Civil Engineering / İnşaat Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/13
Browse
3 results
Search Results
Article Citation - WoS: 7Citation - Scopus: 11Utilization of Membrane Separation Processes for Reclamation and Reuse of Geothermal Water in Agricultural Irrigation of Tomato Plants-Pilot Membrane Tests and Economic Analysis(Elsevier, 2022) Jarma, Yakubu A.; Karaoğlu, Aslı; Senan, Islam Rashad Ahmed; Meriç, Mehmet Kamil; Kukul, Yasemin Senem; Özçakal, Emrah; Barlas, Neriman Tuba; Çakıcı, Hakan; Baba, Alper; Kabay, NalanThe quality of irrigation water is critical for enhancing agricultural productivity. As a result, this research was carried out with the aim of treating spent geothermal water before it is used for agricultural irrigation. While doing that, cost analysis of the system was taken into consideration as well. The product water was targeted to suit irrigation water standards for tomato plants. Two commercially available pressure driven membranes (NF8040-70 as NF membrane and TM720D-400 as RO membrane) were employed for this task. A constant applied pressure of 15 bar and 60% of water recovery were kept constant during the product water production while mode of operation for the membrane system was continuous. According to Turkish Ministry of Environment and Urbanization irrigation water standards and the results obtained from this study, it was clearly seen that both NF and RO product waters meet the quality I class irrigation water standards with respect total dissolved substances (TDS), electrical conductivity (EC), concentrations of Na+ and Cl− ions. Quality 1 means that the produced water will not cause any environmental effect when employed for irrigation purpose. Nevertheless, the produced water was found not to obey the irrigation standards with respect to sodium adsorption ratio (SAR) and boron concentration (quality III class). Quality III explains that the water will cause soil infiltration problems when employed for irrigation purpose. Since most of the minerals needed for plant growth were rejected by NF and RO membranes, an appropriate mixing ratio of the product water with well water for remineralization was determined. Mixing 50 and 60% of well water with the product waters of NF (50%) and RO (40%) membranes, respectively was found to be the optimum mixing ratios to produce the requested water quality for tomato irrigation. Quality II class irrigation water which can be applied with caution was targeted in terms of SAR as well as boron concentration (2–4 and 4–6 mg/L) while determining the mixing ratios. The cost of the product water was found as 0.76 and 1.56$/m3 for NF and RO processes, respectively.Article Citation - WoS: 13Citation - Scopus: 18Integrated Pressure-Driven Membrane Separation Processes for the Production of Agricultural Irrigation Water From Spent Geothermal Water(Elsevier, 2022) Jarma, Yakubu Abdullahi; Karaoğlu, Aslı; Tekin, Özge; Senan, Islam Rashad Ahmed; Baba, AlperThe application of different pressure-driven membranes to treat the spent geothermal water to be used for agricultural irrigation was explored in this study. Firstly, individual performances of different commercially available nanofiltration (NF) and reverse osmosis (RO) membranes attached to a mini-pilot membrane test system were studied. For the single membrane test TR-NF and NF90 as NF membranes and TR-BWRO, Vontrone, TR-SWRO and BW30 as RO membranes were employed while combination of TR-NF with TR-BWRO, Vontrone, TR-SWRO and BW30 was employed in the integrated study (with and without pH adjustment).When performances of individual membranes were investigated, the permeate fluxes obtained it was found that there was no significant flux drop with the experimental time (4 h) in all the studies. In terms of boron removals, boron was partially removed in single membrane study as 22.7–23.6% and 30.6–56.8% by NF and RO membranes, respectively. For the integrated NF + RO membrane configuration (without pH adjustment), boron removals were in the range of 42.1–59.4% while 91.3–95.4% of boron removal was obtained in the integrated NF + RO (at elevated pH). It was found that the produced water complied with class I quality with respect to irrigation water parameters with the exception of boron and sodium adsorption ratio (SAR), while the pH of the product water in the integrated NF + RO study at elevated pH was found to be in class III. Hence, produced water will be suitable (class II) for irrigation if 30% of well water should be blended with the product water in the integrated NF + RO studies (with and without pH adjustment) as well as pH adjustment when necessary.Article Citation - WoS: 58Citation - Scopus: 59Assessment of Different Nanofiltration and Reverse Osmosis Membranes for Simultaneous Removal of Arsenic and Boron From Spent Geothermal Water(Elsevier, 2021) Jarma, Yakubu A.; Karaoğlu, Aslı; Tekin, Özge; Baba, Alper; Ökten, H.Eser; Tomaszewska, Barbara; Kabay, NalanOne of the factors that determine agricultural crops’ yield is the quality of water used during irrigation. In this study, we assessed the usability of spent geothermal water for agricultural irrigation after membrane treatment. Preliminary membrane tests were conducted on a laboratory-scale set up followed by mini-pilot scale tests in a geothermal heating center. In part I, three commercially available membranes (XLE BWRO, NF90, and Osmonics CK- NF) were tested using a cross-flow flat-sheet membrane testing unit (Sepa CF II, GE-Osmonics) under constant applied pressure of 20 bar. In part II, different spiral wound membranes (TR-NE90-NF, TR-BE-BW, and BW30) other than the ones used in laboratory tests were employed for the mini-pilot scale studies in a continuous mode. Water recovery and applied pressure were maintained constant at 60% and 12 bar, respectively. Performances of the membranes were assessed in terms of the permeate flux, boron and arsenic removals. In laboratory tests, the permeate fluxes were measured as 94.3, 87.9, and 64.3 L m?2 h?1 for XLE BWRO, CK-NF and NF90 membranes, respectively. The arsenic removals were found as 99.0%, 87.5% and 83.6% while the boron removals were 56.8%, 54.2%, and 26.1% for XLE BWRO, NF90 and CK-NF membranes, respectively. In field tests, permeate fluxes were 49.9, 26.8 and 24.0 L m?2 h?1 for TR-NE90-NF, BW30-RO and TR-BE-BW membranes, respectively. Boron removals were calculated as 49.9%, 44.1% and 40.7% for TR-BE-BW, TR-NE90-NF and BW30-RO membranes, respectively. Removal efficiencies of arsenic in mini-pilot scale membrane tests were all over 90%. Quality of the permeate water produced was suitable for irrigation in terms of the electrical conductivity (EC) and the total dissolved solids (TDS) for all tested membranes with respect to guidelines set by the Turkish Ministry of Environment and Urbanisation (TMEU). However, XLE BWRO, CK-NF and NF90 membranes failed to meet the required limits for irrigation in terms of boron and arsenic concentrations in the product water. The permeate streams of TR-BE-BW, TR-NE90-NF and BW30-RO membranes complied with the irrigation water standards in terms of EC, TDS and arsenic concentration while boron concentration remained above the allowable limit. © 2020 Elsevier B.V.