Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
67 results
Search Results
Now showing 1 - 10 of 67
Article Citation - WoS: 8Citation - Scopus: 6Effect of external electric field on fluidization of rodlike particles using CFD-DEM(American Chemical Society, 2024) Kazemi, Saman; Aali, Hamed; Larijani, Roxana Saghafian; Zarghami, Reza; Liu, Helei; Mostoufi, NavidGiven the significant impact of an external electric field on fluidized bed hydrodynamics and the practical importance of rodlike particles, this study examines the behavior of a fluidized bed containing rodlike particles under various external electric fields. Simulations were performed using a coupled computational fluid dynamics-discrete element method, and rodlike particles were generated using a multisphere approach aided by quaternions. The effect of different vertical and horizontal external electric fields on the orientation of particles was investigated. Also, the effect of particle size on their orientation in the presence of constant vertical and horizontal external electric fields was explored in this work. The results showed that increasing the electric field strength and reducing the size of rodlike particles lead to an increment in the tendency of particles to become oriented along the direction of the electric field. Moreover, the effect of the external electric field at various inlet gas velocities on the probability distribution of the porosity in the bed was studied. Finally, the effect of vertical and horizontal electric fields on the bubble diameter was examined. This study offers a deeper understanding of the fluidization of rodlike particles in the presence of an electric field, and its findings can be applied to design and optimize related processes.Article Citation - WoS: 2Citation - Scopus: 2Exploring Noncentrifugal Sugar as a Partial Replacement for White Sugar in Low Methoxyl Pectin Confectionery Gels: Impacts on Physical and Rheological Properties(American Chemical Society, 2024) Fakhar, Hafiz Imran; Çavdaroğlu, Elif; Hayat, Muhammad Qasim; Janjua, Hussnain A.; Oztop, Mecit HalilNoncentrifugal sugar (NCS) is an unrefined, dark brown sugar containing minerals and plant secondary metabolites, unlike refined white sugar (WS). This study explored using NCS in confectionary jellies as an alternative sugar. We used different concentrations of NCS and WS to prepare low methoxyl pectin (LMP) confectionery gels characterized by their physical and rheological properties along with time-domain nuclear magnetic resonance (TD-NMR) relaxometry. The strongest LMP gel, with a hardness of 0.94 N, was achieved by substituting 25% of WS with NCS at a low CaCl2 concentration (0.075 M). Gels with up to 50% WS replaced by NCS showed comparable hardness to standard LMP gels made solely with WS at a 0.15 M CaCl2 concentration, attributed to NCS's unique constituents. The NCS-WS gel exhibited the shortest T2 values (139.8 ms) and self-diffusion coefficient values (4.99 x 10-10 m2/s), indicating a denser, more cross-linked structure that restricted water mobility. These findings suggest NCS's complex role in affecting LMP gels' chemical and physical properties, highlighting its potential as a partial WS replacement in LMP gelation-based products, with an additional source of minerals and antioxidants.Article Citation - WoS: 6Citation - Scopus: 6Weak Dependence of Voltage Amplification in a Semiconductor Channel on Strain State and Thickness of a Multidomain Ferroelectric in a Bilayer Gate(American Chemical Society, 2023) Misirlioglu, I.B.; Yapici, M.K.; Sendur, K.; Okatan, M.B.Ferroelectric/dielectric layered stacks are of special interest as gate oxides in the pursuit of designing low-power transistors, where the electrostatics of such stacks are thought to provide a means to allow for voltage amplification in the semiconductor channel. Strain and thickness dependence of the response of such a gate stack in relation to voltage amplification in a semiconductor channel becomes important to identify, which is what we study in this work using a thermodynamic approach. For a ferroelectric multidomain state as the stable phase in the stack, our findings show that a limited magnitude of voltage amplification appears to be feasible. Voltage amplification at the semiconductor surface is computed to hardly exceed 1.2 in thick bilayers (40 nm) for strains stabilizing the multidomain state and attains even less than this value for the thinner stacks. © 2023 American Chemical Society.Article Citation - WoS: 11Fabrication of Helix Aspersa Extract Loaded Gradient Scaffold With an Integrated Architecture for Osteochondral Tissue Regeneration: Morphology, Structure, and in Vitro Bioactivity [2](American Chemical Society, 2023) Tamburacı, Sedef; Perpelek, Merve; Aydemir, Selma; Baykara, Başak; Havıtçıoğlu, Hasan; Tıhmınlıoğlu, FundaRegeneration of osteochondral tissue with its layered complex structure and limited self-repair capacity has come into prominence as an application area for biomaterial design. Thus, literature studies have aimed to design multilayered scaffolds using natural polymers to mimic its unique structure. In this study, fabricated scaffolds are composed of transition layers both chemically and morphologically to mimic the gradient structure of osteochondral tissue. The aim of this study is to produce gradient chitosan (CHI) scaffolds with bioactive snail (Helix aspersa) mucus (M) and slime (S) extract and investigate the structures regarding their physicochemical, mechanical, and morphological characteristics as well as in vitro cytocompatibility and bioactivity. Gradient scaffolds (CHI-M and CHI-S) were fabricated via a layer-by-layer freezing and lyophilization technique. Highly porous and continuous 3D structures were obtained and observed with SEM analysis. In addition, scaffolds were physically characterized with water uptake test, micro-CT, mechanical analysis (compression tests), and XRD analysis. In vitro bioactivity of scaffolds was investigated by co-culturing Saos-2 and SW1353 cells on each compartment of gradient scaffolds. Osteogenic activity of Saos-2 cells on extract loaded gradient scaffolds was investigated in terms of ALP secretion, osteocalcin (OC) production, and biomineralization. Chondrogenic bioactivity of SW1353 cells was investigated regarding COMP and GAG production and observed with Alcian Blue staining. Both mucus and slime incorporation in the chitosan matrix increased the osteogenic differentiation of Saos-2 and SW1353 cells in comparison to the pristine matrix. In addition, histological and immunohistological staining was performed to investigate ECM formation on gradient scaffolds. Both characterization and in vitro bioactivity results indicated that CHI-M and CHI-S scaffolds show potential for osteochondral tissue regeneration, mimicking the structure as well as enhancing physical characteristics and bioactivity. © 2023 The Authors. Published by American Chemical Society.Article Citation - WoS: 22Citation - Scopus: 21Preparation of Interconnected Pickering Polymerized High Internal Phase Emulsions by Arrested Coalescence(American Chemical Society, 2022) Sherborne, Colin; Reilly, Gwendolen C.; Claeyssens, Frederik; Durgut, Enes; Aldemir Dikici, BetülEmulsion templating is a method that enables the production of highly porous and interconnected polymer foams called polymerized high internal phase emulsions (PolyHIPEs). Since emulsions are inherently unstable systems, they can be stabilized either by surfactants or by particles (Pickering HIPEs). Surfactant-stabilized HIPEs form materials with an interconnected porous structure, while Pickering HIPEs typically form closed pore materials. In this study, we describe a system that uses submicrometer polymer particles to stabilize the emulsions. Polymers fabricated from these Pickering emulsions exhibit, unlike traditional Pickering emulsions, highly interconnected large pore structures, and we related these structures to arrested coalescence. We describe in detail the morphological properties of this system and their dependence on different production parameters. This production method might provide an interesting alternative to poly-surfactant-stabilized-HIPEs, in particular where the application necessitates large pore structures.Article Citation - WoS: 9Citation - Scopus: 18Improvement of Photophysical Properties of Cspbbr3 and Mn2+:cspb(br,cl)(3) Perovskite Nanocrystals by Sr2+ Doping for White Light-Emitting Diodes(American Chemical Society, 2022) Yüce, Hürriyet; Mandal, Mukunda; Yalçınkaya, Yenal; Andrienko, Denis; Demir, Mustafa MuammerAll-inorganic metal halide perovskite nanocrystals (NCs) having the general formula ABX(3), where A is a monovalent cation, for example, Cs+, B is a divalent cation, typically Pb2+, and X is Cl-, Br-, I-, or their binary mixture, show potential in optoelectronic devices. In this work, we explore the effect of B-site doping on the optoelectronic properties of CsPbX3 NCs (X = Br, Cl). First, the Pb2+ ions in the pristine CsPbBr3 NC are partially substituted by Mn2+ ions. The alkaline earth metal strontium is then doped on both pristine and the Mn2+-substituted NCs. We found that a small percentage of Sr2+ doping remarkably improves the photoluminescence quantum yield of CsPbBr3 and Mn2+-state emission in Mn2+:CsPb(Br,Cl)(3) NCs. Perovskite NC film/ poly(methyl methacrylate) composites with all four NC variants were used in a white light-emitting diode (WLED), where Sr2+ doping increased the luminous efficiency of the WLED by similar to 4.7%. We attribute this performance enhancement to a reduced defect density and an attenuated microstrain in the local NC structure.Article Citation - WoS: 8Citation - Scopus: 7Cvd-Deposited Oxygen-Selective Fluorinated Siloxane Copolymers as Gas Diffusion Layers(American Chemical Society, 2022) Cihanoğlu, Gizem; Ebil, ÖzgençCopolymer thin films of 2,4,6,8-tetramethyl-2,4,6,8-tetravinylcyclotetrasiloxane (V4D4), 2-(perfluorohexylethylacrylate) (PFHEA), and 2-(perfluoroalkylethylmethacrylate) (PFEMA) were synthesized via initiated chemical vapor deposition (iCVD) as potential candidates for gas diffusion layers (GDLs) in gas diffusion electrodes (GDEs) for aqueous metal–air batteries. Thin-film GDLs exhibited an average water vapor transmission rate of 7.5 g m–2 day–1 and enhanced oxygen diffusion with oxygen permeabilities as high as 3.53 × 10–15 mol m m–2 s–1 Pa–1 (10.5 Barrer). The electrochemical performance of GDEs fabricated using commercial catalysts, current collectors, and synthesized GDLs was investigated by cyclic voltammetry, electrochemical impedance spectroscopy, and potentiodynamic polarization measurements. The fabricated GDEs exhibited higher oxygen reduction current densities (228.2 mA cm–2) compared to commercial GDEs (132.7 mA cm–2). Copolymer GLDs exhibited an order of magnitude higher oxygen diffusion (39.5 × 10–8 cm2 s–1) in GDEs compared to commercial counterparts (1.84 × 10–8 cm2 s–1). Due to the high oxygen solubility of V4D4 and excellent hydrophobic behavior of PFHEA and PFEMA, their copolymers can effectively promote the diffusion of oxygen and restrict moisture intake, making them ideal materials for GDLs. Combining well-balanced properties of siloxane and fluorinated polymer chemistries, the iCVD process is an excellent low-cost method for the fabrication of GDLs for metal–air battery applications.Article Citation - WoS: 46Citation - Scopus: 46Thiolene- and Polycaprolactone Methacrylate-Based Polymerized High Internal Phase Emulsion (polyhipe) Scaffolds for Tissue Engineering(American Chemical Society, 2022) Aldemir Dikici, Betül; Malayeri, Atra; Sherborne, Colin; Dikici, Serkan; Paterson, Thomas; Dew, Lindsey; Claeyssens, FrederikHighly porous emulsion templated polymers (PolyHIPEs) provide a number of potential advantages in the fabrication of scaffolds for tissue engineering and regenerative medicine. Porosity enables cell ingrowth and nutrient diffusion within, as well as waste removal from, the scaffold. The properties offered by emulsion templating alone include the provision of high interconnected porosity, and, in combination with additive manufacturing, the opportunity to introduce controlled multiscale porosity to complex or custom structures. However, the majority of monomer systems reported for PolyHIPE preparation are unsuitable for clinical applications as they are nondegradable. Thiol-ene chemistry is a promising route to produce biodegradable photocurable PolyHIPEs for the fabrication of scaffolds using conventional or additive manufacturing methods; however, relatively little research has been reported on this approach. This study reports the groundwork to fabricate thiol- and polycaprolactone (PCL)-based PolyHIPE materials via a photoinitiated thiolene click reaction. Two different formulations, either three-arm PCL methacrylate (3PCLMA) or four-arm PCL methacrylate (4PCLMA) moieties, were used in the PolyHIPE formulation. Biocompatibility of the PolyHIPEs was investigated using human dermal fibroblasts (HDFs) and human osteosarcoma cell line (MG-63) by DNA quantification assay, and developed PolyHIPEs were shown to be capable of supporting cell attachment and viability.Article Citation - WoS: 16Citation - Scopus: 16Silylethynyl substitution for preventing aggregate formation in perylene diimides(American Chemical Society, 2021) Aksoy, Erkan; Danos, Andrew; Li, Chunyong; Monkman, Andrew P.; Varlıklı, CananEthynylene-bridged perylene diimides (PDIs) with different sized silane groups have been synthesized as a steric blocking group to prevent the formation of non-radiative trap sites, for example, strong H-aggregates and other dimers or excimers. Excited singlet-state exciton dynamics were investigated by time-resolved photoluminescence and ultrafast pump-probe transient absorption spectroscopy. The spectra of the excimer or dimer aggregates formed by the PDIs at high concentrations were also determined. Although the photophysical properties of the bare and shielded PDIs are identical at micromolar concentrations, more shielded PDI2 and PDI3 exhibited resistance to aggregation, retaining higher photoluminescence quantum yield even at 10 mM concentration and in neat films. The PDIs also exhibited high photostability (1 h of continuous excitation), as well as electrochemical stability (multiple cycles with cyclic voltammetry). Prevention of dimer/aggregate formation in this manner will extend the uses of PDIs to a variety of high concentration photonics and optoelectronic applications, such as organic light-emitting diodes, organic photovoltaics, and luminescent solar concentrators.Article Citation - WoS: 15Citation - Scopus: 14Electroactive Nanogel Formation by Reactive Layer-By Assembly of Polyester and Branched Polyethylenimine Via Aza-Michael Addition(American Chemical Society, 2021) Yıldırımkaraman, Öykü; Özenler, Sezer; Günay, Ufuk Saim; Durmaz, Hakan; Yıldız, Ümit HakanWe here demonstrate the utilization of reactive layer-by-layer (rLBL) assembly to form a nanogel coating made of branched polyethylenimine (BPEI) and alkyne containing polyester (PE) on a gold surface. The rLBL is generated by the rapid aza-Michael addition reaction of the alkyne group of PE and the -NH2 groups of BPEI by yielding a homogeneous gel coating on the gold substrate. The thickness profile of the nanogel revealed that a 400 nm thick coating is formed by six multilayers of rLBL, and it exhibits 50 nm roughness over 8 mu m distance. The LBL characteristics were determined via depth profiling analysis by X-ray photoelectron spectroscopy, and it has been shown that a 70-100 nm periodic increase in gel thickness is a consequence of consecutive cycles of rLBL. A detailed XPS analysis was performed to determine the yield of the rLBL reaction: the average yield was deduced as 86.4% by the ratio of the binding energies at 286.26 eV, (C CN-C bond) and 283.33 eV, (C C triple bond). The electrochemical characterization of the nanogels ascertains that up to the six-multilayered rLBL of BPEI-PE is electroactive, and the nanogel permeability had led to drive mass and charge transfer effectively. These results promise that nanogel formation by rLBL films may be a straightforward modification of electrodes approach, and it exhibits potential for the application of soft biointerfaces.