WoS İndeksli Yayınlar Koleksiyonu / WoS Indexed Publications Collection
Permanent URI for this collectionhttps://hdl.handle.net/11147/7150
Browse
159 results
Search Results
Now showing 1 - 10 of 159
Article Citation - WoS: 9Citation - Scopus: 8Chlorinated Phosphorene for Energy Application(Elsevier, 2024) Hassani, Nasim; Yağmurcukardeş, Mehmet; Peeters, Francois M.; Neek-Amal, MehdiThe influence of decoration with impurities and the composition dependent band gap in 2D materials has been the subject of debate for a long time. Here, by using Density Functional Theory (DFT) calculations, we systematically disclose physical properties of chlorinated phosphorene having the stoichiometry of PmCln. By analyzing the adsorption energy, charge density, migration energy barrier, structural, vibrational, and electronic properties of chlorinated phosphorene, we found that (I) the Cl-P bonds are strong with binding energy Eb =-1.61 eV, decreases with increasing n. (II) Cl atoms on phosphorene have anionic feature, (III) the migration path of Cl on phosphorene is anisotropic with an energy barrier of 0.38 eV, (IV) the phonon band dispersion reveal that chlorinated phosphorenes are stable when r <= 0.25 where r = m/n, (V) chlorinated phosphorenes is found to be a photonic crystal in the frequency range of 280 cm-1 to 325 cm-1, (VI) electronic band structure of chlorinated phosphorenes exhibits quasi-flat bands emerging around the Fermi level with widths in the range of 22 meV to 580 meV, and (VII) Cl adsorption causes a semiconducting to metallic/semi-metallic transition which makes it suitable for application as an electroactive material. To elucidate this application, we investigated the change in binding energy (Eb), specific capacity, and open-circuit voltage as a function of the density of adsorbed Cl. The theoretical storage capacity of the chlorinated phosphorene is found to be 168.19 mA h g-1with a large average voltage (similar to 2.08 V) which is ideal number as a cathode in chloride-ion batteries.Article Anisotropic Tunability of Vibrational Modes in Black Phosphorus Under Uniaxial Compressive/Tensile Strain(Wiley, 2023) Li, Hao; Kutlu, Tayfun; Carrascoso, Felix; Şahin, Hasan; Munuera, Carmen; Castellanos Gomez, AndresStrain engineering is a powerful strategy for tuning the optical, electrical, vibrational properties of 2D nanomaterials. In this work, a four-point bending apparatus is constructed to apply both compressive and tensile strain on 2D anisotropic black phosphorus flake. Further polarized Raman spectroscopy is used to study the vibrational modes of black phosphorus flakes under uniaxial strain applied along various crystalline orientations. Here, a strong anisotropic blue/redshift of A1g, B2g, and A2g modes is found under compressive/tensile strain, respectively. Interestingly, mode A1g exhibits the maximum/minimum shift while mode B2g and mode A2g present the minimum/maximum shift when the strain is applied along armchair/zigzag direction. Density functional theory calculations are carried out to investigate the anisotropic strain response mechanism, finding that the strain-induced regulation of the PP bond angle, bond length, and especially interlayer interaction has a giant influence on the Raman shift. A four-point bending apparatus is constructed to study the effect of uniaxial strain on the vibrational property of anisotropic black phosphorus. Particularly, strong anisotropy on the Raman blueshift/redshift rate upon compressive/tensile strain can be observed, which results from the strain-induced regulation of the bond angle, bond length, and interlayer interactions according to density functional theory calculation analysis.imageArticle Citation - WoS: 5Citation - Scopus: 5Differences and Similarities in Biophysical and Biological Characteristics Between U87 Mg Glioblastoma and Astrocyte Cells(Springer, 2023) Özdil, Berrin; Çalık Kocatürk, Duygu; Altunayar Ünsalan, Çisem; Açıkgöz, Eda; Oltulu, Fatih; Görgülü, Volkan; Uysal, Ayşegül; Öktem, Gülperi; Ünsalan, Ozan; Güler, Günnur; Aktuğ, HüseyinCurrent cancer studies focus on molecular-targeting diagnostics and interactions with surroundings; however, there are still gaps in characterization based on topological differences and elemental composition. Glioblastoma (GBM cells; GBMCs) is an astrocytic aggressive brain tumor. At the molecular level, GBMCs and astrocytes may differ, and cell elemental/topological analysis is critical for identifying potential new cancer targets. Here, we used U87 MG cells for GBMCS. U87 MG cell lines, which are frequently used in glioblastoma research, are an important tool for studying the various features and underlying mechanisms of this aggressive brain tumor. For the first time, atomic force microscopy (AFM), scanning electron microscopy (SEM) accompanied by energy-dispersive X-ray spectroscopy (EDS), and X-ray photoelectron spectroscopy (XPS) are used to report the topology and chemistry of cancer (U87 MG) and healthy (SVG p12) cells. In addition, F-actin staining and cytoskeleton-based gene expression analyses were performed. The degree of gene expression for genes related to the cytoskeleton was similar; however, the intensity of F-actin, anisotropy values, and invasion-related genes were different. Morphologically, GBMCs were longer and narrower while astrocytes were shorter and more disseminated based on AFM. Furthermore, the roughness values of these cells differed slightly between the two call types. In contrast to the rougher astrocyte surfaces in the lamellipodial area, SEM-EDS analysis showed that elongated GBMCs displayed filopodial protrusions. Our investigation provides considerable further insight into rapid cancer cell characterization in terms of a combinatorial spectroscopic and microscopic approach.Article Citation - WoS: 1Citation - Scopus: 1Hdac9/P300 Immunoexpression and Migration Analysis for Malignant Melanoma Stem Cell(Elsevier, 2023) Özdil, Berrin; Asker Abdikan, Cemile Sinem; Özdemir, Merve; Erişik, Derya; Yesin, Taha Kadir; Avcı, Çığır Biray; Kurkutçu, Yeşim; Güler, Günnur; Aktuğ, HüseyinMelanoma is an aggressive tumor with a poor prognosis that worsens in the metastatic phase. Distruptions of epigenetic mechanisms is known to effect cancer stem cells (CSCs) activity. Malignant melanoma (MM) progression may be promoted by changes in the genetic structure of CSC. Thus, treatments that target epigenetic modifications could be a promising weapon, especially in melanoma. Here, we compared p300, HDAC9, and Factin proteins in melanoma CSCs (CD133+), non-CSCs (CD133-) and CHL-1 cell line, as well as cell migration and division rates. At 4 and 6 h, P300 protein levels in CHL-1 and CD133 + were remarkably similar, and the CD133- showed increases in expression levels as the incubation period lengthened. HDAC9 protein intensity decreased in CHL-1, increased in the CD133-, and remained relatively unchanged in the CD133+ as the incubation period lengthened. The mean value of F-actin expression level increased in all cell group with time, when the highest increase observed in CHL-1. In conclusion, our studies contribute to the management of metastatic diseases in the future and offer new insight into the molecular basis of the initiation and progression of MM.Article A Metric for Gravitational Collapse Around a Schwarzschild Black Hole(World Scientific Publishing, 2023) Erdem, Recai; Demirkaya, Betül; Gültekin, KemalWe consider the problem of gravitational collapse of a fluid under the effect of a small Schwarzschild black hole (e.g. a primordial one). We assume the fluid initially may be approximated by a uniform homogeneous dust. Starting from this configuration we obtain a class of metrics under some physically justified assumptions. We find that the metric we obtain includes the dust collapse as a subcase. After discussing some basic properties of the solution, we discuss the case of dust collapse in more detail. We find that the radial and tangential pressures outside the horizon may take positive or negative values depending on the values of the parameters.Article Citation - WoS: 3Citation - Scopus: 3Stable Single Layer Structures of Aluminum Oxide: Vibrational and Electronic Characterization of Magnetic Phases(Elsevier, 2022) Özyurt, A. Kutay; Molavali, Deniz; Şahin, HasanThe structural, magnetic, vibrational and electronic properties of single layer aluminum oxide (AlO2) are investigated by performing state-of-the-art first-principles calculations. Total energy optimization and phonon calculations reveal that aluminum oxide forms a distorted octahedral structure (1T′-AlO2) in its single layer limit. It is also shown that surfaces of 1T′-AlO2 display magnetic behavior originating from the O atoms. While the ferromagnetic (FM) state is the most favorable magnetic order for 1T′-AlO2, transformation to a dynamically stable antiferromagnetic (AFM) state upon a slight distortion in the crystal structure is also possible. It is also shown that Raman activities (350–400 cm−1) obtained from the vibrational spectrum can be utilized to distinguish the possible magnetic phases of the crystal structure. Electronically, both FM and the AFM phases are semiconductors with an indirect band gap and they can form a type-III vdW heterojunction with graphene-like ultra-thin materials. Moreover, it is predicted that presence of oxygen defects that inevitably occur during synthesis and production do not alter the magnetic state, even at high vacancy density. Apparently, ultra-thin 1T′-AlO2 with its stable crystal structure, semiconducting nature and robust magnetic state is a quite promising material for nanoscale device applications.Article Citation - WoS: 4Citation - Scopus: 4Development of Single-Use Thin Film Electrodes Based on Zn2sno4 on In2o3:sno2 Substrates With Their Biosensing Applications(Elsevier, 2022) Yurttaş, Betül; Maral, Meltem; Erdem, Arzu; Özyüzer, LütfiDopamine (DA) has a significant impact on the emergence and treatment of certain diseases (e.g., Alzheimer's and Parkinson's diseases). Therefore, monitoring of DA is important, and using biosensors is a favorable option instead of time-consuming and expensive conventional methods. In biosensor manufacturing, thin films have become a rapidly emerging field. In this study, a non-enzymatic electrochemical biosensor based on thin film electrodes is developed for monitoring DA levels. The thin film electrodes (ZTO/ITO) are developed by deposition of Zn2SnO4 (ZTO) on In2O3:SnO2 (ITO) substrates by magnetron sputtering. 3-aminopropyltriethoxysilane (APTES) is used to modify the surface of these electrodes. Physical, optical, and structural properties of the electrodes are determined by applying surface profilometry, UV–VIS–NIR spectrophotometry, X-ray diffraction (XRD), and scanning electron microscopy (SEM) measurements. According to these measurements, it has been observed that the ZTO/ITO combination has a higher optical transmission value than the bare ITO, depending on the deposition time and the oxygen concentration used during ZTO deposition. In addition, the ITO thin film has a crystalline structure, while the ZTO thin film has an amorphous structure and both thin films have a good surface morphology. As electrochemical analysis, cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and differential pulse voltammetry (DPV) measurements are performed. As a result of CV and EIS measurements, a remarkable change (63.54%) was observed after applying APTES modification onto the surface of ZTO/ITO electrode, and the ones obtained by DPV showed successful detection of DA by APTES modified ZTO/ITO. In addition, the experiments in the presence of interferences such as ascorbic acid (AA), uric acid (UA), bovine serum albumin (BSA), and fish sperm double-stranded DNA (fsDNA) show that the electrodes can be successfully applied for voltammetric determination of DA. The detection limit of DA was estimated to be 0.013 µM in the range of DA between 0.1 and 1 µM, and sensitivity was calculated and found to be 11.057 μA μg−1 mL cm−2, which means ZTO/ITO electrodes have a good sensitivity.Article Citation - WoS: 11Citation - Scopus: 10Intercalation Leads To Inverse Layer Dependence of Friction on Chemically Doped Mos2(IOP Publishing, 2023) Açıkgöz, Oğulcan; Guerrero, Enrique; Yanılmaz, Alper; Dağdeviren, Ömür E.; Çelebi, Cem; Strubbe, David A.; Baykara, Mehmet Z.We present results of atomic-force-microscopy-based friction measurements on Re-doped molybdenum disulfide (MoS2). In stark contrast to the widespread observation of decreasing friction with increasing number of layers on two-dimensional (2D) materials, friction on Re-doped MoS2 exhibits an anomalous, i.e. inverse, dependence on the number of layers. Raman spectroscopy measurements combined with ab initio calculations reveal signatures of Re intercalation. Calculations suggest an increase in out-of-plane stiffness that inversely correlates with the number of layers as the physical mechanism behind this remarkable observation, revealing a distinctive regime of puckering for 2D materials.Article Citation - WoS: 4Citation - Scopus: 4Indirect Exchange Interaction in Two-Dimensional Materials With Quartic Dispersion(American Physical Society, 2022) Canbolat, Ahmet Utku; Sevinçli, Haldun; Çakır, ÖzgürWe investigate the indirect magnetic exchange interaction between two magnetic moments in a two-dimensional semiconductor with quartic dispersion, featuring a singularity at the band edge. We obtain the Green's functions analytically to calculate the magnetic exchange interaction at zero temperature. We show that the singularity in the density of states (DOS) for quartic dispersion gives rise to an enhancement in the amplitude of the Ruderman-Kittel-Kasuya-Yosida (RKKY) interaction as the Fermi energy is swept toward the band edge. Furthermore, a region of finite exchange interaction arises, with a range increasing as the Fermi energy approaches the band edge. The results lay the possibility of an electrical/chemical control over the exchange interactions.Correction Correction To: “curved Space and Particle Physics Effects on the Formation of Bose–einstein Condensation Around a Reissner–nordstrøm Black Hole”(Springer, 2022) Erdem, Recai; Demirkaya, Betül; Gültekin, KemalAfter this correction Fig. 1 in [1] is replaced by Fig. 1 above which is essentially the same as the one in [1]. Figure 2 in [1] now becomes irrelevant. Figure 3 in [1] is replaced by Fig. 2 above which is essentially the same as the one in [1].