Civil Engineering / İnşaat Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/13
Browse
9 results
Search Results
Article Citation - WoS: 6Citation - Scopus: 6Calibration and Verification of Century Based Wave Climate Data Record Along the Turkish Coasts Using Satellite Altimeter Data(Elsevier Ltd., 2020) Özbahçeci, Bergüzar; Turgut, Ahmet Rıza; Bozoklu, Ahmet; Abdalla, S.In order to produce consistent reanalysis of the climate system, ECMWF (The European Centre for Medium-Range Weather Forecasts) has produced firstly an uncoupled atmospheric reanalysis ERA-20C, and then a coupled climate reanalysis, called CERA-20C, which covers the period January 1900 to December 2010. Both data sets are available at 3-hour time increments. Such a century long data can be an alternative to calculate the extreme waves corresponding to low probability of occurrences without extrapolation of extreme value statistics’ results which may contribute to the error in the estimation of design waves in case of small number of wave data. In this study, main purpose is to calibrate and verify the century-based wave data in order to derive the longest and the consistent wave data along the Turkish coasts as a first time to be used in the extreme wave analysis. For this purpose, first of all, significant wave height data of ERA-20C and CERA-20C are compared by using ENVISAT data over the whole Black Sea for 2007–2008 as a pilot study. Comparison results show that both datasets give similar results but CERA-20C seems to be better in terms of statistical error measures. Then CERA-20C significant wave height data are calibrated using satellite Radar Altimeter data set. Jason family of satellites (TOPEX, Jason-1 and 2) and Envisat family of satellites (ERS-2 and Envisat) are inter-calibrated to get the consistent satellite data sets with a total duration of 18 years (1995–2012) for Envisat family and 26 years (1992–2017) for Jason family in order to be used in calibration of CERA-20C wave height. The mean wave period is also estimated from RA backscatter coefficients (Ku and C bands) and the significant wave height by using Artificial Neural Network Method. Then the estimated mean wave periods are used for the calibration of CERA-20C wave period. Calibrated CERA-20C data are compared with in-situ measurements for the verification purposes. Results of verification study show that the calibrated CERA-20C wave data agree well with the in-situ measurements in terms of Quantile-Quantile analysis with lower deviations from y = x line and capture the largest sea states. In fact, CERA-20C, century-based wave data become appropriate to determine the extreme waves to be used in the design of coastal structures along the Turkish coasts. © 2020 COSPARArticle Citation - WoS: 40Citation - Scopus: 44Geological and Hydrogeochemical Properties of Geothermal Systems in the Southeastern Region of Turkey(Elsevier Ltd., 2019) Baba, Alper; Şaroğlu, Fuat; Akkuş, I.; Özel, Nedret; Yeşilnacar, Mehmet İrfan; Nalbantçılar, Mahmut Tahir; Demir, Mustafa Muammer; Gökçen, Gülden; Arslan, Ş.; Dursun, N.; Uzelli, Taygun; Yazdani, HamidrezaThe Anatolia region is one of the most seismically active regions in the world. It has a considerably high level of geothermal energy potential thanks to its geological and tectonic settings. The Southeastern Anatolia Region (GAP) is located in the south of Bitlis-Zagros Suture Zone (BZSZ) which is in the Arabian foreland. During the neotectonic period, the folded structures have been developed under the influence of tectonic compression from the Upper Miocene in the GAP Region where it is closely related to active tectonics. These tectonic activities produce more geothermal resources. Few studies have been carried out in this region for geothermal energy. Limited portions of the geothermal resources have been used both for thermal tourism and greenhouses in the GAP region. The aim of this study is to determine geological, tectonic and hydrogeochemical properties of a geothermal system in the GAP Region. The result indicates that the surface temperatures of geothermal fluids are from 20 to 84.5 °C A large number of abandoned oil wells, whose temperature reaches 140 °C, are found in the region. Also, hydrogeochemical results show that deep circulated geothermal fluids are enriched with Na-Cl and shallow geothermal system fluids have Na−HCO 3 and Ca-SO 4 characters because of cold water mixing and water-rock interaction. Cold waters are generally of Ca-Mg−HCO 3 and Ca−HCO 3 type. Cation geothermometers were used for determining reservoir temperature of the geothermal resources in the region. The results show that the reservoir temperature of these geothermal resources ranges from 50 °C to 200 °C. The isotope data (oxygen-18, deuterium and tritium) suggests that geothermal fluid is formed by local recharge and deep circulation.Article Citation - WoS: 13Citation - Scopus: 16The Injection of Co2 To Hypersaline Geothermal Brine: a Case Study for Tuzla Region(Elsevier Ltd., 2019) Topçu, Gökhan; Koç, Gonca A.; Baba, Alper; Demir, Mustafa MuammerScaling is a serious issue for geothermal power plants since it remarkably decreases the harvesting of energy. The reduction of pH by organic acids whose structure is close to CO2 for instance formic acid has been an effective solution for the minimization of scaling. Herein, the effect of CO2 injection on the formation of scaling particularly metal-silicates was investigated for the model case of Tuzla Geothermal Field (TGF) located in the northwest of Turkey. CO2 has an acidic character in aqueous systems because it leads to the formation of carbonic acid. The injection of 20.6 m3/s CO2 (approximately 88 ppm) to hypersaline brine of TGF is a promising green approach for both mitigation of scaling by reducing pH from 7.2 to 6.2 at the well-head and the minimization of potential corrosion compared to the use of formic acid (55 ppm).Article Citation - WoS: 21Citation - Scopus: 27Increasing Solubility of Metal Silicates by Mixed Polymeric Antiscalants(Elsevier Ltd., 2019) Topçu, Gökhan; Çelik, Aslı; Kandemir, Ali; Baba, Alper; Şahin, Hasan; Demir, Mustafa MuammerThe increase of silicate solubility is a big challenge for both hot and cold water because it reduces the deposition of metal silicates frequently observed in such systems and causes operational obstacles. The deposition of silicate coats the inner surface of the pipelines in an uncontrolled manner and reduces the harvesting of energy from brines. In this work, the solubility performance of two commercial water-soluble polymeric agents (poly(ethylene glycol) (PEG) and poly(vinyl alcohol) (PVA)) of various molecular weights employing dosage from 25 to 100 mg/L was examined. Along with dispersant-type antiscalant, poly(acrylamide) (PAM), poly(vinylsulfonic acid, sodium salt) (PVSA), and poly(vinylphosphonic acid) (PVPA) having chelating acidic groups were employed. Metal silicate deposits were obtained artificially in the lab-scale pressurized reactor. The experimental conditions employed were quite similar to a model power plant located in Çanakkale, Turkey. The concentration of dissolved silica was increased from 130 to 420 mg/L when 100 mg/L PEG 1500 and 25 mg/L PVSA were employed as a mixture. For the atomic-level understanding of the interaction of chelating groups with metal cations, DFT calculations were performed too.Article Citation - WoS: 18Citation - Scopus: 15Thermal Fluid Circulation Around the Karliova Triple Junction: Geochemical Features and Volcano-Tectonic Implications (eastern Turkey)(Elsevier Ltd., 2019) Baba, AlperThe Karlıova triple junction (KTJ) in eastern Turkey has been subjected to incremental deformation resulting in complex kinematic and mechanical interactions throughout the upper crust. These interactions have generated tectonic inversions and uplift, extensive seismicity and volcanism. The regional tectonics generate local stresses, some of which are favorable to magma transport and thermal water circulation throughout the lithosphere. Here we evalauate hydrogeochemical, geological and numerical results relating to the mechanism of thermal fluid circulation around the KTJ. Hydrogeochemistry of the samples indicates that the thermal water springs are probably heated by steam. Volcanic rocks at the site appear to be the host rock owing to the enrichment of Na+ and Cl− ions in water and the abundance of these elements in minerals of the volcanic rocks. In addition, it is clear that the thermal fluids are sourced from depth and migrate through permeable networks of faults. The effects of crustal heterogeneities, in particular the geometry and mechanical properties of many faults and layers, on thermal fluid circulation in relation to active magma chambers were investigated under a variety of different mechanical conditions. The numerical results indicate very close relationships between the stress field causing faulting and thermal fluid movement in the KTJ. The effect of thermal transfer was modeled with depth throughout the crust and along the the crustal surface. The models show that some faults encourage thermal fluid circulation below the Varto and Özenç volcanoes. Hydrogeochemical, geological and numerical results suggest that magmas residing beneath both the Varto caldera and the Özenç volcano are the main heat source for thermal fluid in the Varto region. Fluid-solid interactions and fluid circulation models show that the permeable faults are important factors affecting heat transport and fluid circulation. In a series of thermal fluid flow models we probe the mechanism for fluid and gas transport from the 900 °C ‘hot’ zone around the deep magma chambers and investigate how heat is lost throughout the crust on the way to the surface and so eventually creates water channels of temperatures between 50 to 60 °C.Article Citation - WoS: 13Citation - Scopus: 16Experimental Modeling of Silicate-Based Geothermal Deposits(Elsevier Ltd., 2017) Çelik, Aslı; Topçu, Gökhan; Baba, Alper; Akdoğan, Yaşar; Şentürk, Ufuk; Demir, Mustafa MuammerScaling by metal silicates represents a major obstacle for geothermal systems. A composition that enables the fabrication of artificial deposits is necessary for the rapid testing of potential inhibitors. In this work, artificial deposits were synthesized by employing experimental conditions similar to those in the Tuzla Geothermal Field in Turkey. Although refluxing enabled the formation of a precipitate that was similar to naturally formed deposits in color and texture, their elemental composition and morphology showed a mismatch. An autoclave enabled the production of a precipitate that more closely resembled naturally formed deposits in color, texture, elemental composition, and structure.Article Citation - WoS: 26Citation - Scopus: 25Conceptual Model of the Gülbahçe Geothermal System, Western Anatolia, Turkey: Based on Structural and Hydrogeochemical Data(Elsevier Ltd., 2017) Uzelli, Taygun; Baba, Alper; Mungan, Gamze Gül; Dirik, Ramazan Kadir; Sözbilir, HasanThe Gülbahçe Geothermal Field is located on the eastern margin of the Karaburun Peninsula, about 45 km from the city of İzmir, western Anatolia, Turkey. The stratigraphy of the study area is represented by a Miocene volcano-sedimentary succession, including several sedimentary and volcanic units. These units overlie the basement rocks of the Karaburun Platform and Bornova Flysch Zone which consist of sandstones, shales and carbonate blocks. These rock units are cut and deformed by a series of NW-SE- to NE-SW-trending faults, extending from Sığacık Bay to Gülbahçe Bay. Structural studies suggest that while most of the geothermal systems in western Anatolia are controlled by normal faults, the geothermal system at Gülbahçe is controlled by a strike-slip dominated shear zone, previously named the İzmir-Balıkesir Transfer Zone. Along the fault zone, associations of active fault segments accommodate deep circulation of hydrothermally modified sea water, and thus the resulting negative flower structure is the primary control mechanism for the geothermal system. Hydrogeochemical properties of the field show that surface temperature of fluid ranges from 30 to 34 °C. Geothermal fluids in Gülbahçe have high salinity (EC > 34 mS/cm) and low enthalpy. Piper and Schoeller diagrams indicate that geothermal fluid is in the NaCl facies. Chemical geothermometers suggest that the reservoir temperature is around 53–136 °C. The isotopic data (oxygen-18, deuterium and tritium) suggest that geothermal fluids are formed by local recharge and deep circulation of sea water.Article Citation - WoS: 53Citation - Scopus: 63Artificial Neural Network (ann) Prediction of Compressive Strength of Vartm Processed Polymer Composites(Elsevier Ltd., 2005) Seyhan, Abdullah Tuğrul; Tayfur, Gökmen; Karakurt, Murat; Tanoğlu, MetinA three layer feed forward artificial neural network (ANN) model having three input neurons, one output neuron and two hidden neurons was developed to predict the ply-lay up compressive strength of VARTM processed E-glass/ polyester composites. The composites were manufactured using fabric preforms consolidated with 0, 3 and 6 wt.% of thermoplastic binder. The learning of ANN was accomplished by a backpropagation algorithm. A good agreement between the measured and the predicted values was obtained. Testing of the model was done within low average error levels of 3.28%. Furthermore, the predictions of ANN model were compared with those obtained from a multi-linear regression (MLR) model. It was found that ANN model has better predictions than MLR model for the experimental data. Also, the ANN model was subjected to a sensitivity analysis to obtain its response. As a result, the ANN model was found to have an ability to yield a desired level of ply-lay up compressive strength values for the composites processed with the addition of the thermoplastic binder.Article Citation - WoS: 35Citation - Scopus: 45Types of the Scaling in Hyper Saline Geothermal System in Northwest Turkey(Elsevier Ltd., 2014) Demir, Mustafa Muammer; Baba, Alper; Atilla, Vedat; İnanlı, MustafaTuzla is an active geothermal area located in northwestern Turkey, 80km south of the city of Canakkale and 5km from the Aegean Coast. The geothermal brine from this area, which is dominated by NaCl, has a typical temperature of 173°C. Rapid withdrawal of fluid to ambient surface conditions during sampling causes precipitation of various compounds known as scaling. Scaling is one of the important problems in Tuzla geothermal system that reduces the efficiency of the geothermal power plant and causes economical loss. The aim of this study was to determine the type of scaling as a first step towards preventing its formation. The scales formed in the geothermal system were divided into two groups according to location: the ones that formed in downhole and the ones that accumulated along the surface pipeline. Both scales were examined in terms of their elemental composition, structure and morphology using XRF, XRD, and SEM, respectively. The former was found to be mainly composed of PbS (Galena) and CaCO3 (aragonite or calcite). In contrast, the latter was heterogeneous in nature and consisted of mainly saponite like amorphous structure along with submicrometer-sized amorphous silica particles, layered double magnesium and iron hydroxide, and NaCl.