Chemical Engineering / Kimya Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/14
Browse
19 results
Search Results
Article Citation - WoS: 11Citation - Scopus: 12Treatment of Sugar Industry Wastewater by Using Subcritical Water as a Reaction Media(Wiley, 2023) Orak, Ceren; Öcal, Bulutcem; Yüksel, AslıThe sugar industry is one of the most wastewater-producing industries and it contains high content of organic and inorganic substances. Treating and reusing wastewater has significant importance because sugar industry needs to use a high volume of water. In this study, sugar industry wastewater was treated under subcritical conditions and the impacts of reaction temperature and duration over TOC removal percentage were investigated. Additionally, the impact of NaOH concentration over TOC removal percentage was examined. The highest TOC removal was obtained almost 95 % in the presence of 0.1 M of NaOH at 240 degrees C for 90 min of reaction duration. Treatment of sugar industry wastewater by subcritical water oxidation followed the second-order reaction kinetic model and the activation energy was found as 11.41 kJ/mol. Furthermore, the intermediate products were identified via GC-MS.Article Citation - WoS: 10Citation - Scopus: 12Novel Hybrid Adsorption-Electrodialysis (aded) System for Removal of Boron From Geothermal Brine(American Chemical Society, 2022) Altınbaş, Bekir Fırat; Orak, Ceren; Ökten, Hatice Eser; Yüksel, AslıA novel hybrid adsorption-electrodialysis (AdED) system to remove environmentally harmful boron from geothermal brine was designed and effective operating parameters such as pH, voltage, and flow rate were studied. A cellulose-based adsorbent was synthesized from glycidyl methacrylate (GMA) grafted cellulose and modified with a boron selective n-methyl-d-glucamine (NMDG) group and characterized with SEM-EDX, FT-IR, and TGA analyses. Batch adsorption studies revealed that cellulose-based adsorbent showed a remarkable boron removal capacity (19.29 mg/g), a wide stable operating pH range (2-10), and an adsorption process that followed the Freundlich isotherm (R2= 0.95) and pseudo-second-order kinetics (R2= 0.99). In the hybrid AdED system, the optimum operating parameters for boron removal were found to be a pH of 10, a voltage of 10 V, a flow rate of 100 mL/min, and an adsorbent dosage of 4 g/L. The presence of the adsorbent in the hybrid system increased boron removal from real geothermal brine (containing 199 ppm boron) from 7.2% to 73.3%. The results indicate that the designed AdED system performs better than bare electrodialysis for boron removal from ion-rich real geothermal brine while utilizing environmentally friendly cellulose-based adsorbent.Article Citation - WoS: 11Citation - Scopus: 12Box-Behnken Design for Hydrogen Evolution From Sugar Industry Wastewater Using Solar-Driven Hybrid Catalysts(American Chemical Society, 2022) Orak, Ceren; Yüksel, AslıHydrogen is a clean and green fuel and can be produced from renewable sources via photocatalysis. Solar-driven hybrid catalysts were synthesized and characterized (scanning electron microscopy (SEM), transmission electron microscopy (TEM), Brunauer-Emmett-Teller (BET), X-ray diffraction (XRD), photoluminescence (PL) spectroscopy, and UV-vis diffuse reflectance spectroscopy (DSR)), and the results implied that graphene-supported LaRuO3is a more promising photocatalyst to produce hydrogen and was used to produce hydrogen from sugar industry wastewater. To investigate the main and interaction effects of reaction parameters (pH, catalyst amount, and [H2O2]0) on the evolved hydrogen amount, the Box-Behnken experimental design model was used. The highest hydrogen evolution obtained was 6773 μmol/gcatfrom sugar industry wastewater at pH 3, 0.15 g/L GLRO, and 15 mM H2O2. Based on the Pareto chart for the evolved hydrogen amount using GLRO, among the main effects, the only effective parameter was the catalyst amount for the photocatalytic hydrogen evolution from sugar industry wastewater. In addition, the squares of pH and two-way interaction of pH and [H2O2]0were also statistically efficient over the evolved hydrogen amount.Article Citation - WoS: 7Citation - Scopus: 7Cross-Linked Phosphorylated Cellulose as a Potential Sorbent for Lithium Extraction From Water: Dynamic Column Studies and Modeling(American Chemical Society, 2022) Recepoğlu, Yaşar Kemal; Yüksel, AslıPhosphorylated functional cellulose was cross-linked with epichlorohydrin at different ratios because it is a very hydrophilic substance that instantly swells to form a hydrogel when it comes into contact with water. It was aimed to utilize a continuously packed bed column to recover lithium from water under varying operating conditions such as flow rate and bed height. The characterization results confirmed cross-linking based on morphology, structure, surface area, and thermal stability differences. Lithium recovery was more efficient with a low flow rate, but the dynamic sorption process was independent of bed height. The total capacities at the three flow rates with 1.5 cm bed height were 33.56, 30.15, and 25.54 mg g-1, and the total saturation times at the three different bed heights with 0.5 mL min-1 flow rate were 659, 1001, and 1007 min, respectively. Only 15.75 mL of 5% H2SO4 solution was required to desorb approximately 100% of Li from the saturated sorbent.Article Citation - WoS: 13Citation - Scopus: 11Valorization of Olive Tree Pruning Waste for Potential Utilization in Lithium Recovery From Aqueous Solutions(Springer, 2022) Nampeera, Jackline; Recepoğlu, Yaşar Kemal; Yüksel, AslıOlive tree pruning waste, mainly composed of olive branches, was converted into a value-added and sustainable product capable of lithium as a biosorbent through alkali treatment and phosphorylation reaction. Characterization studies were performed by SEM–EDX, XPS, FTIR, and TGA. Factors affecting biosorption mechanism, i.e., sorbent dosage, pH, initial Li+ concentration and temperature, and competitive ions’ presence, were investigated the synthesized functionalized olive branches (FOB). A commercial lithium selective resin, Lewatit TP 260, was also compared with FOB in batch and column studies. The Freundlich model fits adsorption isotherms better than the Langmuir model, with a maximum adsorption capacity of 6.7 mg/g at 30 °C and pH 7–8. Kinetic studies proved fast kinetics and equilibrium were attained in 6 min, while thermodynamic studies showed an exothermic (Δ Ho= - 17.52 kJ/ mol) , spontaneous reaction Δ Go< 0 at all temperatures), and increased randomness Δ So= + 24.27 J/ mol. K) at the interaction interface. Column studies revealed that although Lewatit TP 260 resin showed higher sorption capacity, its desorption efficiency (50.42%) was lower than that of FOB (99.9%), and the degree of column utilization of FOB (56.81%) was better than Lewatit TP 260 resin’s (16.0%). The findings were encouraging in the successful synthesis of a promising biosorbent from an abundant waste in Turkey for use in sustainable lithium recovery from aqueous sources. Graphical abstract: [Figure not available: see fulltext.]Article Citation - WoS: 1Citation - Scopus: 1Selective Catalytic Hydrogenation of Cellulose Into Sorbitol With Ru-Based Catalysts(TÜBİTAK, 2022) Orak, Ceren; Sapmaz, Aycan; Yüksel, AslıSorbitol is one of the platform chemicals and can be produced from various renewable and sustainable sources via different processes. Hydrothermal liquefaction is an effective and promising approach to produce sorbitol, since the subcritical reaction media and appropriate catalysts provide a selective production of platform chemicals. In this study, sorbitol was produced from different renewable sources (cellulose and glucose) in the presence of Ru-based catalysts (Ru/SiO2, Ru/AC, Ru/SBA-15, and Ru/SBA-15-SO3) under subcritical conditions. The highest cellulose conversion was achieved as 90% in the presence of Ru/SBA-15-SO3 for 1 h of reaction duration. The highest sorbitol yield (%) by hydrothermal liquefaction of cellulose was obtained as 6.2% by using Ru/AC for 1 h of reaction duration. A total of 99.9% of glucose conversion was achieved in the presence of all catalysts. The highest sorbitol yield (%) by hydrothermal liquefaction of glucose was found as 3.8% for 1 h of reaction duration. Owing to the results of GC-MS analysis, the intermediate products were identified, and, thus, a reaction pathway was proposed.Article Citation - WoS: 13Citation - Scopus: 12Comparison of Photocatalytic Performances of Solar-Driven Hybrid Catalysts for Hydrogen Energy Evolution From 1,8–diazabicyclo[5.4.0]undec-7 (dbu) Solution(Elsevier, 2022) Orak, Ceren; Yüksel, AslıHydrogen is evolved from 1,8–Diazabicyclo [5.4.0]undec-7-ene (DBU) model solution which is a nitrogen-containing heterocyclic organic compound using different solar-driven hybrid photocatalysts. A characterization study is performed and the results of PL analysis show that the most promising solar-driven hybrid catalyst is graphene supported LaFeO3. Then, an experimental design matrix is built using the Box Behnken model to main and interaction effects of reaction parameters (pH, catalyst loading, and [H2O2]0). Based on the experimental results relatively higher hydrogen amounts are achieved using GLFO and this finding is supported by PL analysis. The highest hydrogen amount and DBU removal are determined as 3058.31 μmol/gcat and 90.3%, respectively. Statistical analysis shows that the square of catalyst loading is the only effective parameter over the produced hydrogen amount from the DBU model solution using GLFO and the R2 of model is 92.47%. Thus, hydrogen production and wastewater treatment could be achieved via photocatalytic oxidation as concomitant.Article Citation - WoS: 14Citation - Scopus: 12Photocatalytic Hydrogen Energy Evolution From Sugar Beet Wastewater(Wiley-VCH Verlag, 2021) Orak, Ceren; Yüksel, AslıHydrogen is a clean, environmentally friendly, storable, and sustainable green energy source as well as a potential fuel. It could be produced from various biomass, wastewater, or other sources by different processes. In this study, hydrogen was evolved from sucrose model solution and real sugar beet wastewater by photocatalytic oxidation using a perovskite catalyst under solar light irradiation. In this context, firstly, the graphene supported LaFeO3 (GLFO) was synthesized and then, a characterization study shows that GLFO is successfully synthesized. To optimize the reaction parameters (pH, catalyst loading, and initial hydrogen peroxide concentration), an experimental matrix was created using the Box Behnken model. Whereas the highest hydrogen evolution from sucrose model solution was observed as 3520 μmol/gcat, the highest hydrogen evolution from sugar beet wastewater was obtained as 7035 μmol/gcat. The highest TOC removal (99.73 %) from sugar beet wastewater was also achieved at the same reaction conditions.Article Citation - WoS: 17Citation - Scopus: 16Synthesis, Characterization and Adsorption Studies of Phosphorylated Cellulose for the Recovery of Lithium From Aqueous Solutions(Editura Acad Romane, 2021) Recepoğlu, Yaşar Kemal; Yüksel, AslıIn this study, pristine cellulose was functionalized by the phosphorylation reaction to make it suitable for lithium separation. After characterization studies of the synthesized adsorbent with SEM, EDX, FTIR, TGA and XPS, the effects of various parameters on the lithium uptake capacity of the adsorbent were examined. The analysis of equilibrium data by several adsorption models showed that maximum adsorption capacity of the adsorbent was found to be 9.60 mg/g at 25 degrees C by the Langmuir model. As initial concentration and contact time increased, adsorption capacity also increased, however, mild temperature (25-35 degrees C) and pH (5-6) were better for the adsorption of lithium. 80% of lithium adsorption within three minutes proved the fast kinetic nature of the adsorbent. A 99.5% desorption efficiency of lithium was achieved with 0.5 M H2SO4, among HCl and NaCl with different molarities. Phosphorylated cellulose was shown to be a favorable adsorbent for the recovery of lithium from aqueous solutions.Article Citation - WoS: 21Citation - Scopus: 21Graphene-Supported Lafeo3 for Photocatalytic Hydrogen Energy Production(Wiley, 2021) Orak, Ceren; Yüksel, AslıHydrogen is a green, environmentally benign and sustainable energy source with no harmful combustion products to fulfil the increasing energy demand. Photocatalytic oxidation has various advantageous to produce hydrogen from different sources such as wastewater, alcohol solutions using different types of catalysts. Sucrose solution was chosen as a model solution to evolve hydrogen using LFO and GLFO catalysts under solar light irradiation, and graphene was used as a catalyst support to enhance the amount of produced hydrogen amount. A characterization study, which consists of SEM-EDX, BET, XRD, PL, TEM, XPS and FT-IR analyses, was carried out. A full factorial design was created via Minitab 18 to analyse the factors affecting the produced hydrogen amount, which are pH, catalyst loading, H2O2 concentration and graphene content statistically. Based on the results, graphene content is an important parameter and pH and H2O2 concentration have a synergetic effect over hydrogen production. Additionally, the effects of calcination temperature, pH, H2O2 concentration and catalyst loading over produced gases were investigated. The best promising result was obtained as 3388 mu mol/g(cat) at the following reaction conditions: 7.5 of pH, 0.1 g L-1 catalyst loading (GLFO, which is calcined at 700 degrees C) and using 15 mM H2O2 under solar light irradiation. Novelty Statement Hydrogen is produced from sucrose solution with low cost process requiring no special equipment, high pressure or temperature. First study that uses perovskite catalysts for the production of hydrogen from sucrose solution by photo-Fenton like oxidation GLFO is a promising photocatalyst for H-2 production by solar-Fenton like oxidation with the highest H-2 evaluation at 3388.34 mu mol/g(cat).