WoS İndeksli Yayınlar Koleksiyonu / WoS Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7150
Browse
Search Results
Now showing 1 - 10 of 12
Article Citation - WoS: 1Citation - Scopus: 1Thermodynamic Re-Assessment of a Geothermal Binary Power Plant Operated in a Moderate-Temperature Geothermal Field(Inderscience, 2023) Özcan, Zeynep; Gökçen Akkurt, GüldenAn existing organic rankine cycle power plant which uses isobutane as working fluid is re-evaluated for different working fluids. The plant is first modelled by EES software; then the model is simulated for different working fluids obtaining heat transferred through the heat exchanger, net work output, energy and exergy efficiencies, and mass flowrate of the working fluid. Two parametric studies are conducted to evaluate the thermodynamic performance of the plant under a range of turbine inlet temperature (130°C–155°C) and geothermal resource temperature (152°C–161°C) for each working fluid. The study reveals that the highest cycle energy and exergy efficiencies are observed for R-152a at any geothermal resource temperature. R-152a resulted with 13.1% and 58.2% cycle energy and exergy efficiency, respectively at operation condition, whilst the lowest efficiency and net work output is calculated under n-butane presence.Article Citation - WoS: 2The Effect of the Temperature of Heat Treatment Process and the Concentration and Duration of Acid Leaching on the Size and Crystallinity of Nano-Silica Powders Formed by the Dissociation of Natural Diatom Frustule(American Scientific Publishers, 2022) Ülker, Sevkan; Güden, MustafaThe present study focused on the processing of nano-silica powders in varying sizes and crystallinities through IP: 846247.10 On: Wed, 14 Dec 2022 07:29:25 heat treatment (900-1200 degrees C), hydrofluoric acid leaching (1-7 N), and ball milling (1 h, 500 rpm) of natural Copyright American Scentfic P blishers diatom frustules. The starting natural frustules were determined to be composed of amorphous silica (88%) Delivered by Ingenta and quartz. The partially ordered crystalline low-quartz and or precursor to low-cristobalite started to form at-900 degrees C. As the heat treatment temperature increased, the crystallinity of the frustules increased from 9.3% at 25 degrees C to 46% at 1200 degrees C. Applying a ball milling reduced the mean particle sizes of the as-received and heat-treated frustules from 15.6-13.7 mu m to 7.2-6.7 mu m, respectively. Acid leaching of the as-received and heat-treated frustules resulted in a further increase in the crystallinity. Furthermore, a ball milling applied after an acid leaching was very effective in reducing the particle size of the as-received and heat-treated frustules. The mean particle size of the acid-leached frustules decreased to 774-547 nm with a crystallinity varying between 12 and 48% after ball milling. A partially dissolved amorphous phase was observed in between crystalline silica grains after acid leaching, which resulted in a rapid fracture/separation of the frustules in ball milling.Article Citation - WoS: 1Citation - Scopus: 1Exploring the Heterogeneity of Ige-Mediated Food Allergy Through Latent Class Analysis(S. Karger AG, 2022) Akarsu, Ayşegül; Öksel Karakuş, Ceyda; Ocak, Melike; Oral, Nihan; Bilgi, Eyüp; Şahiner, Ümit Murat; Soyer, Özge; Şekerel, Bülent EnisIntroduction: Food allergy (FA) is a heterogeneous disease with multiple morbidities and a huge burden for patients and healthcare systems. Variable manifestations, comorbidities (atopic dermatitis [AD], asthma, and/or allergic rhinitis [AR]), severity (anaphylaxis), and outcomes suggest the existence of different endotypes that cluster analyses may reveal. In this study, we aimed to investigate distinct subgroups among patients with FAs using data from 524 children/adolescents. Methods: 524 patients with IgE-mediated FA (353 male [67%]; median age 4.4 years [IQR:3.0-6.8]), 354 (68%) had multiple FA. The history of AD, asthma, AR, and anaphylaxis was recorded in 59.4%, 35.5%, 24.2%, and 51.2% of the patients, respectively. Latent class analysis was carried out to distinguish clinical FA phenotypes using five potential markers of allergy severity (single/multiple FA, never/inactive/current asthma and AD, AR, and anaphylaxis). Results: Three distinct phenotypes were identified: (1) multiple FA with eczema and respiratory multimorbidity (42%), (2) multiple FA with persistent eczema (34%), and (3) single FA with respiratory multimorbidity without eczema (24%). Compared with the single FA cluster, the prevalence of AD was significantly higher in multiple FA groups. Cluster 1 had the highest frequency of AR and allergic asthma, and the lowest rate of total tolerance of FA. Discussion: We put forward the hypothesis of underlying pathogenesis according to the clinical phenotypes. While skin barrier defect may play a dominant role in the pathogenesis in Cluster 2, immune dysregulation may be dominant in Cluster 3. In Cluster 1, the most severe group, a combination of both skin barrier defects and immune dysregulation may be responsible for the clinical features.Article Enabling Personalization of a Robotic Surgery Procedure Via a Surgery Training Simulator(Cambridge University Press, 2022) Dede, Mehmet İsmet Can; Büyüköztekin, Tarık; Hanalıoğlu, Şahin; Işıkay, İlkay; Berker, MustafaAlthough robotic or robot-assisted surgery has been increasingly used by many surgical disciplines, its application in cranial or skull base surgery is still in its infancy. Master-slave teleoperation setting of these robotic systems enables these surgical procedures to be replicated in a virtual reality environment for surgeon training purposes. A variety of teleoperation modes were previously determined with respect to the motion capability of the surgeon's hand that wears the ring as the surgeon handles a surgical tool inside the surgical workspace. In this surgery training simulator developed for a robot-assisted endoscopic skull base surgery, a new strategy is developed to identify the preferred motion axes of the surgeon. This simulator is designed specifically for tuning the teleoperation system for each surgeon via the identification. This tuning capability brings flexibility to adjust the system operation with respect to the motion characteristics of the surgeon.Article Citation - WoS: 84Citation - Scopus: 82Topological Engineering of Terahertz Light Using Electrically Tunable Exceptional Point Singularities(American Association for the Advancement of Science, 2022) Ergöktaş, M. Said; Soleymani, Sina; Kakenov, Nurbek; Wang, Kaiyuan; Smith, Thomas B.; Bakan, Gökhan; Balcı, Sinan; Principi, Alessandro; Novoselov, Kostya S.; Özdemir, Şahin K.; Kocabaş, ÇoşkunThe topological structure associated with the branch point singularity around an exceptional point (EP) can provide tools for controlling the propagation of light. Through use of graphene-based devices, we demonstrate the emergence of EPs in an electrically controlled interaction between light and a collection of organic molecules in the terahertz regime at room temperature. We show that the intensity and phase of terahertz pulses can be controlled by a gate voltage, which drives the device across the EP. Our electrically tunable system allows reconstruction of the Riemann surface associated with the complex energy landscape and provides topological control of light by tuning the loss imbalance and frequency detuning of interacting modes. Our approach provides a platform for developing topological optoelectronics and studying the manifestations of EP physics in light-matter interactions.Article Generating Plan Layouts: a Case Study on Visualization of Implicit Knowledge by “doctor Architects”(SAGE Publications, 2022) Kasalı, AltuğAim: This article presents an opportunistic case with particular focus on instances from an extended procurement operation in which medical professionals run a proactive process involving the generation of layouts through distinct modes of representational practices without any actual collaboration with designers. The questions of inquiry involve an analysis on how the visualizations came into being and a discussion into the content of drawings that was shaped by individuals without any formal design education. Background: Although the literature introduces examples of genuine participation, particularly in healthcare design practices, the instances in which nondesigners demonstrate accomplished skills in spatial reasoning and representation are limited. Method: The research was formulated as a qualitative case study including a series of observations of the activities of the participants followed by interviews recorded at different locations. The investigation also focuses on the features of these authentic graphics which illustrate the intentions of the medical professionals concerning the function of spaces. Results: In this research, the participants went through a labor intensive and elaborate effort to produce “architectural representations” with the intention to convey their implicit professional expertise in the domain. The layouts were introduced to be the vital elements to visualize the implicit knowledge regarding the functioning of space. Conclusions: The productive and creative engagement of clinicians within this research makes the case for a multidisciplinary approach that reframes the limits and potential contributions of participants alongside drawings, which are exclusively claimed by and strategically employed by architects as negotiation devices within participatory design processes.Article Citation - WoS: 1Citation - Scopus: 1Fatigue Life Prediction and Optimization of Gfrp Composites Based on Failure Tensor Polynomial in Fatigue Model With Exponential Fitting Approach(SAGE Publications, 2022) Güneş, Mehmet Deniz; İmamoğlu Karabaş, Neslişah; Deveci, Hamza Arda; Tanoğlu, Gamze; Tanoğlu, MetinIn this study, a new fatigue life prediction and optimization strategy utilizing the Failure Tensor Polynomial in Fatigue (FTPF) model with exponential fitting and numerical bisection method for fiber reinforced polymer composites has been proposed. Within the experimental stage, glass/epoxy composite laminates with (Formula presented.), (Formula presented.), and (Formula presented.) lay-up configurations were fabricated, quasi-static and fatigue mechanical behavior of GFRP composites was characterized to be used in the FTPF model. The prediction capability of the FTPF model was tested based on the experimental data obtained for multidirectional laminates of various composite materials. Fatigue life prediction results of the glass/epoxy laminates were found to be better as compared to those for the linear fitting predictions. The results also indicated that the approach with exponential fitting provides better fatigue life predictions as compared to those obtained by linear fitting, especially for glass/epoxy laminates. Moreover, an optimization study using the proposed methodology for fatigue life advancement of the glass/epoxy laminates was performed by a powerful hybrid algorithm, PSA/GPSA. So, two optimization scenarios including various loading configurations were considered. The optimization results exhibited that the optimized stacking sequences having maximized fatigue life can be obtained in various loading cases. It was also revealed that the tension-compression loading and the loadings involving shear loads are critical for fatigue, and further improvement in fatigue life may be achieved by designing only symmetric lay-ups instead of symmetric-balanced and diversification of fiber angles to be used in the optimization.Article Citation - WoS: 3Citation - Scopus: 5Physically Unclonable Security Patterns Created by Electrospinning, and Authenticated by Two-Step Validation Method(IOP Publishing, 2022) Taşcıoğlu, Didem; Atçı, Arda; Sevim Ünlütürk, Seçil; Özçelik, SerdarCounterfeiting is a growing economic and social problem. For anticounterfeiting, random and inimitable droplet/fiber patterns were created by the electrospinning method as security tags that are detectable under UV light but invisible in daylight. To check the authenticity of the original security patterns created; images were collected with a simple smartphone microscope and a database of the recorded original patterns was created. The originality of the random patterns was checked by comparing them with the patterns recorded in the database. In addition, the spectral signature of the patterns in the droplet/fiber network was obtained with a simple and hand-held spectrometer. Thus, by reading the spectral signature from the pattern, the spectral information of the photoluminescent nanoparticles was verified and thus a second-step verification was established. In this way, anticounterfeiting technology that combines ink formula, unclonable security pattern creation and two-level verification is developed.Article Citation - WoS: 1Citation - Scopus: 1Viability of 3t3-L1 Preadipocytes Is Modulated by the Applied Frequency but Not the Exposure Duration of Low Intensity Vibratory Stimulation(World Scientific Publishing, 2022) Baskan, Öznur; Özçivici, EnginMechanical forces are the integral determinants in cell and tissue homeostasis and regeneration, and they can affect numerous biological process from proliferation to fate determination. Mechanical forces that possess low magnitude and high frequency characteristics are also known as low intensity vibrations (LIVs). These signals were studied widely on many cell types for regenerative purposes, however most of these studies select components of LIV signals (e.g., magnitude, frequency, duration, etc.) arbitrarily. Here, we addressed the effect of LIV applied frequency, LIV daily exposure time and fate induction on the viability of preadipocyte 3T3-L1 cells. For this, we performed a frequency sweep that was ranging from 30Hz to 120Hz with 15Hz increments applied for 5, 10 or 20min during quiescent growth or adipogenesis for up to 10 days. Results suggest that the applied frequency and fate induction was an important determinant of cell viability while daily exposure time had no effect. These findings contribute to the effort of optimizing a relevant mechanical stimulus that can inhibit adipogenesis.Article Citation - WoS: 22Citation - Scopus: 22Simultaneous Validation of Wearable Motion Capture System for Lower Body Applications: Over Single Plane Range of Motion (rom) and Gait Activities(Walter de Gruyter GmbH, 2022) Mihçin, ŞenayExtracting data from {Zhu, 2019 #5} daily life activities is important in biomechanical applications to define exact boundary conditions for the intended use-based applications. Although optoelectronic camera-marker based systems are used as gold standard tools for medical applications, due to line-of-sight problem, there is a need for wearable, affordable motion capture (MOCAP) systems. We investigate the potential use of a wearable inertial measurement unit (IMU) based-wearable MOCAP system for biomechanical applications. The in vitro proof of concept is provided for the full lower body consisting of hip, knee, and ankle joints via controlled single-plane anatomical range of motion (ROM) simulations using an electrical motor, while collecting data simultaneously via opto-electronic markers and IMU sensors. On 15 healthy volunteers the flexion-extension, abduction-Adduction, internal-external rotation (ROM) values of hip and, the flexion-extension ROM values of the knee and ankle joints are calculated for both systems. The Bland-Altman graphs showed promising agreement both for in vitro and in vivo experiments. The maximum Root Mean Square Errors (RMSE) between the systems in vitro was 3.4° for hip and 5.9° for knee flexion motion in vivo, respectively. The gait data of the volunteers were assessed between the heel strike and toe off events to investigate the limits of agreement, calculating the population averages and standard deviation for both systems over the gait cycle. The maximum difference was for the ankle joint <6°. The results show that proposed system could be an option as an affordable-democratic solution.