Scopus İndeksli Yayınlar Koleksiyonu / Scopus Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7148
Browse
6 results
Search Results
Now showing 1 - 6 of 6
Article Citation - WoS: 32Citation - Scopus: 36A Review of Boron Removal From Aqueous Solution Using Carbon-Based Materials: an Assessment of Health Risks(Elsevier, 2022) Gören, Ayşegül Yağmur; Recepoğlu, Yaşar Kemal; Karagündüz, Ahmet; Khataee, Alireza; Yoon, YeojoonCarbon-based compounds have gained attention of researchers for use in boron removal due to their properties, which make them a viable and low cost adsorbent with a high availability, as well as environmental friendliness and high removal efficiency. The removal of boron utilizing carbon-based materials, including activated carbon (AC), graphene oxide (GO), and carbon nanotubes (CNTs), is extensively reviewed in this paper. The effects of the operating conditions, kinetics, isotherm models, and removal methods are also elaborated. The impact of the modification of the lifetime of carbon-based materials has also been explored. Compared to unmodified carbon based materials, modified materials have a significantly higher boron adsorption capability. It has been observed that adding various elements to carbon-based materials improves their surface area, functional groups, and pore volume. Tartaric acid, one of these doped elements, has been employed to successfully improve the boron removal and adsorption capabilities of materials. An assessment of the health risk posed to humans by boron in treated water utilizing carbon-based materials was performed to better understand the performance of materials in real-world applications. Furthermore, the boron removal effectiveness of carbon-based materials was evalu ated, as well as any shortcomings, future perspectives, and gaps in the literature.Article Citation - WoS: 6Citation - Scopus: 6Photocatalytic Activity of Dye-Sensitized and Non-Sensitized Go-Tio2 Nanocomposites Under Simulated and Direct Sunlight(Wiley-Blackwell, 2022) İlhan, Hatice; Durmaz Çaycı, Gamze Belkis; Aksoy, Erkan; Diker, Halide; Varlıklı, CananGraphene oxide (GO), amine-modified graphene oxide (mGO), and N-TiO2 composites were synthesized by low-temperature hydrothermal method and characterized by using X-ray diffraction, X-ray photoelectron spectroscopy, FTIR, and BET analysis techniques. The films of synthesized TiO2, mGO:TiO2, N-TiO2, GO:TiO2, GO:N-TiO2, and commercially available P25 were prepared by doctor blade method. These films and their perylene-3,4,9,10-tetracarboxy tetrabutylester (PTE)-sensitized forms were employed as photocatalysts for the photodegradation of rhodamine-B (RhB) under Xe lamp and direct sunlight irradiations. Independent from the irradiation source, the photocatalytic order of the non-sensitized films were GO:N-TiO2 > GO:TiO2 > N-TiO2 > mGO:TiO2 > TiO2 > P25, but seven and 15 folds of increments were detected under direct sunlight irradiation. PTE-sensitized catalyst films exhibited more than two folds of increase in the photocatalytic rate constants compared to their non-sensitized counterparts under Xe lamp irradiation. Under direct sunlight irradiation no matter which photocatalyst was used, the photocatalytic activity of these films was enhanced seven folds. Reusability tests revealed no significant changes in the photocatalytic rate constants obtained with both the non-sensitized and sensitized films.Article Citation - WoS: 56Citation - Scopus: 64Carbonaceous Materials for Removal and Recovery of Phosphate Species: Limitations, Successes and Future Improvement(Pergamon-Elsevier Science Ltd, 2022) Recepoğlu, Yaşar Kemal; Gören, Ayşegül Yağmur; Orooji, Yasin; Khataee, AlirezaThe carbonaceous materials have gained significant interest for the phosphorus species remediation and recovery in the last decade. Carbonaceous materials present many unique features, such as cost effective, availability, environmentally friendly, and high removal efficiency that make them a promising adsorbent. In this review, the recent application of carbonaceous materials including activated carbon (AC), graphene and graphene oxide (GO), lignin, carbon nanotubes (CNTs), and gC(3)N(4) for phosphate removal and recovery were comprehensively summarized. The kinetics and isotherm models, removal mechanisms, and effects of operating parameters are reported. The reusability, lifetime of carbonaceous materials, and impact of modification were also considered. The modified carbonaceous materials have significantly high phosphate adsorption capacity compared to unmodified adsorbents. Namely, MgO-functionalized lignin-based bio-charcoal exhibited a 906.8 mg g(-1) of capacity as the highest one among other reviewed materials. The modification of carbonaceous materials with various elements has been presented to improve the surface functional groups, surface area and charge, and pore volume and size. Among these loaded elements, iron has been effectively used to provide a prospect for magnetic recovery of the adsorbent as well as increase phosphate adsorption. Furthermore, the phosphate recovery methods, phosphate removal efficiency of carbonaceous materials, the limitations, important gaps in the literature, and future studies to enhance applicability of carbonaceous materials in real scale are also discussed.Article Citation - WoS: 28Citation - Scopus: 29Enhancing the Efficiency of Mixed Halide Mesoporous Perovskite Solar Cells by Introducing Amine Modified Graphene Oxide Buffer Layer(Elsevier, 2020) Şahin, Çiğdem; Diker, Halide; Sygkridou, Dimitra; Varlıklı, Canan; Stathatos, EliasIn this study, graphene oxide (GO) was synthesized via Tour method and then modified with two different amine sources that contained different branched alkyl chains. The GO and modified GOs (mGOs) with dihexylamine (DHA) and 2-ethylhexylamine (2EHA) as amine sources were used respectively as buffer layers in mixed halide mesoporous perovskite solar cells (PSCs) in order to examine whether they could improve their performance. GO and mGO samples were characterized by several techniques such as X-Ray Diffraction, X-Ray photoelectron spectroscopy (XPS), Raman analysis and thermal gravimetric analysis (TGA). The preparation of the CH3NH3PbI3-xClx perovskite solution was performed using standard Schlenk techniques under argon atmosphere to attain a homogeneous coverage of the perovskite film. The solar cells with the additional layer of mGO derivatives between perovskite and hole transporting layer showed an improved overall performance compared to the reference devices which was attributed to the enhanced charge carrier transport via the mGOs. In particular, 10% increase to the overall performance of the solar cells was monitored in devices where 2-ethylhexylamine (2EHA) modified GO was used, compared to standard cell without buffer layer. (C) 2019 Elsevier Ltd. All rights reserved.Article Citation - WoS: 19Citation - Scopus: 20Controlling the Distribution of Oxygen Functionalities on Go and Utilization of Pedot:pss-Go Composite as Hole Injection Layer of a Solution Processed Blue Oled(Elsevier Ltd., 2017) Diker, Halide; Durmaz, Gamze Belkis; Bozkurt, Hakan; Yeşil, Fatih; Varlıklı, CananGraphene oxide (GO) was synthesis by Tour method. Particle size distribution effects of raw graphite on the resulting structural, morphological, optical and electrical properties of GO samples and their poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) composites are studied for the graphite particle distributions of <150, 45–75 and 25–45 μm. It is determined that particle size of raw graphite have an impact on oxidation degree, the chemical nature of oxygen functional groups on GO and it also affects the lateral size of obtained GO. PEDOT:PSS-GO composites are utilized as hole injection layer (HIL) in a solution process blue organic light emitting diode. Presence of GO caused negative differential resistance (NDR) and NDR intensity was decreased with the decrease in lateral size of GO, increase in the graphite particle size and carboxyl% of obtained GO. All PEDOT:PSS-GO composite based devices presented better performance than the bare PEDOT:PSS based reference device. The maximum luminous and external quantum efficiency values of the device that contain HIL of PEDOT:PSS-GO(150) were more than 40% and 50% higher than that of the reference, respectively. Two folds of increase in these performance values were able to be reached with the concentration optimization of GO/150 in PEDOT:PSS.Article Citation - WoS: 24Citation - Scopus: 23Graphene Oxide Bionanocomposite Coatings With High Oxygen Barrier Properties(MDPI Multidisciplinary Digital Publishing Institute, 2016) Uysal Ünalan, İlke; Boyacı, Derya; Ghaani, Masoud; Trabattoni, Silvia; Farris, StefanoIn this work, we present the development of bionanocomposite coatings on poly(ethylene terephthalate) (PET) with outstanding oxygen barrier properties. Pullulan and graphene oxide (GO) were used as main polymer phase and nanobuilding block (NBB), respectively. The oxygen barrier performance was investigated at different filler volume fractions (φ) and as a function of different relative humidity (RH) values. Noticeably, the impermeable nature of GO was reflected under dry conditions, in which an oxygen transmission rate (OTR, mL m-2 24 h-1) value below the detection limit of the instrument (0.01 mL m-2 24 h-1) was recorded, even for ' as low as 0.0004. A dramatic increase of the OTR values occurred in humid conditions, such that the barrier performance was totally lost at 90% RH (the OTR of coated PET films was equal to the OTR of bare PET films). Modelling of the experimental OTR data by Cussler’s model suggested that the spatial ordering of GO sheets within the main pullulan phase was perturbed because of RH fluctuations. In spite of the presence of the filler, all the formulations allowed the obtainment of final materials with haze values below 3%, the only exception being the formulation with the highest loading of GO (φ 0.03). The mechanisms underlying the experimental observations are discussed.