Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
3 results
Search Results
Article Citation - WoS: 7Citation - Scopus: 7Gravity Compensation of a 2r1t Mechanism With Remote Center of Motion for Minimally Invasive Transnasal Surgery Applications [article](Cambridge University Press, 2023) Aldanmaz, Ataol Behram; Ayit, Orhan; Kiper, Gökhan; Dede, Mehmet İsmet CanThis work addresses the gravity balancing of a 2R1T (2 rotations – 1 translation) mechanism with remote center of motion. A previously developed balancing solution is modified and applied to a prototype and test results are presented. The mechanism is an endoscope holder for minimally invasive transnasal pituitary gland surgery. In this surgery, the endoscope is inserted through a nostril of the patient through a natural path to the pituitary gland. During the surgery, it is vital for the manipulator to be statically balanced so that in case of a motor failure, the patient is protected against any harmful motion of the endoscope. Additionally, static balancing takes the gravitational load from the actuators and hence facilitates the control of the mechanism. The mechanism is a 2URRR-URR type parallel manipulator with three legs. The payload mass is distributed to the legs on the sides. By using counter-masses for two links of each leg, the center of mass of each leg is lumped on the proximal link which simplifies the problem to balancing of a two degree-of-freedom inverted pendulum. The two proximal links with the lumped mass are statically balanced via springs. Dynamic simulations indicate that when the mechanism is statically balanced, generated actuator torques are reduced by 93.5%. Finally, the balancing solution is implemented on the prototype of the manipulator. The tests indicate that the manipulator is statically balanced within its task space when the actuators are disconnected. When the actuators are connected, the torque requirements decrease by about 37.8% with balancing.Article Citation - WoS: 1Citation - Scopus: 1Enumeration and Instantaneous Mobility Analysis of a Class of 3-Upu Parallel Manipulators With Equilateral Triangular Platforms(Cambridge University Press, 2022) Boztaş, Sercan; Kiper, GökhanIn this study, several joint axis orientations on equilateral platforms and the limbs of 3-UPU parallel manipulators (PMs) are examined. The generated joint layouts for the platforms were matched with each other to generate and enumerate manipulator architectures based on certain assumptions. The structures of thus obtained manipulators are examined and limb types were determined. These limb types were analyzed using screw theory. The instantaneous mobility of the manipulators and the motion characteristics of the moving platforms are tabulated. The finite mobility analysis of one of the manipulators is performed using a software package as an example. Among several different 3-UPU PM architectures, 118 novel 3-UPU PMs with non-parasitic 3-degrees-of-freedom are significantly important. The classified 3-UPU PMs with determined motion characteristics can be used by researchers as a design alternative for their specific design task. © The Author(s) 2021. Published by Cambridge University Press.Article Citation - WoS: 11Citation - Scopus: 16Trajectory Planning for a Planar Macro-Micro Manipulator of a Laser-Cutting Machine(Emerald Group Publishing Ltd., 2016) Uzunoğlu, Emre; Dede, Mehmet İsmet Can; Kiper, GökhanPurpose-In the industry, there is always a demand to shorten the task completion durations to maximize the efficiency of the operation. This work focuses on making use of a special type of kinematic redundancy, macro-micro manipulation, to minimize the task completion duration. The purpose of this paper is to develop the most convenient trajectory planner to be integrated with industrial computerized numerical control (CNC) systems to resolve kinematic redundancy for task duration minimization. Design/methodology/approach-A special type of kinematic redundancy is devised by using two kinematically different mechanisms that have different advantages, which are named as macro and micro mechanisms. In this case, the control design including the trajectory planning should be devised taking into account the distinct advantages of both mechanisms. A new trajectory planning algorithm is designed and used for the constructed planar laser-cutting machine, and some benchmark pieces are cut. Findings-Offline method has practical limitations for employment in a real case scenario such as assuming infinite jerk limits for each axis motion. This limitation was removed by using an online trajectory generation technique. Experimental test results indicate that the online trajectory planning technique developed for the macro-micro mechanism to shorten the task duration was successful. Practical implications-Although the new trajectory planning algorithm is implemented for a laser-cutting machine, it can also be used for other manufacturing systems that require higher acceleration and accuracy levels than the conventional machines. The new algorithm is compatible with the commercially available CNC systems. Originality/value-In this work, a new approach to reducing the task duration for planar machining operations was introduced by making use of macro-micro manipulation concept. The core novelty of the work is devising trajectory planning algorithms to get the most efficiency in terms of acceleration limits from a macro-micro manipulation while making these algorithms deployable to most of the CNC systems.