovoid walking cycle of a foot point and the computed actuator torques and forces are in a feasible range for a low-cost and easy-operation design. The simulation results will be used for a prototype construction in a future work.