Civil Engineering / İnşaat Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/13
Browse
78 results
Filters
Settings
Search Results
Article Citation - Scopus: 1Anomalous Crustal Structure Beneath the Örenli-Eğiller Depression Zone, Inferred From Magnetotelluric Studies, Western Anatolia, Türkiye(TÜBİTAK - Türkiye Bilimsel ve Teknolojik Araştırma Kurumu, 2024) Chandrasekharam, Dornadula; Raju, K.; Subba Rao, P.B.V.; Baba, AlperIn Türkiye, the prevalence of high radiogenic granites makes them ideal locations for initiating enhanced geothermal system (EGS) projects. One such occurrence of these granites is observed in the Kozak area of the Bergama region. To assess the energy potential of this site, a magnetotelluric (MT) survey was conducted, focusing on determining the depth distribution of the intrusive granite. The survey employed dimensionality analysis, utilizing Bahr skew and phase tensor analyses that denote a 2D subsurface nature up to 100 s and beyond that a 3D nature. In the present study, we interpreted MT data up to 100 s. The data collected, including rotated impedance tensors and tippers, were inverted using a nonlinear conjugate gradient algorithm integrated into the MT interpretation software of the WinG Link 2D inversion data modeling package. Multiple homogeneous half-space initial models were tested during the 2D inversion process. The findings indicate the existence of a midcrustal conductor associated with graphites and iron sulfides in the source region. This conductivity may be attributed to processes such as exsolution of metamorphic fluids, influx of mantle sources, or the entry of magmatic fluids through transcrustal fault zones. The findings indicate that the intrusive granite was emplaced along a NE–SW major fault, penetrating shallow crustal levels. The depth of this granite intrusion is determined to be 15 km, covering an outcrop area of 60 km². This detailed geological information allows a comprehensive assessment of the power-generating capacity of the intrusive granite. The results of this investigation contribute valuable insights for the development and optimization of Enhanced Geothermal System (EGS) projects in the region. © 2024, TUBITAK. All rights reserved.Review Citation - WoS: 19Citation - Scopus: 22Water Dams: From Ancient To Present Times and Into the Future(MDPI, 2024) Angelakis, Andreas N.; Baba, Alper; Valipour, Mohammad; Dietrich, Jorg; Fallah-Mehdipour, Elahe; Krasilnikoff, Jens; Ahmed, Abdelkader T.Since ancient times, dams have been built to store water, control rivers, and irrigate agricultural land to meet human needs. By the end of the 19th century, hydroelectric power stations arose and extended the purposes of dams. Today, dams can be seen as part of the renewable energy supply infrastructure. The word dam comes from French and is defined in dictionaries using words like strange, dike, and obstacle. In other words, a dam is a structure that stores water and directs it to the desired location, with a dam being built in front of river valleys. Dams built on rivers serve various purposes such as the supply of drinking water, agricultural irrigation, flood control, the supply of industrial water, power generation, recreation, the movement control of solids, and fisheries. Dams can also be built in a catchment area to capture and store the rainwater in arid and semi-arid areas. Dams can be built from concrete or natural materials such as earth and rock. There are various types of dams: embankment dams (earth-fill dams, rock-fill dams, and rock-fill dams with concrete faces) and rigid dams (gravity dams, rolled compacted concrete dams, arch dams, and buttress dams). A gravity dam is a straight wall of stone masonry or earthen material that can withstand the full force of the water pressure. In other words, the pressure of the water transfers the vertical compressive forces and horizontal shear forces to the foundations beneath the dam. The strength of a gravity dam ultimately depends on its weight and the strength of its foundations. Most dams built in ancient times were constructed as gravity dams. An arch dam, on the other hand, has a convex curved surface that faces the water. The forces generated by the water pressure are transferred to the sides of the structure by horizontal lines. The horizontal, normal, and shear forces resist the weight at the edges. When viewed in a horizontal section, an arch dam has a curved shape. This type of dam can also resist water pressure due to its particular shape that allows the transfer of the forces generated by the stored water to the rock foundations. This article takes a detailed look at hydraulic engineering in dams over the millennia. Lessons should be learned from the successful and unsuccessful applications and operations of dams. Water resource managers, policymakers, and stakeholders can use these lessons to achieve sustainable development goals in times of climate change and water crisis.Review Citation - WoS: 3Citation - Scopus: 3Evolution of Tunneling Hydro-Technology: From Ancient Times To Present and Future(MDPI, 2023) Angelakis, Andreas N.; Passchier, Cees W.; Valipour, Mohammad; Krasilnikoff, Jens A.; Tzanakakis, Vasileios A.; Ahmed, Abdelkader T.; Baba, Alper; Kumar, Rohitashw; Capodaglio, Andrea G.; Dercas, Nicholas; Bilgiç, EsraWater tunnels are one of the oldest hydro-technologies for extracting water resources and/or transmitting them through water distribution systems. In the past, human societies have used tunneling for various purposes, including development, as a measure to enable underground resource extraction and the construction of transportation networks in challenging landscapes and topographies. The development of hydro-technology potentially involves the construction of tunnels to feed aqueducts, irrigation and waste water systems. Thus, the ability to make and maintain tunnels became an important component in creating lasting and sustainable water systems, which increased water supply and security, minimized construction costs, and reduced environmental impact. Thus, this review asks how, when and why human societies of the past included tunneling for the development of lasting water supply systems. This review presents a comprehensive overview across time and space, covering the history of tunneling in hydro technology from antiquity to the present, and it ponders how past experiences could impact on future hydro-technological projects involving tunneling. A historical review of tunnel systems enhances our understanding of the potential, performance, challenges, and prospects associated with the use of hydro-techniques. In the past, as the different examples in time and space demonstrate, tunneling was often dedicated to solving local problems of supply and disposal. However, across the world, some features were repeated, including the need for carving through the living rock or digging to create tunnels covered with stone slabs. Also, the world-wide use of extensive and costly tunnel systems indicates the high level of investment which human societies are willing to make for securing control over and with its water resources. This study helps us to gather inspiration from proven technologies of the past and more recent knowledge of water tunnel design and construction. As we face global warming and its derivate problems, including problems of water scarcity and flooding, the ability to create and maintain tunnels remains an important technology for the future.Review Citation - WoS: 14Citation - Scopus: 25Sustainability of Water, Sanitation, and Hygiene: From Prehistoric Times To the Present Times and the Future(MDPI, 2023) Angelakis, Andreas N.; Capodaglio, Andrea G.; Passchier, Cees W.; Valipour, Mohammad; Krasilnikoff, Jens; Tzanakakis, Vasileios A.; Suermelihindi, Guel; Baba, AlperContaminated water and poor sanitation are associated with disease transmission. Absent, inadequate, or improperly managed water resources and sanitation systems expose individuals to preventable health risks. Billions of people lack access to these basic services today and will remain in this condition for decades to come. As we are usually thinking and talking about water, sanitation and hygiene services have changed. Looking back at the history of water, sanitation, and hygiene can help us understand the challenges and opportunities of these issues and draw lessons to achieve sustainable development in the future. Throughout history, civilizations have successfully experimented with treating water and using it for drinking, sanitation, and agriculture. For example, the Minoan civilizations originally focused on water treatment and cleaning to improve the aesthetic properties of drinking water. During prehistoric times, Minoan and Indus Valley civilizations, dating back to about 2000 BC, were the first to focus on the treatment of water supplies. From the early Minoan period, they relied on rainwater collection. During historic times, Hippocrates was the first to invent and used a water filter in the form of a cloth bag, at about 400 BC, known today as the Hippocrates Sleeve. The Romans perfected existing water technologies on a larger scale and initiated their spread throughout the Empire. Hygiene in ancient Rome was promoted by the famous public baths and toilets, which were supplied with water through widely branched aqueducts that had a high standard of cleanliness for the time and were regularly maintained.Review Citation - WoS: 25Citation - Scopus: 35Evolution of Floods: From Ancient Times To the Present Times (ca 7600 Bc To the Present) and the Future(MDPI, 2023) Angelakis, Andreas N.; Capodaglio, Andrea G.; Valipour, Mohammad; Krasilnikoff, Jens; Ahmed, Abdelkader T.; Mandi, Laila; Tzanakakis, Vasileios A.; Kumar, Rohitashw; Min, Zhang; Han, Mooyoung; Bashiru, Turay; Derkas, Nicholas; Baba, Alper; Bilgiç, EsraFloods are one of the most dangerous natural disasters, causing great destruction, damage, and even fatalities worldwide. Flooding is the phenomenon of a sudden increase or even slow increase in the volume of water in a river or stream bed as the result of several possible factors: heavy or very long precipitation, melting snowpack, strong winds over the water, unusually high tides, tsunamis, or the failure of dams, gages, detention basins, or other structures that hold back water. To gain a better understanding of flooding, it is necessary to examine evidence, search for ancient wisdom, and compare flood-management practices in different regions in a chronological perspective. This study reviews flood events caused by rising sea levels and erratic weather from ancient times to the present. In addition, this review contemplates concerns about future flood challenges and possible countermeasures. Thus, it presents a catalogue of past examples in order to present a point of departure for the study of ancient floods and to learn lessons for preparation for future flood incidents including heavy rainfalls, particularly in urbanized areas. The study results show that ancient societies developed multifaceted technologies to cope with floods and many of them are still usable now and may even represent solutions and measures to counter the changing and increasingly more erratic weather of the present.Article Citation - WoS: 13Citation - Scopus: 14Boron Removal From Geothermal Brine Using Hybrid Reverse Osmosis/Microbial Desalination Cell System(Elsevier, 2023) Jarma, Yakubu A.; Kabay, Nalan; Baba, Alper; Ökten, Hatice Eser; Gören, Ayşegül YağmurAgriculture sector leads worldwide as the most water consuming sector with water demand. Since natural water resources cannot keep up with the demand, a shift from conventional water resources to unconventional ones is needed. While geothermal water was gaining importance for its energy content, small-scale (<10 L/s) energy plants were not required to reinject their spent geothermal brine. As geothermal resources align with agricultural areas in Western Anatolia, discharge of untreated brine might have severe adverse effects on crop yields and soil quality. In this study, we investigated use of spent geothermal brine for irrigation after treatment with Reverse Osmosis/Microbial Desalination Cell (RO/MDC) hybrid process. Treatment efficiencies for B, COD, As, Li, Fe, Cr concentrations and energy production values were determined. Treated water was initially evaluated for irrigation considering three quality categories (I, II, and III) comprised of parameters such as electrical conductivity (EC), total dissolved solids (TDS), and sodium adsorption ratio (SAR), along with sodium, chloride and boron concentrations. Additionally, magnesium adsorption ratio (MAR) and permeability index (PI) were used to evaluate for irrigation suitability. Although B concentrations in MDC-treated permeate (3.29 mg/L) and concentrate (2.99 mg/L) streams were not low enough to meet Quality I criterion (<0.7 mg/L), they can be still utilized in irrigation of moderate-to-high tolerant plants. Furthermore, PI and MAR parameters pointed to suitability for irrigational use. © 2022Conference Object Citation - WoS: 3Salihli Granitoid, Menderes Massif, Western Anatolia: a Sustainable Clean Energy Source for Mitigating Co2 Emissions(2022) Chandrasekharam, Dornadula; Ayzit, Tolga; Baba, AlperTurkey has a great opportunity to promote renewable energy, which is produced from high heat-generating granitoids using EGS (Enhanced Geothermal Systems) technology. Exploiting the energy from the radiogenic granitoid will help the country save about 32211 million kg of CO2 from gas-based electricity power plants. In addition to the hydrothermal energy sources, energy from EGS will make the country free from energy deficit and provide sustainable power, water, and food. In the present paper, we assess the power generation capacity of Salihli granitoid (SG), with an outcropping area of about 100 km2 located within the western Anatolian plateau, and describe the technology involved in harnessing the heat from these granitoids. The Anatolian Plateau is known for extension tectonics and is explained by the westward tectonic escape and subduction rollback processes. The most prominent structures of western Anatolia are E-W and ENE-WSW trending graben and horst controlled by low and high-angle oblique to dip-slip normal faults, exposing the Menderes Massif. Magmatic activity in western Anatolia is mainly related to episodic-two stage extensional regime, where the early phase is characterized mainly by calc-alkaline Early-Middle Miocene felsic lavas and pyroclastic and the latter by late Miocene-Quaternary rift-related alkaline basaltic volcanism. The plutonic activity started during 12 to 15 Ma represented by SG. The heat generation capacity of the SG varies from 5.5 to 6.7 (µW/m3), while the heat flow values over SG range from 68 to 107 HF (mW/m2). These values are much higher compared to the global average crustal values.Article Citation - WoS: 11Citation - Scopus: 11Adapting Cities To Pluvial Flooding: the Case of Izmir (türkiye)(MDPI, 2022) Salata, Stefano; Couch, Virginia Thompson; Velibeyoğlu, Koray; Baba, Alper; Saygın, Nicel; Uzelli, TaygunIn the coming decades, climate change will be one of the most significant challenges for urban areas. The quantity, duration and intensity of events, such as flash rains and heat waves, will increase the vulnerability of urban regions while exposing citizens to potentially dangerous conditions. According to the current literature, mainstreaming resilience in urban planning means designing rules that strengthen urban systems’ adaptive and self-regulating functions by reducing their vulnerability. In this work, we aimed to build knowledge for the application of the sponge district concept to Izmir (Türkiye), one of Europe’s most vulnerable areas to pluvial flooding. To do this, we first analyzed the runoff in each urban sub-watershed, then employed a composite index to determine potential areas of intervention for nature-based solutions. Results show that 10% of Izmir’s urban areas are extremely vulnerable to cloudbursts, which means that 40% of the urban population is exposed to this phenomenon. Moreover, the runoff calculation in the sub-watershed demonstrated that the potential flood volume is underestimated, especially in the upslope areas. The results can be used as a template to suggest a stepwise approach to mainstream the resilience of densely-inhabited coastal urban catchments.Article Citation - WoS: 3Citation - Scopus: 4Geothermal Potential of Manuguru Geothermal Field of Godavari Valley, India(Elsevier, 2022) Singh, Hemant K.; Chandrasekharam, Dornadula; Minissale, A.; Raju, N. Janardhana; Baba, AlperThe Godavari geothermal field in India is one of the potential areas manifested by several geothermal waters and groundwaters. The geothermal waters of the area are near neutral (pH: 6.5–7.3) with surface temperature ranging from 30 to 55 °C while groundwaters are also near neutral (pH: 6.6–7.5) with surface temperature ranging from 24 to 28 °C. The hydrogeochemistry of the geothermal waters suggests that the geothermal waters show a Na-Ca-SO4-HCO3 to a Ca-HCO3 type and groundwaters are of the Ca-HCO3 to Na-Ca-HCO3 type while groundwaters and river waters are of the Ca-Na-SO4 types. The geothermal waters of the study area are enriched in SO42– and Cl–, due to the interaction with the pyrite-bearing Gondwana sediments and granitic gneiss basement rocks. Furthermore, enrichment of Ca2+, Mg2+ and an increased HCO3/Cl ratio in geothermal water is caused by the exchange and/or mixing process that takes place during water-rock interaction at an elevated temperature while ascending to the surface. This type of behavior of water is also observed during the water-rock interaction experiment at 100 °C. Studies on geothermal gas geochemistry suggest the deeper circulation of geothermal waters in the crust and high helium concentration as a thermal gas that can be utilized for commercial purposes. Estimated reservoir temperatures from quartz and Na-K-Ca geothermometry are in the range 110–195 °C. Therefore, the geothermal water of the study area is categorized as a moderate enthalpy geothermal system. Thermal logging in the borewell and depth range from 50 to 1000 m suggest that the geothermal gradient in the Manuguru area ranges from 22.5 to 105.5 °C/km and heat flow ranges from 83 to 388 mW/m2, which is higher than the regional condition. Therefore, 3584 MWe power can be produced by using the Organic Rankine Cycle (ORC) from the Manuguru geothermal area of Godavari valleyArticle Citation - WoS: 40Citation - Scopus: 47Boron in Geothermal Energy: Sources, Environmental Impacts, and Management in Geothermal Fluid(Elsevier, 2022) Mott, A.; Baba, Alper; Hadi Mosleh, Mojgan; Ökten, Hatice Eser; Babaei, Masoud; Gören, Ayşegül Yağmur; Feng, C.; Recepoğlu, Yaşar Kemal; Uzelli, Taygun; Uytun, Hüseyin; Morata, Diego; Yüksel Özşen, AslıThe problem of hazardous chemicals in geothermal fluid is a critical environmental concern in geothermal energy developments. Boron is among the hazardous contaminants reported to be present at high concentrations in geothermal fluids in various countries. Poor management and inadequate treatment of geothermal fluids can release excessive boron to the environment that has toxic effects on plants, humans, and animals. Despite the importance of boron management in geothermal fluid, limited and fragmented resources exist that provide a comprehensive understanding of its sources, transport and fate, and the treatment strategies in geothermal energy context. This paper presents the first critical review from a systematic and comprehensive review on different aspects of boron in geothermal fluid including its generation, sources, toxicity, ranges and the management approaches and treatment technologies. Our research highlights the origin of boron in geothermal water to be mainly from historical water-rock interactions and magmatic intrusion. Excessive concentrations of boron in geothermal fluids have been reported (over 500 mg/L in some case studies). Our review indicated that possible boron contamination in geothermal sites are mostly due to flawed construction of production/re-injection wells and uncontrolled discharge of geothermal water to surface water. The dominancy of non-ionic H3BO3 species makes the selection of the suitable treatment method for geothermal waters limited. Combining boron selective resins and membrane technologies, hybrid systems have provided effluents suitable for irrigation. However, their high energy consumption and course structure of boron selective resins encourage further research to develop cost-effective and environmentally friendly alternatives.