Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
10 results
Search Results
Now showing 1 - 10 of 10
Article Citation - WoS: 40Citation - Scopus: 47Boron in Geothermal Energy: Sources, Environmental Impacts, and Management in Geothermal Fluid(Elsevier, 2022) Mott, A.; Baba, Alper; Hadi Mosleh, Mojgan; Ökten, Hatice Eser; Babaei, Masoud; Gören, Ayşegül Yağmur; Feng, C.; Recepoğlu, Yaşar Kemal; Uzelli, Taygun; Uytun, Hüseyin; Morata, Diego; Yüksel Özşen, AslıThe problem of hazardous chemicals in geothermal fluid is a critical environmental concern in geothermal energy developments. Boron is among the hazardous contaminants reported to be present at high concentrations in geothermal fluids in various countries. Poor management and inadequate treatment of geothermal fluids can release excessive boron to the environment that has toxic effects on plants, humans, and animals. Despite the importance of boron management in geothermal fluid, limited and fragmented resources exist that provide a comprehensive understanding of its sources, transport and fate, and the treatment strategies in geothermal energy context. This paper presents the first critical review from a systematic and comprehensive review on different aspects of boron in geothermal fluid including its generation, sources, toxicity, ranges and the management approaches and treatment technologies. Our research highlights the origin of boron in geothermal water to be mainly from historical water-rock interactions and magmatic intrusion. Excessive concentrations of boron in geothermal fluids have been reported (over 500 mg/L in some case studies). Our review indicated that possible boron contamination in geothermal sites are mostly due to flawed construction of production/re-injection wells and uncontrolled discharge of geothermal water to surface water. The dominancy of non-ionic H3BO3 species makes the selection of the suitable treatment method for geothermal waters limited. Combining boron selective resins and membrane technologies, hybrid systems have provided effluents suitable for irrigation. However, their high energy consumption and course structure of boron selective resins encourage further research to develop cost-effective and environmentally friendly alternatives.Conference Object Citation - Scopus: 2Importance of Load Based Automatic Control in Geothermal Energy Systems(Elsevier, 2003) Şener, Adil Caner; Toksoy, Macit; Aksoy, NiyaziGeothermal energy production is not possible without use of electricity, since electricity is needed to pump geothermal fluid from underground to consumption point. The biggest portion of the operating cost in geothermal district heating systems comes from pumping energy consumption. In ibis study Balcova-Narhdere geothermal district heating system has been analysed and the optimum control strategies minimising the energy consumption in the system discussed. Then decisive factors in the efficient control and operation of geothermal healing systems have been studied. Finally fundamental automation requirements for efficient operation of geothermal district heating systems has been introduced. Copyright © 2003 IFAC.Article Citation - WoS: 33Citation - Scopus: 42Thermodynamic Assessment of Downhole Heat Exchangers for Geothermal Power Generation(Elsevier, 2019) Yıldırım, Nurdan; Parmanto, Slamet; Akkurt, Gülden GökçenDownhole heat exchanger is a device to extract heat from geothermal fluid. While it is widely used for heating purposes, its use for power generation has not been reported. The aim of this study is to examine the feasibility of power generation from a 2500 m deep existing geothermal well with high temperature gradient and insufficient flowrate by using a downhole heat exchanger. For this purpose, a thermodynamic and an economic evaluation model are developed by the use of Engineering Equation Solver software. Additionally, the parametric studies have been carried out to identify the effects of insulation, geothermal well conditions, geometry of downhole heat exchanger, mass flowrate and type of working fluids on the performance of downhole heat exchanger system. Consequently, work output of the best alternative is computed as 2511 kW(e) with 64 kg/s mass flowrate of R-134a for 2500 m-deep downhole heat exchanger having inner pipe diameter of 0.127 m. Electricity generation cost and simple payback time are calculated as 46 $/MWh and 2.25 years, respectively. The obtained results showed that the downhole heat exchanger system can be a feasible alternative for wells with very low geothermal flowrate to generate power. (C) 2019 Elsevier Ltd. All rights reserved.Article Citation - WoS: 13Citation - Scopus: 16The Injection of Co2 To Hypersaline Geothermal Brine: a Case Study for Tuzla Region(Elsevier Ltd., 2019) Topçu, Gökhan; Koç, Gonca A.; Baba, Alper; Demir, Mustafa MuammerScaling is a serious issue for geothermal power plants since it remarkably decreases the harvesting of energy. The reduction of pH by organic acids whose structure is close to CO2 for instance formic acid has been an effective solution for the minimization of scaling. Herein, the effect of CO2 injection on the formation of scaling particularly metal-silicates was investigated for the model case of Tuzla Geothermal Field (TGF) located in the northwest of Turkey. CO2 has an acidic character in aqueous systems because it leads to the formation of carbonic acid. The injection of 20.6 m3/s CO2 (approximately 88 ppm) to hypersaline brine of TGF is a promising green approach for both mitigation of scaling by reducing pH from 7.2 to 6.2 at the well-head and the minimization of potential corrosion compared to the use of formic acid (55 ppm).Book Part Citation - Scopus: 11Thermodynamic Performance Evaluation of a Geothermal Drying System(Springer Verlag, 2014) Helvacı, Hüseyin Utku; Gökçen Akkurt, GüldenRenewable energy sources such as geothermal energy can be used in drying processes as a heat source due to the high energy costs of fossil fuels. In this study, geothermal cabinet type dryer was constructed and situated in Balcova-Narlidere Geothermal Field, Turkey where the clean city water of district heating system is used as an energy source for the dryer. The dryer was tested on site for drying of olive leaves and energy and exergy analyses of the drying process conducted under two cases: Case 1. Exhaust air was rejected to the environment. Case 2. A portion of exhaust air was re-circulated. Energy Utilization Ratio (EUR) was determined as 7.96 for Case 1 and 50.36 for Case 2. The highest rate of exergy destruction occurred in the fan, followed by heat exchanger and the dryer, accounting for 0.2913, 0.05663 and 0.0115 kW, respectively. Exergetic efficiency of the drying chamber was calculated as 89.66 %. Re-circulating the exhaust air decreased the exergy value at the outlet of the dryer from 0.1013 to 0.08104 kW, indicating that re-using the air increases the performance of the dyer.Article Citation - WoS: 14Citation - Scopus: 2Climate Change Mitigation With Renewable Energy: Geothermal(Springer Verlag, 2011) Baba, AlperOn a global scale, there is increasing evidence that climate is changing and of a discernible human influence. Many of scientists are confident that if current emissions of greenhouse gases continue, the world will be warmer, sea levels will rise and regional climate patterns will change. According to some scientist, global temperatures are expected to rise faster over the next century than over any time during the last 10,000 years. From this token, geothermal energy is now considered to be one of the most important alternative energy sources to minimize climate change. Geothermal technologies for power generation or direct use operate with little or no greenhouse gas emissions. Geothermal energy is generally accepted as being an environmentally-friendly energy source, particularly when compared to fossil fuel energy sources. Geothermal resources have long been used for direct heat extraction for district urban heating, industrial processing, domestic water and space heating, leisure and balneotherapy applications. Geothermal energy is used in more than 80 countries for direct heat application and 24 countries for power generation. Re-injection of fluids maintains a constant pressure in the reservoir, thus increasing the field's life and reducing concerns about environmental impacts. Geothermal energy has several significant characteristics that make it suitable for climate change mitigation.Article Citation - Scopus: 19Application of Geothermal Energy and Its Environmental Problems in Turkey(Inderscience Enterprises Ltd., 2015) Baba, AlperHuman beings have been benefiting from geothermal energy for different uses since the dawn of the civilisation in many parts of the world. One of the earliest uses of geothermal energy was for heating and it was used extensively by Romans in Turkey. The Aegean region is favoured by a large number of thermal springs known since ancient times. However, it was first in the 20th century that geothermal energy was used on a large scale for direct use and electricity generation. The country's installed heat capacity is 2,705 MWt for direct use and 322.39 MWe for power production. In parallel to developing geothermal energy applications in Turkey, many sites are now experiencing problems such as water contamination associated with geothermal fluid. Especially, the high temperature solution of elements and compounds, causes operational limitations in geothermal power plants. These limitations are due to the severe scaling and corrosion of geothermal fluid. Copyright © 2015 Inderscience Enterprises Ltd.Article Citation - WoS: 25Citation - Scopus: 32District Heating System Design for a University Campus(Elsevier Ltd., 2006) Yıldırım, Nurdan; Toksoy, Macit; Gökçen Akkurt, Güldenİzmir Institute of Technology campus is in use since 2000 and still under development. At present, heating is provided by individual fuel boilers. On the other hand, the campus has a geothermal resource in its borders with a temperature of 33 °C. Because of this low geothermal fluid temperature; heat pump district heating system is considered for the campus. As an alternative, fuel boiler district heating system is studied. Each heating system is simulated using hourly outdoor temperature data. For the simulations, a control system with constant flow rate and variable return water temperature is used and the main control parameter is the indoor temperature. Various heating regime alternatives have been studied for heat pump district heating system for the various condenser outlet temperature and geothermal fluid flow rate, and two of these alternatives are given in this study. Furthermore, economic analysis has also been done for each heating system alternative based on investment and operational costs. Results indicate that heat pump district heating system has the highest investment but lowest operational cost. The alternatives are evaluated according to internal rate of return method, which shows the profit of the investment and resulted that, the heat pump district heating system has minimum 3.02% profit comparing with the fuel boiler district heating system at the end of the 20-year period.Article Citation - WoS: 30Citation - Scopus: 36Overview of Kizildere Geothermal Power Plant in Turkey(Elsevier Ltd., 2004) Gökçen Akkurt, Gülden; Öztürk, Harun Kemal; Hepbaşlı, ArifAchieving sustainable development is a target that is now widely seen as important in worldwide public opinion. In this context, the utilization of renewable energy resources such as solar, geothermal and wind energy appears to be one of the most efficient and effective ways of achieving this target. Recently, power generation from geothermal energy has become of big importance in Turkey, which is located on the Mediterranean sector of the Alpine-Himalayan Tectonic Belt and is among the first seven countries in abundance of geothermal resources around the world. The main objective in doing the present study is twofold, namely: (a) to investigate Turkey's geothermal energy potential for power generation and (b) to overview the Denizli-Kizildere geothermal power plant (DKGPP) with an installed capacity of 20.4 MWe, which is at present the only operating geothermal power plant of Turkey. Based on the drilling data, which have been gathered to date, Turkey's geothermal energy potential for power generation is determined to be 764.81 MWe. Electricity generation projections of Turkey are also 500 MWe from Germencik, Kizildere, Tuzla and several of the other fields by the year 2010 and 1000 MWe by 2020. The Denizli-Kizildere geothermal field has an estimated capacity of 200 MWe. The DKGPP was put into operation in 1984 and has been operated since then. It produced an electrical energy of 89,597 MWh in 2001, representing an electric power of 10.6 MWe in the same year. Present applications have shown that in Turkey, geothermal energy is a promising alternative and can make a significant contribution towards reducing the emission of greenhouse gases. As the public recognizes the projects, the progress will continue.Article Citation - WoS: 15Citation - Scopus: 16Geothermal Fields Suitable for Power Generation(Taylor and Francis Ltd., 2004) Gökçen Akkurt, Gülden; Öztürk, Harun Kemal; Hepbaşlı, ArifTurkey is located on the Mediterranean sector of Alpine-Himalayan Tectonic Belt with many grabens, acidic volcanism, hydrothermal alteration zones, numerous hot springs and fumaroles. The data gathered since 1962 indicate that Turkey has a high geothermal energy potential. By comparison, it is among the first seven countries in abundance of geothermal resources around the world, while the share of its potential used is only about 2%. This means that considerable studies on geothermal energy could be conducted in order to increase energy supply and to reduce atmospheric pollution in Turkey. The main objective of the present study is threefold, namely: (1) to overview Turkey's geothermal fields suitable for power generation together with their possible utilization opportunities, (2) to present problems encountered and research projects developed in the Denizli-Kizildere geothermal field with an estimated capacity of 200 MWe and (3) to assess the current status of geothermal energy use for electric energy production in Turkey. The Denizli-Kizildere geothermal power plant with an installed capacity of 20.4 MWe which is, at present, the only operating geothermal power plant of Turkey, was put into operation in 1984, while electricity from geothermal energy has been produced commercially since 1913. This plant produced on average an electrical energy of 84,920 MWh in the period between 1998-2001, representing an average electric power of 10.45 MWe in the same period. Parallel to the development of the geothermal energy utilization in the country, it is projected that, by the years 2010 and 2020, the total geothermal power installed capacity will increase to 500 MWe, respectively.