Chemical Engineering / Kimya Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/14
Browse
17 results
Search Results
Conference Object Citation - WoS: 24Effect of pH and Hydration on the Normal and Lateral Interaction Forces Between Alumina Surfaces(2006) Polat, Mehmet; Sato, Kimiyasu; Nagaoka, Takaaki; Watari, KojiNormal and lateral interaction forces between alumina surfaces were measured using Atomic Force Microscopy-Colloid Probe Method at different pH. The normal force curves exhibit a well-defined repulsive barrier and an attractive minimum at acidic pH and the DLVO theory shows excellent agreement with the data. The normal forces are always repulsive at basic pH and the theory fails to represent the measurements. Lateral forces are almost an order of magnitude smaller in the basic solutions. These differences, which have important implications in the study of stability and rheology, are attributed to the hydration of the alumina surface at basic pH. © 2013 Elsevier B.V., All rights reserved.Article Citation - WoS: 273Citation - Scopus: 327Transesterification of Nannochloropsis Oculata Microalga's Lipid To Biodiesel on Al2o3 Supported Cao and Mgo Catalysts(Elsevier Ltd., 2009) Umdu, Emin Selahattin; Tuncer, Mert; Şeker, ErolIn this study, we present the activities of Al2O3 supported CaO and MgO catalysts in the transesterification of lipid of yellow green microalgae, Nannochloropsis oculata, as a function of methanol amount and the CaO and MgO loadings at 50 °C. We found that pure CaO and MgO were not active and CaO/Al2O3 catalyst among all the mixed oxide catalysts showed the highest activity. Not only the basic site density but also the basic strength is important to achieve the high biodiesel yield. Biodiesel yield over 80 wt.% CaO/Al2O3 catalyst increased to 97.5% from 23% when methanol/lipid molar ratio was 30.Article Citation - WoS: 16Citation - Scopus: 21Ph- and Electro-Responsive Characteristics of Silk Fibroin-Hyaluronic Acid Polyelectrolyte Complex Membranes(Elsevier Ltd., 2009) Malay, Özge; Batıgün, Ayşegül; Bayraktar, OğuzpH-responsiveness of recently developed silk fibroin (SF) and hyaluronic acid (HA) polyelectrolyte complex (PEC) membranes and their potential use in electro-responsive drug release systems were investigated. PEC membranes were prepared within a narrow pH window (3.0-3.5) for a SF-HA weight ratio of 20 and they were characterized by Atomic Force Microscopy in addition to characterization studies previously reported by our group. Swelling kinetics of the membranes was studied for a pH window of 2.5-7.4 and cyclic swelling test was performed to determine the pH-responsiveness of the membranes. It was shown that membranes swelled more in alkaline conditions and responded to variations in pH of the medium. Electric-stimuli assisted drug permeation and release studies were performed with a custom-made diffusion cell under both passive condition and electric field applied in pulsatile fashion. The instantaneous flux raised as the current was applied and then declined when the current application was terminated, and this process was repeated on subsequent applications. SF-HA complex membranes were found promising for the electric-stimuli-sensitive release of a high molecular weight and charged model drug for a membrane-permeation controlled formulation.Article Citation - WoS: 262Citation - Scopus: 286Dye Adsorption Behavior of Luffa Cylindrica Fibers(Elsevier Ltd., 2008) Demir, Hasan; Top, Ayben; Balköse, Devrim; Ülkü, SemraUsing natural Luffa cylindrica fibers as adsorbent removal of methylene blue dye from aqueous solutions at different temperatures and dye concentrations was investigated in this study. Thermodynamics and kinetics of adsorption were also investigated. The adsorption isotherms could be well defined with Langmuir model instead of Freundlich model. The thermodynamic parameters of methylene blue (MB) adsorption indicated that the adsorption is exothermic and spontaneous. The average MB adsorption capacity was found out as 49 mg/g and average BET surface area of fibers was calculated as 123 m2/g.Article Citation - WoS: 8Citation - Scopus: 8The Effects of Urease Immobilization on the Transport Characteristics and Protein Adsorption Capacity of Cellulose Acetate Based Hemodialysis Membranes(Springer Verlag, 2009) Yaşar Mahlıçlı, Filiz; Alsoy Altınkaya, SacideIn this study, cellulose acetate (CA) based hemodialysis membranes were prepared by a dry phase inversion method and the influences of urease immobilization on the clearing performance and protein adsorption capacity of the membranes were investigated. Permeation experiments have shown that modification of CA membranes with urease immobilization not only enhanced the transport rate of urea but also increased the permeation coefficients of uric acid and creatinine by changing the structure of the membrane. Furthermore, the protein adsorption capacity of the CA membranes decreased. On the other hand, the mechanical strength of the modified CA membrane did not change significantly compared with that of the unmodified one. A mathematical model was derived to determine the rate of mass transfer of urea through modified CA membranes. Model predictions along with the experimental data suggest that urease immobilization can be used as an alternative method in preparing CA based hemodialysis membranes with improved transport characteristics and biocompatibility through reduced protein adsorption capacities.Article Citation - WoS: 14Citation - Scopus: 15Neutralization of an Extremely Acidic Sludge and Stabilization of Heavy Metals in Flyash Aggregates(Elsevier Ltd., 2007) Polat, Mehmet; Güler, Erkan; Lederman, Eli; Cohen, HaimAn extremely acidic, heavy metal-rich sludge (pH = -1.2) was scrubbed with a Class-F fly ash in order to simultaneously neutralize the acidity and stabilize the heavy metals contained in both wastes. This paper outlines the leaching behavior of the aggregate material generated by scrubbing. For proper fly ash/sludge ratios, the fly ash acted as an outstanding neutralizer for the acidic waste. Leaching of heavy metals from the aggregate samples was below the environmental limits within a pH range between 3 and 9. Subsequent washing of the leached aggregate with acidic CALWET solutions did not result in an additional release of heavy metals. It is proposed that coordinative bonding of the metal cations onto neutral surface sites and electrostatic adsorption led to stabilization of the heavy metals within the aggregate structure below hydrolysis pHs.Article Citation - WoS: 72Citation - Scopus: 87Adsorption of Olive Leaf (olea Europaea L.) Antioxidants on Silk Fibroin(American Chemical Society, 2007) Bayçın, Deniz; Altıok, Evren; Ülkü, Semra; Bayraktar, OğuzThe adsorption isotherms of oleuropein and rutin were evaluated at different temperatures, pH values, and solid/liquid ratios. The experimental data of adsorption isotherms were well fitted to a Langmuir model. The maximum adsorption capacities were determined as 108 mg of oleuropein/g of silk fibroin and 21 mg of rutin/g of silk fibroin. After adsorption of oleuropein and rutin, the antioxidant capacity of silk fibroin increased from 1.93 to 3.61 mmol of TEAC/g. Silk fibroin also gained antimicrobial activity against Staphylococcus aureus and Klebsiella pneumoniae after adsorption of olive leaf antioxidants. In a desorption process, 81% of rutin and 85% of oleuropein were removed from the adsorbent surface in 70% aqueous ethanol solution. Consequently, silk fibroin was found to be a promising biomaterial for the production of functional food or dietary supplements and for the purification of oleuropein and rutin from olive leaf extracts.Article Citation - WoS: 68Citation - Scopus: 70Complex Coacervation of Silk Fibroin and Hyaluronic Acid(Elsevier Ltd., 2007) Malay, Özge; Bayraktar, Oğuz; Batıgün, AyşegülThis study aimed to investigate the pH-induced complexation of silk fibroin (SF) and hyaluronic acid (HA). SF-HA complex coacervation was investigated by monitoring turbidity of the SF-HA system under slow acidification. Gravimetric analysis was performed to determine the yield of complex coacervation and viscosity of the system was measured to study the formation of the complexes at different pH values. The influences of total biopolymer concentration and biopolymer weight ratio on complex coacervation were examined during the analyses. Formation of the complexes was evidenced by the minimum viscosity and the maximum turbidity observed in the system. SF-HA complexes were formed within the pH-window of 2.5-3.5 regardless of the total biopolymer concentration or biopolymer ratio. Complex coacervation of SF-HA showed a reversible behavior and coacervation could be handled even in excess amounts of the biopolymers, which pointed out a non-stoichiometric complexation.Article Citation - WoS: 33Citation - Scopus: 35Henry's Law Constant, Octanol-Air Partition Coefficient and Supercooled Liquid Vapor Pressure of Carbazole as a Function of Temperature: Application To Gas/Particle Partitioning in the Atmosphere(Elsevier Ltd., 2006) Odabaşı, Mustafa; Çetin, Banu; Sofuoğlu, AysunThe Henry's law constant for carbazole was experimentally determined between 5 and 35°C using a gas-stripping technique. The following equation was obtained for dimensionless Henry's law constant (H′) versus temperature (T, K):lnH′=-3982(T,K)-1+1.01 Temperature-dependent octanol-air partition coefficients (KOA) and supercooled liquid vapor pressures (PL, Pa) of carbazole were also determined using the GC retention time method. The temperature dependence of KOA and PL were explained by the following:logKOA=4076/(T,K)-5. 65logPL(Pa)=-3948(T,K)-1+11.84 The gas and particle-phase carbazole concentrations measured previously in Chicago, IL in 1995 was used for gas/particle partitioning modeling. Octanol based absorptive partitioning model consistently underpredicted the gas/particle partition coefficients (K p) for all sampling periods. However, overall there was a good agreement between the measured Kp and soot-based model predictions.Article Citation - WoS: 1Citation - Scopus: 2Kinetic Estimation of the Adsorbate Distribution on the Surface From Adsorbed Amounts(Elsevier Ltd., 2006) Polat, MehmetA phenomenological multilayer adsorption model for a well-dispersed, homogeneous, nonporous adsorbent and a molecular adsorbate is presented. The model provides explicit kinetic expressions associating the adsorbed amounts to the fraction of the surface occupied and reduces to the first- and second-order adsorption models for special cases. Parameters of the model are a pair of true rate constants related to the adsorbate-adsorbent and adsorbate-surface adsorbate affinities. A general graphical procedure and analytical equations for special cases are provided to estimate the rate constants from kinetic adsorption data. Data from the adsorption of sodium stearate onto α-alumina from water were used to test the model. The predicted values of the rate constants suggested that the stearate was distributed homogeneously on the alumina surface and essentially adsorbed as a monolayer before starting to form the second layer.