Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
4 results
Search Results
Article Citation - WoS: 6Citation - Scopus: 5Gelatin-Containing Porous Polycaprolactone Polyhipes as Substrates for 3d Breast Cancer Cell Culture and Vascular Infiltration(Frontiers Media Sa, 2024) Jackson, Caitlin E.; Doyle, Iona; Khan, Hamood; Williams, Samuel F.; Dikici, Betul Aldemir; Ledesma, Edgar Barajas; Claeyssens, FrederikTumour survival and growth are reliant on angiogenesis, the formation of new blood vessels, to facilitate nutrient and waste exchange and, importantly, provide a route for metastasis from a primary to a secondary site. Whilst current models can ensure the transport and exchange of nutrients and waste via diffusion over distances greater than 200 mu m, many lack sufficient vasculature capable of recapitulating the tumour microenvironment and, thus, metastasis. In this study, we utilise gelatin-containing polymerised high internal phase emulsion (polyHIPE) templated polycaprolactone-methacrylate (PCL-M) scaffolds to fabricate a composite material to support the 3D culture of MDA-MB-231 breast cancer cells and vascular ingrowth. Firstly, we investigated the effect of gelatin within the scaffolds on the mechanical and chemical properties using compression testing and FTIR spectroscopy, respectively. Initial in vitro assessment of cell metabolic activity and vascular endothelial growth factor expression demonstrated that gelatin-containing PCL-M polyHIPEs are capable of supporting 3D breast cancer cell growth. We then utilised the chick chorioallantoic membrane (CAM) assay to assess the angiogenic potential of cell-seeded gelatin-containing PCL-M polyHIPEs, and vascular ingrowth within cell-seeded, surfactant and gelatin-containing scaffolds was investigated via histological staining. Overall, our study proposes a promising composite material to fabricate a substrate to support the 3D culture of cancer cells and vascular ingrowth.Article Citation - WoS: 27Citation - Scopus: 27In Vivo Bone Regeneration Capacity of Multiscale Porous Polycaprolactone-Based High Internal Phase Emulsion (polyhipe) Scaffolds in a Rat Calvarial Defect Model(American Chemical Society, 2023) Aldemir Dikici, Betül; Chen, Min-Chia; Dikici, Serkan; Chiu, Hsien-Chung; Claeyssens, FrederikGlobally, one of the most common tissue transplantationproceduresis bone grafting. Lately, we have reported the development of polymerizedhigh internal phase emulsions (PolyHIPEs) made of photocurable polycaprolactone(4PCLMA) and shown their potential to be used as bone tissue engineeringscaffolds in vitro. However, it is essential to evaluatethe in vivo performance of these scaffolds to investigatetheir potential in a clinically more relevant manner. Therefore, inthis study, we aimed to compare in vivo performancesof macroporous (fabricated using stereolithography), microporous (fabricatedusing emulsion templating), and multiscale porous (fabricated usingemulsion templating and perforation) scaffolds made of 4PCLMA. Also,3D-printed macroporous scaffolds (fabricated using fused depositionmodeling) made of thermoplastic polycaprolactone were used as a control.Scaffolds were implanted into a critical-sized calvarial defect, animalswere sacrificed 4 or 8 weeks after implantation, and the new boneformation was assessed by micro-computed tomography, dental radiography,and histology. Multiscale porous scaffolds that include both micro-and macropores resulted in higher bone regeneration in the defectarea compared to only macroporous or only microporous scaffolds. Whenone-grade porous scaffolds were compared, microporous scaffolds showedbetter performance than macroporous scaffolds in terms of mineralizedbone volume and tissue regeneration. Micro-CT results revealed thatwhile bone volume/tissue volume (Bv/Tv) values were 8 and 17% at weeks4 and 8 for macroporous scaffolds, they were significantly higherfor microporous scaffolds, with values of 26 and 33%, respectively.Taken together, the results reported in this study showed the potentialapplication of multiscale PolyHIPE scaffolds, in particular, as apromising material for bone regeneration.Article Citation - WoS: 14Citation - Scopus: 16Synergistic Effect of Type and Concentration of Surfactant and Diluting Solvent on the Morphology of Emulsion Templated Matrices Developed as Tissue Engineering Scaffolds(Elsevier, 2022) Claeyssens, Frederik; Aldemir Dikici, Betül; Dikici, SerkanEmulsion templating is an advantageous route for the fabrication of tissue engineering scaffolds. Emulsions are mostly stabilised using surfactants, and the performances of the surfactants depend on various parameters such as emulsification temperature and the presence of the electrolytes. In this study, we suggest that diluting solvent type also has a dramatic impact on the efficiency of the surfactant and morphology of the polymerised emulsions. For this, morphologies of polycaprolactone methacrylate-based polymerised emulsions, which are designed for tissue engineering applications and in vitro biocompatibilities, were shown by our group, prepared using four different surfactants, and three different solvents were investigated. Results showed that the diluting solvent used in the emulsion composition has a strong impact on the performance of the surfactant and consequently on the morphology of polymerised emulsions. Increasing surfactant concentration and diluting solvent volume have an opposite impact on the characteristics of emulsions. Scaffolds with average pore sizes changing from 10 to 78 μm could be fabricated. Establishing these relations enables us to have control over the overall morphology of polymerised emulsions and precisely engineer them for specific tissue engineering applications by tuning solvent and surfactant type and concentration.Article Citation - WoS: 46Citation - Scopus: 46Thiolene- and Polycaprolactone Methacrylate-Based Polymerized High Internal Phase Emulsion (polyhipe) Scaffolds for Tissue Engineering(American Chemical Society, 2022) Aldemir Dikici, Betül; Malayeri, Atra; Sherborne, Colin; Dikici, Serkan; Paterson, Thomas; Dew, Lindsey; Claeyssens, FrederikHighly porous emulsion templated polymers (PolyHIPEs) provide a number of potential advantages in the fabrication of scaffolds for tissue engineering and regenerative medicine. Porosity enables cell ingrowth and nutrient diffusion within, as well as waste removal from, the scaffold. The properties offered by emulsion templating alone include the provision of high interconnected porosity, and, in combination with additive manufacturing, the opportunity to introduce controlled multiscale porosity to complex or custom structures. However, the majority of monomer systems reported for PolyHIPE preparation are unsuitable for clinical applications as they are nondegradable. Thiol-ene chemistry is a promising route to produce biodegradable photocurable PolyHIPEs for the fabrication of scaffolds using conventional or additive manufacturing methods; however, relatively little research has been reported on this approach. This study reports the groundwork to fabricate thiol- and polycaprolactone (PCL)-based PolyHIPE materials via a photoinitiated thiolene click reaction. Two different formulations, either three-arm PCL methacrylate (3PCLMA) or four-arm PCL methacrylate (4PCLMA) moieties, were used in the PolyHIPE formulation. Biocompatibility of the PolyHIPEs was investigated using human dermal fibroblasts (HDFs) and human osteosarcoma cell line (MG-63) by DNA quantification assay, and developed PolyHIPEs were shown to be capable of supporting cell attachment and viability.