WoS İndeksli Yayınlar Koleksiyonu / WoS Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7150
Browse
75 results
Filters
Settings
Search Results
Book Part Citation - WoS: 1Citation - Scopus: 1A Historical Review of Polyhedral Linkages(Springer, 2024) Kiper, GökhanPolyhedral linkages are linkages that resemble polyhedral shapes at different configurations. This paper summarizes the necessary geometrical fundamentals of polyhedral geometry and presents a historical and critical review of the polyhedral linkage designs available in the literature. Basic definitions of polyhedral geometry and operations are needed to comprehend and design polyhedral linkages. First, early works on polyhedral linkages are presented, where flexible polyhedra with rigid faces and flexible edges are issued. The final part is reserved to conformal polyhedral linkages, which go through shape transformations while plane, dihedral and solid angles are preserved. Conformal polyhedral linkages are examined in four categories: 1) Jitterbug-like linkages with screwing polygonal links connected to each other with dihedral angle preserving links, 2) polyhedral linkages with planar kinematic chains in radial motion planes, 3) polyhedral linkages with planar kinematic chains on faces, that are connected to each other with dihedral angle preserving links, and 4) other conformal polyhedral linkages. © The Author(s), under exclusive license to Springer Nature Switzerland AG 2024.Data Paper Citation - WoS: 15Citation - Scopus: 20Database Covering the Prayer Movements Which Were Not Available Previously(Nature Publishing Group, 2023) Mihçin, Şenay; Şahin, Ahmet Mert; Yılmaz, Mehmet; Alpkaya, Alican Tuncay; Tuna, Merve; Akdeniz, Sevinç; Can, Nuray Korkmaz; Tosun, Aliye; Şahin, SerapLower body implants are designed according to the boundary conditions of gait data and tested against. However, due to diversity in cultural backgrounds, religious rituals might cause different ranges of motion and different loading patterns. Especially in the Eastern part of the world, diverse Activities of Daily Living (ADL) consist of salat, yoga rituals, and different style sitting postures. A database covering these diverse activities of the Eastern world is non-existent. This study focuses on data collection protocol and the creation of an online database of previously excluded ADL activities, targeting 200 healthy subjects via Qualisys and IMU motion capture systems, and force plates, from West and Middle East Asian populations with a special focus on the lower body joints. The current version of the database covers 50 volunteers for 13 different activities. The tasks are defined and listed in a table to create a database to search based on age, gender, BMI, type of activity, and motion capture system. The collected data is to be used for designing implants to allow these sorts of activities to be performed.Conference Object Citation - WoS: 3Citation - Scopus: 3Experimental Evaluation of the Success of Peg-In Tasks Learned From Demonstration(IEEE, 2022) Argüz, Serdar Hakan; Ertuğrul, Şeniz; Altun, KeremIndustrial robots are traditionally programmed by hard-coding the desired motion into them. That approach, however, costs significant time and effort and shows little to no promise in transferring human skills to robots. Programming by demonstration (PbD) is an alternative approach that allows robots to learn tasks from demonstrations. Because of its several advantages over the traditional method, PbD is particularly suited for tasks encountered in assembly operations, the most typical of which is the peg-in-hole task. A successful PbD implementation for a peg-in-hole task requires that the peg should still be inserted into the hole even under situations that are not encountered during the demonstrations. Previous research in the field shows that the success rate of a peg-in-hole task under such cases varies greatly. In this study, we use a UR5 manipulator to experimentally investigate how the success rate of a peg-in-hole task changes with respect to the novelty of the task, quantified in terms of the distance of the hole to its original position. It is found that the success ratio decreases as the novelty of the task increases. To increase the performance, the use of strategies that alter the robot's motion dynamically in the run time is suggested for future work.Article Citation - WoS: 5Citation - Scopus: 6Active Heat Transfer Enhancement by Interface-Localized Liquid Dielectrophoresis Using Interdigitated Electrodes(Elsevier, 2022) Yenigün, Onur; Barışık, MuratWe introduced an active heat transfer control between graphene and water using interdigitated electrodes (IDEs). Oppositely charged co-planer electrodes embedded on a graphene surface created a non-uniform electric field. Resulted interface localized liquid dielectrophoresis (LDEP) perpendicular to surface enhanced the water/graphene coupling and decreased interfacial thermal resistance (ITR) substantially. We correlated the theoretical calculations of average electric field strength near surface with Kapitza values measured at corresponding electrode configurations. We obtained a unified linear variation of Kapitza as a function of average electric strength independent of electrode size and charge. By increasing the electric field strength, we measured up to 96% decrease of Kapitza near electrodes. Since the IDEs generated electric field was only interface localized, it required lower electrode charges than any parallel-plate capacitor systems. We showed that ITR remains effective in heat transfer behavior for systems as big as 100nm such that interface localized electric field can at least increase the heat removal 50% by eliminating the ITR from both graphene/water interfaces of a channel system. By converting hydrophobic few-layer graphene to super-hydrophilic condition with ultra-low Kapitza, current results are important for graphene-based materials considered for the solution of the thermal management problem of current and next generation micro/nano-electronics.Conference Object A sustainable association case study: IFToMM member organization Turkey(Springer, 2022) Kiper, Gökhan; Söylemez, EresAs a member of IFToMM founded in 2011, Turkish Machine Theory Association’s (MakTeD) structure has put special emphasis on sustainability of the association and initiated several activities for improving the quality of education and research in mechanism and machine science area, hence supporting the SDG4 Quality Education of the UN. This paper presents the activities and methodologies of MakTeD. The paper starts with a brief history of mechanism and machine science in Turkey. In 10 years MakTeD organized 4 symposiums, 1 conference, 4 summer/winter schools, 8 workshops and hosted an IFToMM Executive Council meeting. Each chapter of the biyearly held National Symposium on Theory of Machines is held by a different university and especially newly established and the universities in relatively smaller cities are prioritized in order to promote those universities and to contribute to development of these universities. Especially the summer/winter schools and workshops have a widespread impact on mechanism and machine science education and research at the universities and institutions. MakTeD also contributes to the community with published books and support programs for young researchers.Conference Object Digital Twin of a Servo Driver of a Servo Motor as a First Step Towards a Digital Twin of a Robot Mechanism(Springer, 2022) Küçükoğlu, Sefa Furkan; Carbone, Giuseppe; Dede, Mehmet İsmet CanDigital Twin (DT) offers us to acquire actual system’s critical information and hence, it may be possible to develop and produce more suitable systems in terms of low energy consumption and effectiveness. In this way, responsible consumption and production systems can be designed and the system’s parameters can be tuned via DT. In this study, the model of a servomotor system that is used for industrial purposes is experimentally obtained. This study consists of two steps. In the first step, within the embedded control of the system, position and velocity control loops are deactivated. Then through the servo driver, currents with sinusoidal waveforms at various frequencies are applied to the servomotor. The resultant angular velocity of the motor is monitored and recorded. The amplitude of the current is kept constant during this study. The frequency of the current, however, is increased logarithmically. By using these data, a first-order transfer function (TF) is identified for the motor model. In the second step, all control loops are activated. Consequently, the total servomotor system could be represented in a digital environment. Furthermore, the static friction issue is overcome by using a Coulomb friction model with stiction effect. Finally, several experiments are conducted and then results are compared with the digital model of the servomotor system. The results clearly show that digital model can fairly represent the physical system.Conference Object Üst Ekstremite Hareket Kabiliyeti Değerlendirmesi için Yeni Bir Sistem Tasarımı(IEEE, 2020) Çizmecioğulları, Serkan; Mihçin, Şenay; Akan, Aydın; Koçak, Mertcan; Tosun, AliyeÜst ekstremite fonksiyon değerlendirilmesinde kullanılan yöntemlerden birisi de Eklem Hareket Açıklığı (EHA) ölçümleridir. Günümüzde bu ölçümler klinisyenin gözlemsel değerlendirmesine ve/veya gonyometrik ölçümlere dayanmaktadır. Bu ölçümlerde tekrarlanabilirlik ve güvenilirlik açısından problemler mevcuttur. Bu çalışmada üst ektremitede EHA ölçümlerinin sayısal değerlendirilmesine bağlı olarak objektif çıkarımlar yapılmasını sağlayabilecek tek kameralı bir sistem önerilmiştir. Bireylerin omuz ve dirsek fleksiyonu hareketleri kaydedilmiştir. Eş zamanlı olarak “Altın Standart” olarak OptiTrack sistemi ile de yapılan hareketler kayıt altına alınmıştır ve analiz edilmiştir. Çalışmaya 9 erkek ve 9 kadın birey katılmıştır. Hareketlerin kaydedilmesi için Kinect kamera kullanılmıştır. Kinect kamera OptiTrack sistemi ile karşılaştırılmıştır. Omuz ve dirsek fleksiyonu açıları her iki sistem ile hesaplanmıştır. Hesaplanan açılar kullanılarak her iki sistemin uyumu istatiksel olarak incelenmiştir. Bland- Altman yöntemi kullanılarak yapılan analizlerde hem erkek hem de kadın bireylerde omuz fleksiyonu ve dirsek fleksiyonu hareketleri açısından %95 güven aralığında her iki kameranın birbiriyle uyumlu olduğu tespit edilmiştir. Bu çalışma önerilen sistemin klinik tanı için güvenirliğine dair delil teşkil etmektedir.Conference Object Citation - WoS: 1Citation - Scopus: 2Parametric Analysis for the Design of Hip Joint Replacement Simulators(IEEE, 2021) Torabnia, Shams; Mihçin, Şenay; Lazoğlu, İsmailThe simulation of wear, between the components of artificial hip joint implants, is a complicated problem that does not have a robust analytical answer yet. Many studies have been conducted to predict the wear between the femur head and the acetabular cup, as the debris generated due to the wear might produce adverse effects after the surgery. Hip joint simulators provide a means to quantify the amount of wear in preclinical settings, as an in vitro method. However, this brings some other challenges in terms of bio-fidelity. The simulators use force and range of motion data as input and provide wear information as an output. For this reason, it is important to be able to simulate the realistic conditions, by the proper transmission of force and position controlling of the components. Many studies performed on wear simulators but none of them worked on the machine parameters such as power consumption and sensitivity to external inputs in detail. In this study, we perform a sensitivity analysis of the factors affecting the forces acting on the femur head. In silico simulations were performed by changing the values of acting force, friction coefficient, and radius of femur head to understand the effects of each parameter on the frictional moment of the joint. These analyses demonstrate the importance of using correct parameters while designing simulators, which accept flexible boundary conditions. The architecture of the hip simulator was also investigated for the first time. The results are expected to pave the way for improving the bio-fidelity of the simulators in the field of biomechanics. © 2021 IEEE.Conference Object Heat Load Factor for Geothermal District Heating System Design(National Technical University of Athens, 2006) Yıldırım, Nurdan; Gökçen, GüldenDesign of heating systems using conventional fuels is based on peak load which is calculated according to the coldest outdoor design temperature. But in geothermal district heating system design it is common practice to use a heat load factor between 0.6-0.7 since the resource is continues, cheap and system can be run for 24 hours a day. Heat load factor can be defined as a ratio of actual heat load to design heat load of the system. In this study, a geothermal district heating system is designed for Izmir Institute of Technology Campus, Izmir, Turkey and simulated for a heat load factor range of 0.5-1. For the Campus case, the heat load factor is determined as 0.53-0.0.67 based on indoor air temperature and operational cost.Conference Object Citation - WoS: 3Citation - Scopus: 3Co-Sintering Behaviors of Oxide Based Bi-Materials(American Ceramic Society, 2010) Carry, Claude; Yalamaç, Emre; Akkurt, SedatBi-materials have attracted attention due to combination of properties that such structures can offer. A strong bond between two co-sintered oxide ceramics can provide novel properties. This study focused on the densification and the microstructural evolution during co-sintering of alumina (Al2O3)zirconia (Y-ZrO2) and alumina-spinel (MgAl2O4) bi-materials, produced by co-pressing of powders. High purity submicron powders were uniaxially pressed or co-pressed (150 or 250 MPa). The sintering behaviors of mono and bi-material bodies were investigated using a vertical dilatometer under constant heating rate conditions (from 1 to 10 degrees C/min up to 1580 degrees C). Microstructural characterizations focused on the interface and diffusion layers of bonded bi-materials. Best bonding without cracks were observed on alumina-spinel bi-materials. Macroscopic and microscopic observations are analyzed, interpreted and discussed considering shrinkage and thermal expansion mismatches, residual stresses, diffusion kinetics and oxide phase diagrams.