Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
5 results
Search Results
Now showing 1 - 5 of 5
Article Citation - WoS: 14Citation - Scopus: 19Influence of Carbon Nanotube Inclusions To Electrical, Thermal, Physical and Mechanical Behaviors of Carbon-Fiber Abs Composites(Springer, 2022) Akar, Alinda Öykü; Yıldız, Ümit Hakan; Tirkeş, Seha; Tayfun, Ümit; Hacıvelioğlu, FerdaAcrylonitrile–butadiene–styrene (ABS) terpolymer was compounded with short carbon fiber (CF) and carbon nanotube (CNT) using a micro-extruder followed by the injection molding process. Composite samples were fabricated with loading ratios of 20 wt.% CF and 0.1, 0.5 and 1.0 wt.% of CNT. Mechanical, electrical, thermo-mechanical, thermal, melt-flow, and structural investigations of ABS-based composites were conducted by performing tensile, impact, hardness, and wear tests, conductive atomic force microscopy (AFM), dynamic mechanical analysis (DMA), thermal gravimetric analysis (TGA), melt flow rate test (MFR), scanning electron microscopy (SEM) characterization techniques, respectively. According to mechanical test data of resultant composites including tensile and impact test findings, CNT additions led to the remarkable increase in tensile strength and impact resistance for CF reinforced ABS composites. The formation of synergy between CNT nanoparticles and CF was confirmed by electrical conduction results. The conductive path in ABS/CF composite system was achieved by the incorporation of CNT with different loading levels. SEM micrographs of composites proved that CNT nanoparticles exhibited homogeneous dispersion into ABS matrix for lower loadings. Graphical abstract: [Figure not available: see fulltext.].Article Citation - WoS: 28Citation - Scopus: 31The Effects of Catalyst Pretreatment, Growth Atmosphere and Temperature on Carbon Nanotube Synthesis Using Co-mo/Mgo Catalyst(Elsevier Ltd., 2015) İnce Yardımcı, Atike; Yılmaz, Selahattin; Selamet, YusufThe growth of high quality and high yield carbon nanotubes (CNTs) by catalytic chemical vapor deposition (CVD) of CH4 over Co-Mo/MgO catalyst was investigated for different growth temperatures and H2 flow rates. It was observed that CNT yield decreased with the H2 flow rate, however, quality increased with increasing H2 flow rate. CNT yield increased for the temperatures 850-950 °C but dropped significantly above 950 °C. In this study, the highest yield of 1526% was obtained at the growth temperature of 950 °C. The optimum H2 flow rate was 200 sccm; this rate gave both high graphitization and high yield of product. Various CNT growth atmospheres including Ar, H2 and the mixture of both gases were also analyzed and it was observed that the highest quality CNTs were obtained for both pretreatment and growth carried out with H2. This gave a high yield of 292%. On the other hand, CNT growth carried out under Ar atmosphere gave higher CNT yield of 368%, however, the CNTs grown with Ar were more defective and had larger diameters. Prime novelty statement We demonstrate a sorbitol added catalysis synthesis method and importance of the ideal growth conditions to improve high quality single walled carbon nanotube yield up to 1500%.Article Citation - WoS: 7Citation - Scopus: 8Comparison of Electron and Phonon Transport in Disordered Semiconductor Carbon Nanotubes(Springer Verlag, 2013) Sevinçli, Haldun; Lehmann, T.; Ryndyk, D. A.; Cuniberti, G.Charge and thermal conductivities are the most important parameters of carbon nanomaterials as candidates for future electronics. In this paper we address the effects of Anderson type disorder in long semiconductor carbon nanotubes (CNTs) to electron charge conductivity and lattice thermal conductivity using the atomistic Green function approach. The electron and phonon transmissions are analyzed as a function of the length of the disordered nanostructures. The thermal conductance as a function of temperature is calculated for different lengths. Analysis of the transmission probabilities as a function of length of the disordered device shows that both electrons and phonons with different energies display different transport regimes, i.e. quasi-ballistic, diffusive and localization regimes coexist. In the light of the results we discuss heating of the semiconductor device in electronic applications. Disordered nanostructures; Disordered semiconductors; Electron and phonon transports; Electronic applicationArticle Citation - WoS: 31Citation - Scopus: 35Electrochemical Investigation of Biomolecular Interactions Between Platinum Derivatives and Dna by Carbon Nanotubes Modified Sensors(Elsevier Ltd., 2010) Yapaşan, Ece; Çalışkan, Ayfer; Karadeniz, Hakan; Erdem, ArzumThe biomolecular interactions of platinum derivatives widely used as anticancer drugs: cis-diamminedichloroplatinum(II) and oxaliplatin with calf thymus double-stranded DNA were studied using differential pulse voltammetry (DPV) and electrochemical impedance spectroscopy (EIS) in combination with single-walled carbon nanotubes modified graphite electrode (SWCNTs-GE) and unmodified graphite electrode (bare GE). The performance of these biomolecular interactions were explored at the electrode surface by monitoring the changes at guanine oxidation signal in terms of optimum interaction times by comparing the results of SWCNTs-GE with bare one. The features of these electrochemical sensors based on carbon nanotubes for monitoring of biomolecular interactions were discussed and compared with the earlier conventional ones. © 2009 Elsevier B.V. All rights reserved.Article Citation - WoS: 10Citation - Scopus: 10Carbon Nanotube Diameter Tuning Using Hydrogen Amount and Temperature on Sio2/Si Substrates(Springer Verlag, 2010) Aksak, Meral; Selamet, YusufCarbon nanotubes (CNTs) were grown on thin iron (Fe) films on SiO 2/Si substrates by chemical vapor deposition (CVD) at four different hydrogen (H2)/methane (CH4) ratios at temperatures ranging from 925 to 1000°C. The effects of temperature and the amount of hydrogen gas on the mean diameter at increasing temperature were examined. We demonstrated that the mean diameter and its distribution depend not only on temperature but also on the H2 amount. We showed that increasing H2 amount strongly affects the structure of CNTs, especially at high growth temperature; the mean diameter at 1000°C reduced from about 383 to 34 nm by increasing H2 amount from 24 to 50 sccm. We observed that at high temperature growth the mean diameter was decreasing very fast initially with increasing H2 amount suggesting the dominance of H2 over the growth temperature. A decrease in the slope of diameter vs. H 2 amount with further increment in H2 amount implied that the temperature was, then, deciding the CNT diameter through catalyst particle coarsening. The statistical analysis presented implies that the H2 amount has to be adjusted according to the growth temperature for given CH 4 amount to keep CNT diameter under control, and the large diameter distributions at high temperature and high H2 amount can be associated with the large variation in the catalyst particle sizes. © 2010 Springer-Verlag.