Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
7 results
Search Results
Article Citation - WoS: 4Citation - Scopus: 4Determining Water and Sediment Quality Related To Lead-Zinc Mining Activity(Polish Academy of Sciences, 2018) Şanlıyüksel Yücel, Deniz; Baba, AlperThis study focuses on the Koru and Tesbihdere Pb-Zn mining districts, located at the upstream areas of the Umurbey dam basin. Mining activities in Koru, one of the longest operated mines in NW Turkey, date back to the beginning of the 1900s. The purpose of the study is to (1) determine the hydrochemical properties of the water resources and to assess the potential environmental consequences of mining activities in the Koru and Tesbihdere mining districts, and (2) investigate the effects caused by mining activities on the water resources and sediment quality in the Umurbey dam basin. Concentrations of As, Cd, Cu, Fe, Mn, Pb, and Zn in river sediments downstream of the Tesbihdere and Koru mining district, and in the Umurbey dam sediments were higher than the world average for river sediments. The geoaccumulation index and enrichment factor revealed that sediments were strongly polluted with Pb and Zn, moderately to strongly polluted with Cd and moderately polluted with Cu. The chemical analyses of water resources revealed that the maximum Fe, Zn, Pb, Mn, and Cu concentrations reached 2890 μg/l, 1785 μg/l, 1180 μg/l, 984 μg/l, and 419 μg/l, respectively. The Koru River is classified as polluted water according to Turkish inland water quality regulations. The environmental contamination problems in the local drainage system are caused by leakage from past and current tailing ponds into the Koru River.Article Citation - WoS: 10Citation - Scopus: 11Some Exact and Explicit Solutions for Nonlinear Schrödinger Equations(Polish Academy of Sciences, 2013) Aslan, İsmailNonlinear models occur in many areas of applied physical sciences. This paper presents the first integral method to carry out the integration of Schrödinger-type equations in terms of traveling wave solutions. Through the established first integrals, exact traveling wave solutions are obtained under some parameter conditions.Article Citation - WoS: 3Citation - Scopus: 4Electrical Characterization of Interdigitated Humidity Sensors Based on Cnt Modified Calixarene Molecules(Polish Academy of Sciences, 2013) Özbek, Cebrail; Çulcular, Evren; Okur, Salih; Yılmaz, M.; Kurt, M.In this study, we report on the optimization and characterization of chloroform soluble calix[4]arene derivative as a humidity sensor based on electrical properties. Due to the fact that calix[4]arene molecules are nonconductive, we modified the calix[4]arene molecules with carbon nanotubes with electrostatic bond in order to increase the conductance of calix[4]arene molecule (5,11,17,23-tetra-ter-butyl-25,27-dehydrazinamidcarbonilmetoxy-26,28- -dehydroxy-kalix[4]aren). Using photolithography technique, we fabricated interdigitated gold electrodes with 3 micrometers separation to investigate the electrical properties of carbon nanotubes modified calix[4]arene molecule where we used dropcast method to form a thin film of carbon nanotubes modified calix[4]arene molecule on the gold electrodes. Our reproducible experimental results indicated that the chloroform soluble carbon nanotubes modified calix[4]arene films have great potential for humidity sensing applications at room temperature operations.Article Citation - WoS: 3Citation - Scopus: 4Electrical Characterizations of Schottky Diodes on Ito Modified by Aromatic Sams(Polish Academy of Sciences, 2013) Havare, A. Kemal; Okur, Salih; Yağmurcukardeş, Nesli; Can, M.; Aydın, H.; Şeker, M.; Demiç, ŞerafettinIn order to understand the electronic properties of the organic Schottky diode, ITO/TPD/Al and ITO/SAM/ TPD/Al organic Schottky devices were fabricated to obtain currentffvoltage characteristics. From the slopes and y-axis intercepts of the plots, the values of the ideality factor, barrier heights of the ITO/SAM/TPD/Al diode were determined as 2.03 and 0.56 eV, respectively. The surface characterizations of modified and unmodified ITO were performed via atomic force microscopy.Article Citation - WoS: 1Citation - Scopus: 1Improvement of Anode/Htl Interface Properties Using Self-Assembled Monolayer in Organic Electronic Devices(Polish Academy of Sciences, 2013) Yaman, M.; Yağmurcukardeş, Nesli; Havare, A. Kemal; Aydın, H.; Ocakoğlu, Kasım; Okur, SalihFabrication and characterization of highly effcient organic light-emitting diode with surface modification of indium tin oxide anodes by using self-assembled monolayer technique have been studied. Four different self-assembled molecules, K-28 ruthenium complex, octadecylamine hydrochloride, octadecyltrichlorosilane and mercaptohexdecanoic acid are used to modify ITO surface to improve the interface properties. Space charge limited currents measurements have been used to evaluate carrier mobility under steady state current. The results show that the surface properties such as the stability of ITO anode layer have significant effects on charge injection in organic light-emitting diode devices.Conference Object Citation - WoS: 18Citation - Scopus: 21Gas Sensing Properties of Carbon Nanotubes Modified With Calixarene Molecules Measured by Qcm Techniques(Polish Academy of Sciences, 2012) Mermer, Ömer; Okur, Salih; Sümer, F.; Özbek, Cebrail; Sayın, S.; Yılmaz, MustafaThis study focuses on the characterization and optimization of calixarene modified carbon nanotube thin films for gas detection. Calixarene molecules were synthesized individually by considering their functional groups to attract the gas. Calixarene modified carbon nanotube based sensors were fabricated using drop-casting method on a quartz crystal microbalance gold electrode. Carbon monoxide, carbondioxide, oxygen and dry air were used as active gases for adsorption process, while high-purity nitrogen gas was used for desorption process. The selectivity and sensitivity of calixarene modified carbon nanotube are investigated in detail. Our experimental results show that functional calixarene modified carbon nanotube coated quartz crystal microbalance sensors are very sensitive and selective to gas of CO 2 at room temperature operation.Conference Object Citation - WoS: 6Citation - Scopus: 11Odor Adsorption Kinetics on Modified Textile Materials Using Quartz Microbalance Technique(Polish Academy of Sciences, 2012) Sarıışık, Merih; Okur, Salih; Asma, Ş.In this study, a functional product with aromatic oil and vitamins for use at aromatherapy and spa centers or personal care has been designed to improve life quality of users by using multifunctional products with good odor, moisturizing, relaxation, anti-aging effects. For this purpose, commercial berry berry oil was capsulated in β-cyclodextrin, and then applied to 100% cotton towel fabric. Quartz crystal microbalance sensors were used to investigate odor adsorption kinetics on modified textile materials for the first time. The frequency responses vs. time plot shows clear linear step responses to the change in the concentration of odor molecules coming from the container filled with berry berry applied textile. The results also reveal that TiO 2 coated quartz crystal microbalance sensors can be used as e-nose to sense odor from textile coated with berry berry oil containing β-cyclodextrin capsules.