Civil Engineering / İnşaat Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/13
Browse
3 results
Search Results
Conference Object Citation - Scopus: 2Experimental Study of the Evolution of the Breach and the Discharge Through the Breach Resulting From Piping Due To Seepage at the Earth-Fill Dam Bottom(Avestia Publishing, 2022) Güney, Mehmet Şükrü; Dumlu, Emre; Okan, Merve; Bor, Aslı; Aklık, Pelin; Tayfur, GökmenPiping is one of the main causes of the earth-fill dam failures. Most of the researchers realizing numerical analyses make some simplified assumptions concerning the shape of the breach and the discharge of water flowing through the breach. The aim of this study is to realize experiments to provide data needed to perform numerical analyses by making more realistic assumptions. The dam having a height of 0.6 m, a bottom width of 2 m and a crest width of 0.20 m is built in a channel 1 m wide, 0.81 m high and 6.14 m long. The evolution of the breach and the discharge through the breach resulting from piping due to seepage at the earth-fill dam bottom was investigated experimentally. The evolution of the dam failure is recorded by six cameras located at different locations. The time-varied of the breach areas at upstream and downstream sides are determined by applying the Gauss Area functions. The discharge of water through the breach and average outflow velocity are determined by using the continuity equation.Article Citation - WoS: 46Citation - Scopus: 53Distorted Physical Model To Study Sudden Partial Dam Break Flows in an Urban Area(American Society of Civil Engineers (ASCE), 2014) Güney, Mehmet Şükrü; Tayfur, Gökmen; Bombar, Gökçen; Elçi, ŞebnemA distorted physical model, based on Ürkmez Dam in Izmir, Turkey, was built to study sudden partial dam break flows. The distorted model had a horizontal scale of 1/150 and a vertical scale of 1/30, containing dam reservoir, dam body, and downstream area-from dam body to Ürkmez urban area until the sea coast. In the model, the reservoir is approximately 12 m3, the dam body has a width of 2.84 m and a height of 1.07 m, and the downstream area is nearly 200 m2. The Ürkmez Dam was chosen because Ürkmez Town is located right at its downstream area, allowing the study of dam break flows in an urban area. Furthermore, the dimensions were suitable such that it allowed the construction of a physical model (dam reservoir, dam body, and downstream area) having a horizontal scale of 1/150 in the available space of 300 m2. The features creating roughness such as buildings, bridge, and roads were also reflected in the physical model. The dam break flow was investigated for sudden partial collapse, which was simulated by a trapezoidal breach on the dam body. The water depths at downstream area were measured at eight different locations by using e+ WATER L (level) sensors. The velocities were measured at four different locations by ultrasonic velocity profiler (UVP) transducers. The propagation of the flood was recorded by a high-defnition camera. The experimental results show that the Ürkmez area can be flooded in a matter of minutes, at depths reaching up to 3 m in residential areas in 4 min. The flood wave front can reach the residential areas in 2 min and to the sea coast in 4 min. Flow velocities can reach 70.9 km/h in sparse residential areas, close to dam body. Away from the dam body in the sparse buildings part of the town, the velocities can reach 27.7 km/h. In dense residential areas of the town, the velocities are too low (2.8 km/h) but flow depths can reach 3 m. Velocity profiles show similar behavior like unsteady and nonuniform open channel flow in nonresidential areas close to the dam body. In residential areas away from the dam body, the velocity profiles are more uniform, having lower velocity values. Vertical variations of velocities show markedly different behavior during rising and recession stages. The profiles are smooth during the rising stage in sparse residential area, yet it shows fluctuating behavior during the recession stage.Article Citation - WoS: 7Citation - Scopus: 9Calculation of the Time-Varying Mean Velocity by Different Methods and Determination of the Turbulence Intensities(Academic Journals, 2010) Bombar, Gökçen; Güney, Mehmet Şükrü; Tayfur, Gökmen; Elçi, ŞebnemThe raw velocity data for both stream-wise and transversal directions in unsteady flows, which are formed by generating input hydrograph, are obtained by using a flow tracker. The same hydrograph is generated 15 times and the mean values are found by calculating the average of all hydrographs. The time varying mean is obtained by using FFT, moving average, wavelet and EMD methods. The best time varying mean is selected according to prescribed criteria. Then, the 15 time series are processed and the stream-wise and transversal turbulence intensities are obtained. The mean of the product of fluctuations is also determined. © 2010 Academic Journals.