Master Degree / Yüksek Lisans Tezleri

Permanent URI for this collectionhttps://hdl.handle.net/11147/3008

Browse

Filters

2015 - 201922020 - 20241

Settings

Department: search.filters.department.Thesis (Master)--İzmir Institute of Technology, BioengineeringSubject: search.filters.subject.Polymers

Search Results

Now showing 1 - 3 of 3
  • Master Thesis
    Development and Characterization of Surface-Modified Emulsion Templated Scaffolds for Tissue Engineering Applications
    (01. Izmir Institute of Technology, 2024) Kocagöz, Mehmet; Dikici, Betül Aldemir; Zareıe, Esma Volga Bulmuş
    Emülsiyon şablonlama, yüksek ve açık gözeneklilik sağlayan avantajlı bir iskele üretim yöntemidir. Bu yöntemde hidrofobik polimerlerin su ile karıştırılmasıyla yağ içerisinde su (w/o) emülsiyonları elde edilir. İç faz hacmi %74'ün üzerinde olan polimerize emülsiyonlar, yüksek iç fazlı emülsiyonlar (PolyHIPE'ler) olarak adlandırılır. Polikaprolakton, doku mühendisliğinde yaygın olarak kullanılan sentetik, biyolojik olarak bozunabilen ve biyouyumlu bir polimerdir, ancak malzemenin hidrofobik karakteri hücre-materyal etkileşimlerini sınırlamaktadır. Bu nedenle, bu çalışma kapsamında, emülsiyon şablonlama yöntemi ile üretilmiş, polikaprolakton tetrametakrilat (4PCLMA) esaslı iskelelerin biyolojik performanslarını artırmak için iskelelerin alkali muamelesi ve elde edilen iskelelerin karakterize edilmesi amaçlanmıştır. İlk olarak halka açma polimerizasyonu ile 4PCLMA pre-polimeri sentezlenmiş ve metakrilat grupları ile fonksiyon kazandırılmıştır. 4PCLMA ~%97 metakrilasyon derecesi ile başarıyla sentezlenmiş, 4PCLMA esaslı PolyHIPE'ler emülsiyon şablonlama yöntemi ile üretilmiş, üç farklı konsantrasyonda ve inkübasyon süresinde sodyum hidroksit (NaOH) ile muamele edilmiştir. NaOH işleminin iskelelerin morfolojileri, kütle kaybı, su tutma kapasitesi, mekanik özellikleri, yüzey alanı, hidrofilisitesi ve biyolojik performansı üzerindeki etkileri araştırılmıştır. NaOH uygulamasının iskelelerin ağırlığını ve mekanik mukavemetini azalttığı ancak aynı zamanda iskelelerin su tutma kapasitesini, hidrofilisitesini, yüzey alanını ve protein adsorpsiyon kapasitesini artırdığı görülmüştür. NaOH işleminden sonra PolyHIPE'lerdeki kimyasal değişiklikler spektroskopi ile doğrulanmıştır. In vitro sonuçlar, NaOH uygulamasının L929 hücreleri üzerinde sitotoksisiteye neden olmadığını ve Saos-2 hücrelerinin tutunma ve çoğalma davranışını olumlu yönde etkilediğini göstermiştir. Bu çalışma sonucunda NaOH muamelesinin, emülsiyon şablonlama ile üretilmiş doku iskelelerinin hidrofilisitesini ve biyolojik performansını artırmak adına alternatif bir yüzey modifikasyon yöntemi olarak kullanılabileceği gösterilmiştir.
  • Master Thesis
    Sericin-Polymer Conjugates: Preparation and Physicochemical Characterization
    (Izmir Institute of Technology, 2017) Gül, Abdulkadir; Bulmuş Zareie, Esma Volga
    Sericin is a protein derived from silkworm, Bombyx mori, and has several useful properties as a natural biomaterial such as antioxidant character, moisturizing ability, hydrogel forming property and most importantly immunogenic inertness. The aim of this thesis is to prepare and physicochemically characterize sericin-polymer conjugates as potential natural-synthetic hybrid biomaterials with enhanced properties for drug delivery and tissue engineering applications. For this purpose, three polymers having the same degree of polymerization (n~42) and varying chemical nature, i.e. poly(oligoethylene glycol methacrylate), P(OEGMA) hydrophilic and neutral, poly(hydroxyethylmethacrylate) P(HEMA) less hydrophilic and neutral, and poly(dimethylaminoethyl methacrylate) P(DMAEMA) hydrophilic and cationic after quaternization, were first synthesized via reversible addition fragmentation chain transfer (RAFT) polymerization. Each polymer was characterized via nuclear magnetic resonance (1H-NMR) and gel permeation chromatography (GPC). Separately, molecular weight and isoelectric point of sericin were characterized using various techniques including Sodium Dodecyl Sulfate-Polyacrylamide Gel Electrophoresis (SDS-PAGE) and High-Resolution Two-Dimensional Polyacrylamide Gel Electrophoresis (2D-PAGE). Polymers were then covalently conjugated to sericin using NHS/EDC chemistry. The conjugates were characterized using SDS-PAGE, GPC and DLS (Dynamic Light Scattering). The SDS-PAGE and GPC results showed the successful preparation of the conjugates. DLS revealed that the hydrodynamic size of P(OEGMA) and P(DMAEMA) polymers and their conjugates were between 1 and 10 nm as they are soluble in PBS and do not form aggregates. Unlike the other two polymers, although the size of P(HEMA) polymer was observed to be 3.24 ± 0.62 nm, the DLS measurements of P(HEMA) conjugates indicated the presence of self-organization and aggregation of Sericin-P(HEMA) conjugates in aqeuous solution. Consequently, the size of sericin-P(HEMA) conjugates were found to be 530 ± 60.83 and 223.3 ± 25.2, respectively.
  • Master Thesis
    Development of Antibacterial Polymer Based Nanocomposite Materials
    (Izmir Institute of Technology, 2015) Abatay, Ezgi; Arslanoğlu, Alper; Tanoğlu, Metin
    Human beings are often infected by microorganisms such as bacterium, mold, yeast, virus, etc. in the living environment. It became a requirement and a necessity to create sterile fields in areas. Composite stones are one of the main materials that can be used for the contact surfaces in indoor and outdoor places due to their being of highly resistant to abrasives, chemicals and impacts. Research has been intensive in antibacterial material containing various inorganic substances. The aim of this thesis is investigating the antibacterial effect of inorganic substances such as silver, zinc oxide, calcium oxide, titanium oxide and magnesium oxide on stone products. This study also deals with the silver doped zinc oxide powder and their antibacterial efficacies. Stone product is formed of mainly two type compound which are quartz aggregates as reinforced and filler and thermoset polyester resin as matrix. The manufacturing process begins with selection of raw quartz materials. They are crushed and blended in the ratio of 90 % quartz aggregates to 10% polyester matrix and other additives such as antibacterial agent, pigment. These united constituents are used for production of composite stones by applying those combined vacuum, vibration and pressing processes which are named as vibropress, simultaneously. Following it, they are subjected to surface preparation and polishing processes. In this study, mechanical, thermal, and morphological properties of the particles, polyester matrix and stone product were investigated. Antibacterial efficacies of these were investigated based on colony-count method against gram negative (E.coli) and gram positive (Bacillus subtilis) bacteria. Silver-containing stone samples showed best antibacterial property about ninety-nine percent reduction.