Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
10 results
Search Results
Article Citation - WoS: 1Citation - Scopus: 1Fabrication of Electrospun Polycaprolactone Nanofibrous Mats Loaded With Purple Basil Extract (Ocimum Basilicum L.) as Colorimetric Ph Indicator Films(Springer, 2025) Erez, Elif; Eroglu, Ahmet Emin; Bayramoglu, BesteIntelligent packaging with colorimetric pH indicators revolutionizes traditional food packaging by enabling real-time food quality monitoring. This study used electrospinning to develop pH indicator films from polycaprolactone (PCL) incorporating purple basil extract (PBE). Nanofibrous films containing 0.2% PBE (PCLN_0.2PBE), 0.4% PBE (PCLN_0.4PBE), and 0.6% PBE (PCLN_0.6PBE) were fabricated using different electrospinning conditions. The PCLNs fabricated with a voltage of 20 kV and a flow rate of 1.6 mL/h exhibited the most uniform and bead-free morphology according to scanning electron microscopy. The chemical, thermal, mechanical, and wetting characterization of the films was performed by Fourier transform infrared spectroscopy, differential scanning calorimetry, thermal gravimetric analysis, texture analysis, and contact angle analysis, respectively. Both PCLN_0.4PBE and PCLN_0.6PBE films displayed fast (4-5 s) and clear color transitions (Delta E > 3.5) to successive pH buffers within the range critical for food deterioration, while they exhibited excellent color changes (Delta E > 5) for pH variations of at least two units. The PCLN_0.6 PBE film displayed a Delta E of similar to 5 in only 5 min of exposure to ammonia vapor, whereas PCLN_0.4PBE showed a similar color change for over 15 min. The interaction between the films and acidic and alkaline semi-solid foods was simulated using gelatin gels at pH 2.5 and 11, respectively. Both films displayed significant color transitions (Delta E > similar to 9) within 15 min of contact with the gels, with the response from PCLN_0.6 PBE being more pronounced. The color stability in both films was maintained for up to 14 days at 4 degrees C, offering potential early warnings against food spoilage. PBE release was evaluated against different food simulants. The highest release occurred in 50% ethanol; the films demonstrated resistance to 3% acetic acid. The findings indicate that electrospun PCL films integrated with PBE have a promising potential to serve as colorimetric pH indicators for monitoring the freshness of food products.Book Part Citation - Scopus: 1A Recycling Route of Plastics Via Electrospinning: From Daily Wastes To Functional Fibers(Walter de Gruyter GmbH, 2019) Isık, Tuğba; Horzum,N.; Demir, Mustafa MuammerSince large-scale plastic production has begun in the 1940s, plastics have been produced and used globally, bringing many advantages to modern life. The consumption of plastics has increased exponentially due to their low cost, chemical resistance, lightness, durability and ability to combine with other materials. However, plastic materials represent high tonnage in urban wastes, and it is known that these plastics discarded at the end of their useful life by filling the landfill sites. Electrospinning is a well-established and versatile technique for the fabrication of submicron fibers. In addition, it is a promising approach for the recycling of waste polymers without using complex methodologies. In this chapter, utilization of electrospinning approach for the recycling of daily wastes will be discussed. The literature about the daily wastes of both synthetic materials and natural/agricultural materials will be analyzed, and the applications of these materials will be given in detail. © 2019 Walter de Gruyter GmbH, Berlin/Boston. All rights reserved.Article Citation - WoS: 4Citation - Scopus: 4Novel Electrospun-Based Extractive Probes for Rapid Determination of Clinically Important Compounds in Human Plasma(Elsevier B.V., 2024) Temel,E.R.; Eroğlu,A.E.; Salih,B.; Boyaci,E.Background: Coated blade spray (CBS) represents an innovative approach that utilizes solid-phase microextraction principles for sampling and sample preparation. When combined with ambient mass spectrometry (MS), it can also serve as an electrospray ionization source. Therefore, it became a promising tool in analytical applications as it can significantly reduce the analysis time. However, the current CBS coatings are based on the immobilization of extractive particles in bulk polymeric glue, which constrains the diffusion of the analytes to reach the extractive phase; therefore, the full reward of the system cannot be taken at pre-equilibrium. This has sparked the notion of developing new CBS probes that exhibit enhanced kinetics. Results: With this aim, to generate a new extractive phase with improved extraction kinetics, poly(divinylbenzene) (PDVB) nanoparticles were synthesized by mini-emulsion polymerization and then immobilized into sub-micrometer (in diameter) sized polyacrylonitrile fibers which were obtained by electrospinning method. Following the optimization and characterization studies, the electrospun-coated blades were used to determine cholesterol, testosterone, and progesterone in plasma spots using the CBS-MS approach. For testosterone and progesterone, 10 ng mL−1 limits of quantification could be obtained, which was 200 ng mL−1 for cholesterol in spot-sized samples without including any pre-treatment steps to samples prior to extraction. Significance: The comparison of the initial kinetics for dip-coated and electrospun-coated CBS probes proved that the electrospinning process could enhance the extraction kinetics; therefore, it can be used for more sensitive analyses. The total analysis time with this method, from sample preparation to instrumental analysis, takes only 7 min, which suggests that the new probes are promising for fast diagnostic applications. © 2024 Elsevier B.V.Article Citation - WoS: 7Citation - Scopus: 7Improving Mechanical Behavior of Adhesively Bonded Composite Joints by Incorporating Reduced Graphene Oxide Added Polyamide 6,6 Electrospun Nanofibers(Elsevier Sci Ltd, 2024) Yeke, Melisa; Barisik, Murat; Tanoglu, Metin; Ulas, M. Erdal; Nuhogu, Kaan; Esenoglu, Gozde; Iris, M. ErdemAdhesive joining of fiber-reinforced polymer (FRP) composites requires adequate interface tailoring and careful surface preparation to obtain a strong bond between components. This study aimed to improve the mechanical performance of adhesively bonded unidirectional carbon fiber-based (CFRP) composite parts by modifying joint surfaces with graphene-added electrospun Polyamide 6,6 (PA66) nanofibers. Reduced graphene oxide (rGO) was dispersed at 10 % wt/v PA66 solution at three different concentrations below rGO saturation limits. Bead-free nanofibers with homogenous graphene distribution were obtained on a prepreg by electrospinning. Addition of up to 2 % rGO yielded complete dispersion through the nanofiber network while the higher values created local agglomerations. Surface wetting experiments showed conversion of slightly hydrophobic surfaces to complete hydrophilic with electrospun nanofiber coating and the lowest contact angle was obtained at 2 % wt/v rGO addition (26.18 degrees +/- 2.03 degrees). Composite plates were produced in a hot press keeping the modified prepregs on top. Plates with different surface treatments joined by secondary bonding using 3 plies of FM 300 K film adhesive. Mechanical properties of adhesively bonded composites were tested by Single lap joint and Charpy impact tests. We achieved an 18 % increase in shear strength and 31 % increase in impact strength by adding 2 % wt/v ratio rGO into PA66 electrospun nanofiber.Review Citation - WoS: 5Citation - Scopus: 5Development and Functionalization of Electrospun Fiber Coated Thin Film Microextraction Devices for Rapid Mass Spectrometric Determination of Biologically Important Polar Molecules(Elsevier B.V., 2024) Öztürk,M.; Salih,B.; Eroğlu,A.E.; Boyaci,E.Rapid diagnosis of diseases is one of the challenging areas in clinical research. From the analytical chemist's perspective, the main challenges are isolating the compounds from the bio-specimen and lengthy analysis times. In this regard, solid phase microextraction offers a platform to address the abovementioned challenges. Moreover, its sharp tip-thin film geometry, known as coated blade spray (CBS), can enhance the extraction and act as an ionization source in direct mass spectrometric analysis. In this study, a new CBS device specifically designed for polar analytes was prepared and optimized to determine urinary metabolites. For this purpose, polyacrylonitrile (PAN) was selected as a base polymer as it can be electrospun to form a nanofibrous structure, and it can be modified with weak ion exchange moieties to interact with polar analytes. Following the electrospinning of PAN, hydrolysis was optimized, and conditions leading to sufficient extraction enhancement without dissolving the polymer were obtained when probes were treated with 5.0 M of NaOH for 2.5 h. Using the coated blades prepared as explained, the evaluation of various extraction conditions showed that 5 min is sufficient for equilibrium extraction. In addition, the solution's ionic strength and pH significantly affect the extraction. Optimum sorption was obtained at no salt added and pH 7.0 conditions. The CBS-MS optimization showed that 10.0 µL of ACN/MeOH/H2O (40:40:20, v/v/v) with formic acid kept for 15 seconds on the blade before voltage application leads to the highest signal. The limits of quantification of the analytes are between 50 and 100 ng/mL. © 2024 Elsevier B.V.Article Citation - WoS: 1Citation - Scopus: 1Fabrication and in Vitro Evaluation of Thermally Cross-Linked Gelatin Nanofibers for Drug Delivery Applications(Taylor & Francis, 2022) Mete, Derya; Göktaş, Gözde; Şanlı Mohamed, GülşahIn this study, four different nanofibers consisting of gelatin (Gel), doxorubicin (DOX) with gel (DOX@Gel), a composite of gel with poly(ethylene glycol) (PEGylated-gel), and DOX@PEGylated-gel were fabricated. Subsequently, the nanofibers were thermally cross-linked in order to offer a stable and biocompatible alternative for the biological applications of nanofibers such as drug delivery and tissue engineering. Nanofibers were characterized by scanning electron microscopy, Fourier Transform-Infrared Spectroscopy (FT-IR), and confocal microscopy. The formation of smooth, continuous, and uniform nanofibers was observed and the addition of PEG resulted in an increase whereas the incorporation of DOX into nanofibers had no significant change in the diameter of nanofibers. Crosslinking also enlarged the diameter of all nanofibers and the most dramatic increase was observed 53% by DOX@PEGylated-gel. Afterward, the biological performance of the nanofibers was investigated by drug release profile, cytotoxicity on A549 cell line as well as antimicrobial activity with E. coli and S. aureus. The results indicate an enhanced drug release profile, moderate antimicrobial activity, and reasonable cytotoxic efficiency for thermally cross-linked nanofibers compared to uncross-linked nanofibers.Article Citation - WoS: 27Citation - Scopus: 28Biocomposite Scaffolds for 3d Cell Culture: Propolis Enriched Polyvinyl Alcohol Nanofibers Favoring Cell Adhesion(John Wiley and Sons Inc., 2021) Bilginer, Rumeysa; Özkendir İnanç, Dilce; Yıldız, Ümit Hakan; Arslan Yıldız, AhuThe objective of this work is generation of propolis/polyvinyl alcohol (PVA) scaffold by electrospinning for 3D cell culture. Here, PVA used as co-spinning agent since propolis alone cannot be easily processed by electrospinning methodology. Propolis takes charge in maximizing biological aspect of scaffold to facilitate cell attachment and proliferation. Morphological analysis showed size of the electrospun nanofibers varied between 172-523 nm and 345-687 nm in diameter, for non-crosslinked and crosslinked scaffolds, respectively. Incorporation of propolis resulted in desired surface properties of hybrid matrix, where hybrid scaffolds highly favored protein adsorption. To examine cell compatibility, NIH-3T3 and HeLa cells were seeded on propolis/PVA hybrid scaffold. Results confirmed that integration of propolis supported cell adhesion and cell proliferation. Also, results indicated electrospun propolis/PVA hybrid scaffold provide suitable microenvironment for cell culturing. Therefore, developed hybrid scaffold could be considered as potential candidate for 3D cell culture and tissue engineering.Article Citation - WoS: 69Citation - Scopus: 77Novel Zein-Based Multilayer Wound Dressing Membranes With Controlled Release of Gentamicin(John Wiley and Sons Inc., 2019) Kimna, Ceren; Tamburacı, Sedef; Tıhmınlıoğlu, FundaRecently, functional multilayer scaffolds with controlled drug release ability come into prominence for wound healing applications to mimic the layered structure of skin tissue and prevent the possible infections at the defect site. In this study, controlled antibiotic releasing zein bilayer membranes were fabricated for treatment of acute skin infections. Gentamicin loaded fibers were prepared by electrospinning on the membrane surface. Membranes were characterized with scanning electron microscope, atomic force microscopy, Fourier transform infrared spectroscopy, contact angle, mechanical analysis, swelling, degradation, and water vapor permeability studies. In vitro cytotoxicity, cell attachment, and proliferation were investigated. Cell attachment on fiber layer was observed with fluorescence imaging. Fabricated fibers showed structural similarity to the skin tissue layers with a fiber diameter range of 350-425 nm and film thickness in the range of 311-361 mu m. Mechanical properties were found compatible with the skin tissue. In addition, membranes showed antimicrobial activity against Staphylococcus aureus and Escherichia coli. The sustained release was achieved with a cumulative release of 94%. Membranes did not show any cytotoxic effect. NIH/3T3 and HS2 cell lines were proliferated on each layer mimicking the multilayer skin tissue. Hence, zein-based bilayer membrane showed promising properties to be used as a potential antimicrobial wound dressing for skin tissue regeneration. (c) 2018 Wiley Periodicals, Inc.Article Citation - WoS: 21Citation - Scopus: 24Modification of Electrospun Pva/Paa Scaffolds by Cold Atmospheric Plasma: Alignment, Antibacterial Activity, and Biocompatibility(Springer Verlag, 2019) Arik, Nehir; İnan, Alper; İbiş, Fatma; Demirci, Emine A.; Karaman, Ozan; Ercan, Utku K.; Horzum, NesrinThe ongoing search for better antibacterial wound care dressings has led to the design and fabrication of advanced functional nanomaterials. Taking advantage of electrospinning and cold atmospheric plasma (CAP), free-standing nanofibrous scaffolds are promising for use in novel biomedical applications. Random and aligned polyvinyl alcohol (PVA)/polyacrylic acid (PAA) nanofiber scaffolds are fabricated by electrospinning and treated with CAP. In this study, we investigate the effects of CAP treatment on alignment, hydrophilicity, antibacterial activity, and biocompatibility in determining the surface properties of the nanofibrous scaffolds. The results of vibrational polarization spectroscopy analysis indicate that CAP treatment changes the degree of alignment of the nanofibers. Furthermore, both random and aligned CAP-treated nanofibrous scaffolds show significant antibacterial activity against the E. coli strain. The results of an in vitro scratch assay reveal that CAP treatment of PVA/PAA nanofibers has no toxic effect.Article Citation - WoS: 63Citation - Scopus: 65Amidoxime Functionalized Polymers of Intrinsic Microporosity (pim-1) Electrospun Ultrafine Fibers for Rapid Removal of Uranyl Ions From Water(Elsevier Ltd., 2019) Satılmış, Bekir; Isık, Tuğba; Demir, Mustafa Muammer; Uyar, TamerThe Polymers of Intrinsic Microporosity (PIM-1) is considered as one of the most promising polymer candidates for adsorption applications owing to its high surface area and the ability to tailor the functionality for the targeted species. This study reports a facile method for the preparation of amidoxime functionalized PIM-1 fibrous membrane (AF-PIM-FM) by electrospinning technique and its practical use for the extraction of U(VI) ions from aqueous systems via column sorption under continuous flow. Fibrous membrane form of amidoxime functionalized PIM-1 (AF-PIM-FM) was prepared by electrospinning method owing to its excellent processability in dimethylformamide. Bead-free and uniform fibers were obtained as confirmed by SEM imaging and average fiber diameter was 1.69 +/- 0.34 mu m for AF-PIM-FM. In addition, electrospun PIM-1 fibrous membrane (PIM-FM) was prepared as a control group. Structural and thermal characterization of powder and membrane forms of the materials were performed using FT-IR, H-1 NMR, XPS, Elemental analyses, TGA, and DSC. The porosity of the samples was measured by N-2 sorption isotherms confirming amidoxime PIM-1 still maintain their porosity after functionalization. Amidoxime functionality along with membrane structure makes AF-PIM-FM a promising material for uranyl adsorption. First, a comparison between powder and membrane form of amidoxime functionalized PIM-1 was investigated using batch adsorption process. Although membrane form has shown slightly lower adsorption performance in the batch adsorption process, the advantage of using the membrane in column adsorption processes makes membrane form more feasible for real applications. In addition, amidoxime modification enhanced the uranium adsorption ability of PIM-FM up to 20 times. The effect of initial concentration and pH were investigated along with regeneration of the adsorbents. AF-PIM-FM was successfully used for five adsorption-desorption cycles without having any damage on the fibrous structure.