Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
10 results
Search Results
Article Citation - WoS: 7Citation - Scopus: 8Enrichment of Trace Element Concentrations in Coal and Its Combustion Residues and Their Potential Environmental and Human Health Impact: Can Coal Basin, Nw Turkey as a Case Study(Inderscience Enterprises, 2016) Baba, Alper; Gürdal, Gülbin; Şanlıyüksel Yücel, DenizIn this study, the variation of trace element concentrations ( total of 48 trace elements including rare earth elements) in coal, coal ash and fly ash were examined and compared with coal Clarke values. Results showed that the average concentrations of trace elements including As, B, Cu, Ce, Co, Cs, Gd, Hf, La, Lu, Mo, Nd, Nb, Pr, Pb, Sc, Sm, Ta, Tb, Th, U, V, W, Y, Yb, Zn and Zr in the Can Basin coals are higher than their respective Clarke values for world low-rank coals. The elements As, Cu, Co, Cs, Mo, Nb, Sc, Pb, Pr, Th, U, V, Zn and Zr are enriched in coal ashes, whereas As, Co, Nb, Sc, U and V are enriched in fly ashes. Among the elements, maximum enrichment in coal was observed for As, with the average concentration of 253.5 ppm As in the Can Basin coals, while the coal Clarke value is 14 ppm and world average value is 8.3 ppm. From the ecotoxicological point of view, combustion residues formed by indoor combustion of coal and/or in thermal power plants may be a hazard to the environment and to aquatic and terrestrial life including human beings, particularly As, trace elements and released radioactive elements.Article Citation - WoS: 5Citation - Scopus: 7Experimental and Modeling Study of Strength of High Strength Concrete Containing Binary and Ternary Binders(Foundation Cement, Lime, Concrete, 2011) Erdem, Tahir Kemal; Tayfur, Gökmen; Kırca, ÖnderSilica fume (SF), fl y ash (FA) and ground granulated blastfurnace slag (S) are among the most widely utilized mineral additions for normal strength concrete (NSC) and high strength concrete (HSC). High Reactivity Metakaolin (HRMK) is a relatively new mineral addition, produced by calcination of highly pure kaolin. The replacement of cement with HRMK increases the strength, especially at early ages, and improves durability of concrete. (1-3). Pumice (P) is a porous volcanic glass containing 60-75 SiO2% and 13-17% Al2O3. When fi nely ground, it shows pozzolanic characteristics but it is generally used as a lightweight aggregate in the concrete industry (4, 5). HRMK and P have white color and, therefore, are useful for production of white concrete when applied with white Portland cement (WPC)Article Citation - WoS: 22Citation - Scopus: 26Coal Fly Ash as a Potential Fixation Reagent for Radioactive Wastes(Elsevier Ltd., 2015) Lieberman, Roy Nir; Green, Uri; Segev, Giora; Polat, Mehmet; Mastai, Yitzhak; Cohen, HaimIsrael produces ∼1.3 Mt/year of fly ash (FA), a byproduct of its coal-fired power plants. Due to increasing environmental regulations, these imported coals are processed to reduce the sulfur concentration (∼0.6%). These processing methods result in a material that has an enriched alkali/alkali earth component with pozzolanic and basic properties (pH > 10.5). FAs are utilized worldwide, mainly as a cement additive for the construction industry. Recently, it was demonstrated that Class F FA can act as an excellent fixation reagent for acidic wastes from the phosphate or the oil regeneration industries. In the current work the potential utilization of Class F FAs as fixation reagents for low-activity radioactive waste from the nuclear industry was examined. Aqueous solutions containing radionuclide simulants: cesium (Cs+), strontium, (Sr2+), and cerium (Ce3+, Ce4+) were used as case studies with promising results. It is suggested that the primary fixation mechanism involves the aluminate/silicate anions at the FA surface. A novel experimental fixation approach utilizing the formation of carbonates is demonstrated and a new interaction mechanism is suggested based on the electrostatic interactions of the positively charged fine precipitates with the negatively charged FA surface. © 2015 Elsevier Ltd. All rights reserved.Article Citation - WoS: 47Citation - Scopus: 53Effect of Sustained Flexural Loading on Self-Healing of Engineered Cementitious Composites(Japan Concrete Institute, 2013) Özbay, Erdogan; Şahmaran, Mustafa; Yücel, Hasan Erhan; Erdem, Tahir Kemal; Lachemi, Mohamed; Li, Victor C.This paper aims to clarify the effects of sustained flexural loading on the self-healing behavior of Engineered Cementitious Composites (ECC). Prismatic specimens of ECC mixtures with two different levels of Class-F fly ash content were cast. Flexural loading was applied to the specimens at 28 days age to generate severe amount of microcracks. The specimens were then stored under continuous water or air exposures with or without sustained mechanical loading, for up to 90 days. For specimens under sustained mechanical loading, the applied sustained load level was 60% of the ultimate flexural strength. The extent of damage was determined as a percentage of loss in mechanical properties. The influences of different exposure regimes and sustained mechanical loading on mechanical properties of ECC mixtures were investigated. Microstructural changes within the microcracks were also analyzed.Article Citation - WoS: 75Citation - Scopus: 87Use of Spent Foundry Sand and Fly Ash for the Development of Green Self-Consolidating Concrete(Springer Verlag, 2011) Şahmaran, Mustafa; Lachemi, Mohamed; Erdem, Tahir Kemal; Yücel, Hasan ErhanIn the United States alone, the foundry industry discards up to 10 million tons of sand each year, offering up a plentiful potential resource to replace sand in concrete products. However, because the use of spent foundry sand (SFS) is currently very limited in the concrete industry, this study investigates whether SFS can successfully be used as a sand replacement material in cost-effective, green, self-consolidating concrete (SCC). In the study, SCC mixtures were developed to be even more inexpensive and environmentally friendly by incorporating Portland cement with fly ash (FA). Tests done on SCC mixtures to determine fresh properties (slump flow diameter, slump flow time, V-funnel flow time, yield stress, and relative viscosity), compressive strength, drying shrinkage and transport properties (rapid chloride permeability and volume of permeable pores) show that replacing up to 100% of sand with SFS and up to 70% Portland cement with FA enables the manufacture of green, lower cost SCC mixtures with proper fresh, mechanical and durability properties. The beneficial effects of FA compensate for some possible detrimental effects of SFS.Article Citation - WoS: 29Citation - Scopus: 38Encapsulating Fly Ash and Acidic Process Waste Water in Brick Structure(Elsevier Ltd., 2010) Köseoğlu, K.; Polat, Mehmet; Polat, HürriyetFly ash contains metals such as cadmium, iron, lead, aluminum and zinc in its structure in appreciable amounts. These metals can leach out into surface and ground waters if fly ash is not properly disposed of. A similar problem also exists for acidic process waste waters discharged by numerous industries. The purpose of this study was to utilize such wastes as additives in the production of construction quality bricks for the purpose of waste elimination. The bricks produced were subjected to flexural strength and water retention capacity tests along with heavy metal leaching experiments in order to determine the applicability of the procedure and the best possible recipes. This paper summarizes the results obtained in these tests along with the possible mechanisms involved in stabilizing the two wastes in the brick structure. © 2009 Elsevier B.V. All rights reserved.Article Citation - WoS: 61Citation - Scopus: 69Leaching Characteristics of Fly Ash From Fluidized Bed Combustion Thermal Power Plant: Case Study: Çan (çanakkale-Turkey)(Elsevier Ltd., 2010) Baba, Alper; Gürdal, Gülbin; Şengünalp, FatmaIt is known that the concentration of elements of fly ash varies due to the used-coal and the used-lime qualities varying in different periods. In the Çan Thermal Power Plant (CTPP) located at northwestern Turkey, Çan (Çanakkale) basin coals, which are classified as lignite to sub-bituminous C coal with high total sulphur (0.4-12.22%) and a broad range of ash contents (3.2-44.6%) are mainly used. Performed studies reveal that some toxic elements exit in the coal, including As, U and V. Also, while the As, Cu, Co and Hg contents in coal increases, the sulphur contents in coal also increase. Additionally, trace elements that have inorganic compounds in coal are mobilized into air during the combustion process. This poses a big risk for human health and keeping the environment when Çan Basins low quality lignite is burned, it's the fly ash that contains several toxic elements which can leach out and contaminate the water resources. In this study, toxicity tests were conducted on the fly ash samples that were obtained from the fluidized bed combustion of Çan Thermal Power Plant. The results showed that water temperature, pH and the quality of the limestone used were the most important factors affecting the leaching properties. Concentration of some toxic elements found in the fly ash, such as; As, Cd, Cr, Pb, Se and Zn were analyzed. Concentration richness of some heavy metals were attributed to the increase of water temperature, especially when pH is lower than 5. At pH=5 value, there is no clear explanation of each heavy metal presence in the fly ash from fluidized bed combustion thermal power plant. © 2010 Elsevier B.V. All rights reserved.Article Citation - WoS: 14Citation - Scopus: 15Neutralization of an Extremely Acidic Sludge and Stabilization of Heavy Metals in Flyash Aggregates(Elsevier Ltd., 2007) Polat, Mehmet; Güler, Erkan; Lederman, Eli; Cohen, HaimAn extremely acidic, heavy metal-rich sludge (pH = -1.2) was scrubbed with a Class-F fly ash in order to simultaneously neutralize the acidity and stabilize the heavy metals contained in both wastes. This paper outlines the leaching behavior of the aggregate material generated by scrubbing. For proper fly ash/sludge ratios, the fly ash acted as an outstanding neutralizer for the acidic waste. Leaching of heavy metals from the aggregate samples was below the environmental limits within a pH range between 3 and 9. Subsequent washing of the leached aggregate with acidic CALWET solutions did not result in an additional release of heavy metals. It is proposed that coordinative bonding of the metal cations onto neutral surface sites and electrostatic adsorption led to stabilization of the heavy metals within the aggregate structure below hydrolysis pHs.Article Citation - WoS: 64Citation - Scopus: 70Mechanical and Morphological Properties of Recycled High-Density Polyethylene, Filled With Calcium Carbonate and Fly Ash(John Wiley and Sons Inc., 2006) Atikler, Ulaş; Başalp, Dildare; Tıhmınlıoğlu, FundaIn this study, mechanical and morphological properties of composites made up of recycled high-density polyethylene (HDPE) filled with calcium carbonate and fly ash (FA) were studied. Interfacial interactions were modified to improve the filler compatibility and mechanical properties of the composites by surface treatment of the FA filler with 3-amino propyl triethoxy silane. The composites were prepared by using a Thermo Haake Rheomixer. Effect of filler loading and treatment of FA with silane coupling agent on mechanical and morphological properties were investigated and it was found that silane treatment indicated significant improvements on the mechanical properties of the HDPE-FA composites. The improvement with silane treatment of FA was also confirmed by applying the Pukanszky model. Scanning electron microscopy on the fracture surface of composites had given direct evidence of better interfacial adhesion via silane treatment.Article Citation - WoS: 123Citation - Scopus: 131A New Methodology for Removal of Boron From Water by Coal and Fly Ash(Elsevier Ltd., 2004) Polat, Hürriyet; Vengosh, Avner; Pankratov, Irena; Polat, MehmetHigh levels of boron concentrations in water present a serious problem for domestic and agriculture utilizations. The recent EU drinking water directive defines an upper limit of 1 mgB/I. In addition, most crops are sensitive to boron levels >0.75 mg/1 in irrigation water. The boron problem is magnified by the partial (∼60%) removal of boron in reverse osmosis (RO) desalination due to the poor ionization of boric acid and the accumulation of boron in domestic sewage effluents. Moreover, high levels of boron are found in regional groundwater in some Mediterranean countries, which requires special treatment in order to meet the EU drinking water regulations. Previous attempts to remove boron employed boron-specific ion-exchange resin and several cycles of RO desalination under high pH conditions. Here, we present an alternative methodology for boron removal by using coal and fly ash as adsorbents. We conducted various column and batch experiments that explored the efficiency of boron removal from seawater and desalinated seawater using several types of coal and fly ash materials under controlled conditions (pH, liquid/solid ratio, time of reaction, pre-treatment, regeneration). We examined the effect of these factors on the boron removal capacity and the overall chemical composition of the residual seawater. The results show that the selected coal and fly ash materials are very effective in removing boron such that the rejection ratio of boron can reach 95% of the initial boron content under certain optimal conditions (e.g., pH = 9, L/S = 1/10, reaction time > 6 h). Our experiments demonstrated that use of glycerin enables regeneration of boron uptake into coal, but the boron uptake capacity of fly ash reduces after several cycles of treatment-reaction. The boron removal is associated with Mg depletion and Ca enrichment in the residual seawater and conversely with relative Mg enrichment and Ca depletion in the residual fly ash. We propose that the reaction of Ca-rich fly ash with Mg-rich seawater causes co-precipitation of magnesium hydroxide in which boron is co-precipitated. The new methodology might provide an alternative technique for boron removal in areas where coal and fly ash are abundant.