Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
4 results
Search Results
Article Citation - WoS: 28Citation - Scopus: 29Characteristics of Bricks Used in the Domes of Some Historic Bath Buildings(Elsevier Ltd., 2013) Uğurlu Sağın, Elif; Böke, HasanIn this study, characteristics of bricks used in the domes of some historic bath buildings dated to 15th century in Izmir were determined in order to indicate the properties of repair bricks that will be used in the conservation works of the domes. For this purpose, their basic physical properties, elemental and mineralogical compositions, firing temperatures and microstructural properties were determined by using XRF, XRD, SEM-EDS and TGA analysis. Analysis results indicated that the bricks are of low density, high porosity and were produced from raw materials containing low amounts of calcium poor clays fired at low temperatures (<. 900. °C). They are mainly consisted of small pores with r<. 5. μm that make the bricks more susceptible to salt crystallization and freeze-thaw cycles. Although the bricks were fired at low temperatures and susceptible to salt crystallization and freeze thaw cycles, the structural systems of the domes remained without losing their integrity due to the moderate climatic conditions of Izmir. Repair bricks that will be used in the conservation works of the domes should be compatible with the original ones and produced from calcium poor clays by firing at low temperatures.Article Citation - WoS: 75Citation - Scopus: 87Use of Spent Foundry Sand and Fly Ash for the Development of Green Self-Consolidating Concrete(Springer Verlag, 2011) Şahmaran, Mustafa; Lachemi, Mohamed; Erdem, Tahir Kemal; Yücel, Hasan ErhanIn the United States alone, the foundry industry discards up to 10 million tons of sand each year, offering up a plentiful potential resource to replace sand in concrete products. However, because the use of spent foundry sand (SFS) is currently very limited in the concrete industry, this study investigates whether SFS can successfully be used as a sand replacement material in cost-effective, green, self-consolidating concrete (SCC). In the study, SCC mixtures were developed to be even more inexpensive and environmentally friendly by incorporating Portland cement with fly ash (FA). Tests done on SCC mixtures to determine fresh properties (slump flow diameter, slump flow time, V-funnel flow time, yield stress, and relative viscosity), compressive strength, drying shrinkage and transport properties (rapid chloride permeability and volume of permeable pores) show that replacing up to 100% of sand with SFS and up to 70% Portland cement with FA enables the manufacture of green, lower cost SCC mixtures with proper fresh, mechanical and durability properties. The beneficial effects of FA compensate for some possible detrimental effects of SFS.Article Citation - WoS: 50Citation - Scopus: 51The Use of Brick-Lime Plasters and Their Relevance To Climatic Conditions of Historic Bath Buildings(Elsevier Ltd., 2009) Uğurlu Sağın, Elif; Böke, HasanBrick-lime mortars and plasters have been widely used as water-proof materials in aqueducts, bridges and cisterns since early Hellenistic time. In this study, the characteristics of brick-lime plasters used in some Ottoman bath buildings were investigated in order to understand their relevance as plasters in hot and humid environmental conditions of the baths. For this purpose, basic physical properties, raw material compositions, mineralogical, microstructural and hydraulic properties of brick-lime plasters of some historic bath buildings in İzmir (Turkey) were determined by XRD, SEM-EDX, AFM and chemical analyses. The results indicated that their survival without loosing their strength and adhesion in hot and humid conditions of the baths was explained by their hydraulic characters due to the consciously use of porous and pozzolanic crushed bricks as aggregate in the manufacturing of plasters.Article Citation - WoS: 20Citation - Scopus: 23Opal-A Rich Additives Used in Ancient Lime Mortars(Elsevier Ltd., 2006) Tunçoku, Selim Sarp; Caner Saltık, Emine N.Ancient stone and brick masonry mortars from three monuments in Konya, Central Anatolia dated to the Anatolian Selçuk Period (12th and 13th centuries AD) were examined for their raw material composition and durability characteristics to understand some characteristics of medieval mortar technology. Optical microscopy, XRD, SEM, EDX, FTIR and TGA analyses revealed that the mortars contained high percentage of lime binder totally carbonated into micritic calcite. Coarse and medium aggregates were mainly composed of sandstone and metamorphic rock fragments, quartz, feldspar and mica minerals. Opal-A was found in considerable amounts in the fine aggregates, likely not derived from the coarser ones but added separately. Pozzolanic activity of the fine aggregates was determined by conductometric measurements. Their ability to form C-S-H was observed by treating them with saturated Ca(OH)2 solution. Bulk density and total porosity measurements showed that the mortars were highly porous due to the use of high amount of lime. On the other hand, they possessed sufficient mechanical strength. Mechanical properties were determined by point load tests and ultrasonic pulse velocity measurements. They were expressed as uniaxial compressive strength (UCS) and modulus of elasticity (Emod) in MPa. The results were also discussed in terms of durability characteristics of the mortars. They were expressed with the use of uniaxial compressive strengths in dry and wet states, and total porosity values. The mortars were considered to have high durability to wetting and drying cycles but had poor durability to the crystallization of water-soluble salts.