Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
6 results
Search Results
Article Citation - WoS: 10Citation - Scopus: 11Liquefaction of Oak Wood Using Various Solvents for Bio-Oil Production(AMER CHEMICAL SOC, 2023) Öcal, Bulutcem; Yüksel, AslıRapidly increasing global energy demand resulting from the growing population and worldwide development has increased the consumption of limited fossil fuel. The usage causes severe environmental deterioration by CO2 emission, which has sparked interest in finding green, renewable, and sustainable alternative sources of energy. Bio-oil, derived from several biomasses via liquefaction, is a promising candidate to replace fossil fuels. Turkey's land (27%) is covered with forested areas (consisting of mostly oak trees). Therefore, it has great potential for cheap lignocellulosic feedstock forest residues from industrial applications and harvesting. In the present study, the thermal liquefaction of oak wood particles (OWP) was performed using various solvents in addition to water, namely, ethanol, 1-butanol, and 1,4-dioxane. The experiments were carried out in a batch reactor for 1 and 2 h residence times at different temperatures (210, 240, and 270 degrees C). Bio-oil samples obtained at 270 degrees C and a 1 h residence time determined as optimum conditions were analyzed with TGA, CHNS elemental analysis, FTIR, and GC-MS. 1,4-Dioxane showed the best performance in yielding the maximum bio-oil with 51.8% at those conditions. The higher heating values of the bio-oils ranged from 22.1 to 35 MJ/kg. Phenolic groups were the predominant components of bio-oil produced from OWP, while the intensity of alcohols, ketones, and acids varied based on used solvents. Based on energy recovery calculations, the enhancement of pristine OWP's energy efficiency depended on bio-oil yield, and quality was confirmed for all solvent types (1,4-dioxane > 1-butanol > water > ethanol).Article Citation - WoS: 10Citation - Scopus: 12Novel Hybrid Adsorption-Electrodialysis (aded) System for Removal of Boron From Geothermal Brine(American Chemical Society, 2022) Altınbaş, Bekir Fırat; Orak, Ceren; Ökten, Hatice Eser; Yüksel, AslıA novel hybrid adsorption-electrodialysis (AdED) system to remove environmentally harmful boron from geothermal brine was designed and effective operating parameters such as pH, voltage, and flow rate were studied. A cellulose-based adsorbent was synthesized from glycidyl methacrylate (GMA) grafted cellulose and modified with a boron selective n-methyl-d-glucamine (NMDG) group and characterized with SEM-EDX, FT-IR, and TGA analyses. Batch adsorption studies revealed that cellulose-based adsorbent showed a remarkable boron removal capacity (19.29 mg/g), a wide stable operating pH range (2-10), and an adsorption process that followed the Freundlich isotherm (R2= 0.95) and pseudo-second-order kinetics (R2= 0.99). In the hybrid AdED system, the optimum operating parameters for boron removal were found to be a pH of 10, a voltage of 10 V, a flow rate of 100 mL/min, and an adsorbent dosage of 4 g/L. The presence of the adsorbent in the hybrid system increased boron removal from real geothermal brine (containing 199 ppm boron) from 7.2% to 73.3%. The results indicate that the designed AdED system performs better than bare electrodialysis for boron removal from ion-rich real geothermal brine while utilizing environmentally friendly cellulose-based adsorbent.Article Citation - WoS: 11Citation - Scopus: 12Box-Behnken Design for Hydrogen Evolution From Sugar Industry Wastewater Using Solar-Driven Hybrid Catalysts(American Chemical Society, 2022) Orak, Ceren; Yüksel, AslıHydrogen is a clean and green fuel and can be produced from renewable sources via photocatalysis. Solar-driven hybrid catalysts were synthesized and characterized (scanning electron microscopy (SEM), transmission electron microscopy (TEM), Brunauer-Emmett-Teller (BET), X-ray diffraction (XRD), photoluminescence (PL) spectroscopy, and UV-vis diffuse reflectance spectroscopy (DSR)), and the results implied that graphene-supported LaRuO3is a more promising photocatalyst to produce hydrogen and was used to produce hydrogen from sugar industry wastewater. To investigate the main and interaction effects of reaction parameters (pH, catalyst amount, and [H2O2]0) on the evolved hydrogen amount, the Box-Behnken experimental design model was used. The highest hydrogen evolution obtained was 6773 μmol/gcatfrom sugar industry wastewater at pH 3, 0.15 g/L GLRO, and 15 mM H2O2. Based on the Pareto chart for the evolved hydrogen amount using GLRO, among the main effects, the only effective parameter was the catalyst amount for the photocatalytic hydrogen evolution from sugar industry wastewater. In addition, the squares of pH and two-way interaction of pH and [H2O2]0were also statistically efficient over the evolved hydrogen amount.Article Citation - WoS: 7Citation - Scopus: 7Cross-Linked Phosphorylated Cellulose as a Potential Sorbent for Lithium Extraction From Water: Dynamic Column Studies and Modeling(American Chemical Society, 2022) Recepoğlu, Yaşar Kemal; Yüksel, AslıPhosphorylated functional cellulose was cross-linked with epichlorohydrin at different ratios because it is a very hydrophilic substance that instantly swells to form a hydrogel when it comes into contact with water. It was aimed to utilize a continuously packed bed column to recover lithium from water under varying operating conditions such as flow rate and bed height. The characterization results confirmed cross-linking based on morphology, structure, surface area, and thermal stability differences. Lithium recovery was more efficient with a low flow rate, but the dynamic sorption process was independent of bed height. The total capacities at the three flow rates with 1.5 cm bed height were 33.56, 30.15, and 25.54 mg g-1, and the total saturation times at the three different bed heights with 0.5 mL min-1 flow rate were 659, 1001, and 1007 min, respectively. Only 15.75 mL of 5% H2SO4 solution was required to desorb approximately 100% of Li from the saturated sorbent.Article Citation - WoS: 13Citation - Scopus: 11Valorization of Olive Tree Pruning Waste for Potential Utilization in Lithium Recovery From Aqueous Solutions(Springer, 2022) Nampeera, Jackline; Recepoğlu, Yaşar Kemal; Yüksel, AslıOlive tree pruning waste, mainly composed of olive branches, was converted into a value-added and sustainable product capable of lithium as a biosorbent through alkali treatment and phosphorylation reaction. Characterization studies were performed by SEM–EDX, XPS, FTIR, and TGA. Factors affecting biosorption mechanism, i.e., sorbent dosage, pH, initial Li+ concentration and temperature, and competitive ions’ presence, were investigated the synthesized functionalized olive branches (FOB). A commercial lithium selective resin, Lewatit TP 260, was also compared with FOB in batch and column studies. The Freundlich model fits adsorption isotherms better than the Langmuir model, with a maximum adsorption capacity of 6.7 mg/g at 30 °C and pH 7–8. Kinetic studies proved fast kinetics and equilibrium were attained in 6 min, while thermodynamic studies showed an exothermic (Δ Ho= - 17.52 kJ/ mol) , spontaneous reaction Δ Go< 0 at all temperatures), and increased randomness Δ So= + 24.27 J/ mol. K) at the interaction interface. Column studies revealed that although Lewatit TP 260 resin showed higher sorption capacity, its desorption efficiency (50.42%) was lower than that of FOB (99.9%), and the degree of column utilization of FOB (56.81%) was better than Lewatit TP 260 resin’s (16.0%). The findings were encouraging in the successful synthesis of a promising biosorbent from an abundant waste in Turkey for use in sustainable lithium recovery from aqueous sources. Graphical abstract: [Figure not available: see fulltext.]Article Citation - WoS: 31Citation - Scopus: 38Liquefaction of Waste Hazelnut Shell by Using Sub- and Supercritical Solvents as a Reaction Medium(Elsevier, 2019) Demirkaya, Emre; Dal, Orkan; Yüksel, AslıDirect thermochemical biomass degradation to obtain bio-oil by using organic solvents is not a new process type, and it has some advantages over hydrothermal liquefaction technique. However, up to our best knowledge, in this study, hazelnut shell decomposition by using ethanol, acetone and their mixtures at sub/supercritical conditions was studied for the first time in literature. Experiments were carried out between 220-300 degrees C, at three different reaction times (30, 60 and 90 min) for five different solvent ratios. Highest solid conversion achieved at 300 degrees C by using pure ethanol was 64.2%, whereas highest bio-oil yield was found as 44.2% at 300 degrees C with 50/50 (EtOH/Ac: v/v). Ethanol and acetone showed different characteristics during the reactions and their effects on the conversion and bio-oil yield were discussed. Statistical analysis showed that time, temperature, ratio and synergy between temperature-time were affecting parameters for the conversion and bio-oil yield. (C) 2019 Elsevier B.V. All rights reserved.