Chemical Engineering / Kimya Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/14
Browse
3 results
Search Results
Article Citation - WoS: 32Citation - Scopus: 36A Review of Boron Removal From Aqueous Solution Using Carbon-Based Materials: an Assessment of Health Risks(Elsevier, 2022) Gören, Ayşegül Yağmur; Recepoğlu, Yaşar Kemal; Karagündüz, Ahmet; Khataee, Alireza; Yoon, YeojoonCarbon-based compounds have gained attention of researchers for use in boron removal due to their properties, which make them a viable and low cost adsorbent with a high availability, as well as environmental friendliness and high removal efficiency. The removal of boron utilizing carbon-based materials, including activated carbon (AC), graphene oxide (GO), and carbon nanotubes (CNTs), is extensively reviewed in this paper. The effects of the operating conditions, kinetics, isotherm models, and removal methods are also elaborated. The impact of the modification of the lifetime of carbon-based materials has also been explored. Compared to unmodified carbon based materials, modified materials have a significantly higher boron adsorption capability. It has been observed that adding various elements to carbon-based materials improves their surface area, functional groups, and pore volume. Tartaric acid, one of these doped elements, has been employed to successfully improve the boron removal and adsorption capabilities of materials. An assessment of the health risk posed to humans by boron in treated water utilizing carbon-based materials was performed to better understand the performance of materials in real-world applications. Furthermore, the boron removal effectiveness of carbon-based materials was evalu ated, as well as any shortcomings, future perspectives, and gaps in the literature.Article Citation - WoS: 18Citation - Scopus: 17Cnt Incorporated Polyacrilonitrile/Polypyrrole Nanofibers as Keratinocytes Scaffold(Trans Tech Publications, 2019) İnce Yardımcı, Atike; Aypek, Hande; Öztürk, Özgür; Yılmaz, Selahattin; Özçivici, Engin; Meşe, Gülistan; Selamet, YusufPolypyrrole (PPy) is an attractive scaffold material for tissue engineering with its non-toxic and electrically conductive properties. There has not been enough information about PPy usage in skin tissue engineering. The aim of this study is to investigate biocompatibility of polyacrilonitrile (PAN)/PPy nanofibrous scaffold for human keratinocytes. PAN/PPy bicomponent nanofibers were prepared by electrospinning, in various PPy concentrations and with carbon nanotube (CNT) incorporation. The average diameter of electrospun nanofibers decreased with increasing PPy concentration. Further, agglomerated CNTs caused beads and disordered parts on the surface of nanofibers. Biocompatibility of these PAN/PPy and PAN/PPy/CNT scaffolds were analyzed in vitro. Both scaffolds provided adhesion and proliferation of keratinocytes. Nanofiber diameter did not significantly influence the morphology of cells. However, with increasing number of cells, cells stayed among nanofibers and this affected their shape and size. In this study, we demonstrated that PAN/PPy and PAN/PPy/CNT scaffolds enabled the growth of keratinocytes, showing their biocompatibility.Article Citation - WoS: 28Citation - Scopus: 31The Effects of Catalyst Pretreatment, Growth Atmosphere and Temperature on Carbon Nanotube Synthesis Using Co-mo/Mgo Catalyst(Elsevier Ltd., 2015) İnce Yardımcı, Atike; Yılmaz, Selahattin; Selamet, YusufThe growth of high quality and high yield carbon nanotubes (CNTs) by catalytic chemical vapor deposition (CVD) of CH4 over Co-Mo/MgO catalyst was investigated for different growth temperatures and H2 flow rates. It was observed that CNT yield decreased with the H2 flow rate, however, quality increased with increasing H2 flow rate. CNT yield increased for the temperatures 850-950 °C but dropped significantly above 950 °C. In this study, the highest yield of 1526% was obtained at the growth temperature of 950 °C. The optimum H2 flow rate was 200 sccm; this rate gave both high graphitization and high yield of product. Various CNT growth atmospheres including Ar, H2 and the mixture of both gases were also analyzed and it was observed that the highest quality CNTs were obtained for both pretreatment and growth carried out with H2. This gave a high yield of 292%. On the other hand, CNT growth carried out under Ar atmosphere gave higher CNT yield of 368%, however, the CNTs grown with Ar were more defective and had larger diameters. Prime novelty statement We demonstrate a sorbitol added catalysis synthesis method and importance of the ideal growth conditions to improve high quality single walled carbon nanotube yield up to 1500%.