Chemical Engineering / Kimya Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/14
Browse
20 results
Search Results
Book Part Citation - Scopus: 3Tissue Engineering Applications of Marine-Based Materials(Springer, 2022) Polat, Hürriyet; Zeybek, Nuket; Polat, MehmetTissue engineering is a promising approach in replacing or improving tissues lost or has become nonviable due to disease or trauma by the use of scaffold materials by combining engineering and biochemical/physicochemical methods. Its purpose is to create suitable matrices that support cell differentiation and proliferation toward the formation of new and functional tissue. Marine-based natural compounds are potential scaffold feedstock material in tissue engineering owing to their biocompatibility and biodegradability while providing excellent biochemical/physicochemical properties. Numerous application areas and various fabrication routes techniques described in the literature attest to the importance of these materials in tissue regeneration. This review has been carried to merge the information from a large number of studies on the marine-based scaffold materials in tissue engineering into a coherent summary. © The Editor(s) (if applicable) and The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd. 2022.Article Citation - WoS: 16Citation - Scopus: 13Energy storage performance of nitrogen-doped reduced graphene oxide/co-doped polyaniline nanocomposites(Springer, 2022) Altınışık, Hasan; Getiren, Bengü; Çıplak, Zafer; Soysal, Furkan; Yıldız, NurayThe design and exploration of carbon-based electrode materials have become highly significant for developing supercapacitor technology, which has attracted considerable attention in energy storage systems. Here, nitrogen-doped reduced graphene oxide (N-rGO) – Polyaniline (PANI) nanocomposites were synthesized by a facile two-step method in which in situ polymerization of aniline monomer was performed on hydrothermally synthesized N-rGO nanosheets in DBSA and H2SO4 medium for co-doping of PANI chains. The effects of various acid concentrations (DBSA:H2SO4 0.5 − 0.25:1 n/n) and N-rGO:aniline ratios (N-rGO:aniline 1:4–10 m/m) used in the preparation of the electrode material on the capacitive properties were investigated. It is found that the co-doped N-rGO-PANI nanocomposites exhibit a high specific capacitance of 346.3 F g− 1 at 1 A g− 1, remarkable rate capacity (99.9%, 1–10 A g− 1) and excellent cycle stability at 5 A g− 1 (81.3%, 5000 cycles) in a two-electrode system. As a result, constructing co-doped PANI chains and N-doped rGO provided a viable and simple way to improve the capacitive performances of supercapacitors.Article Citation - Scopus: 22Multi‑purpose Reverse Logistics Network Design for Medical Waste Management in a Megacity: Istanbul, Turkey(Springer, 2022) Balcı, Esin; Balcı, Sezin; Sofuoğlu, AysunIn the study, a multi-purpose reverse logistics network has been designed to create effectual management of medical waste (MW) generated in 39 districts of Istanbul, a heavily populated city, during the COVID-19 pandemic as well as that to be generated in the next decade. With the model, the medical waste management system in Istanbul is analyzed during the pandemic and for the next 10 years. The model attempts to integrate economic, environmental, and social objectives within the sustainable development goals. It aims to maximize the number of personnel and government earnings for the estimated MW of a megacity while minimizing the total fixed cost and the cost of carbon emissions and transportation. The results indicated that the existing facilities are sufficient for the treatment and disposal of MW generated even under pandemic conditions. However, the capacity of the sterilization facility could be insufficient to treat the estimated amount of MW in the next decade. Opening a sterilization facility near the sanitary landfill in Komurcuoda with a total management cost of 62,450,332 €/year would be an optimum solution for Istanbul MW. In comparison to the single-purpose model results, the multi-purpose model resulted in approximately 42,000 € more in total cost. Sensitivity analyses show that the amount of MW has the most significant effect on the total cost. This simple model created an effective MW management proposal for Istanbul, which can be a model for megacities.Article Citation - WoS: 4Citation - Scopus: 4Polymer-Bonded Cdte Quantum Dot-Nitroxide Radical Nanoprobes for Fluorescent Sensors(Springer, 2022) Karabıyık, Merve; Ebil, ÖzgençA novel functional polymer-bonded quantum dots (QDs)-nitroxide radical complex was demonstrated. In the first part of the study, the synthesis of polymer thin films via initiated chemical vapor deposition (iCVD), functionalization of polymer thin films with amine functional groups, and attachment of QDs to polymer surface were demonstrated. Fourier transform infrared spectroscopy and energy-dispersive X-ray spectroscopy together with fluorescence spectroscopy studies revealed that aliphatic primary amine (propylamine) was very effective for the functionalization of iCVD deposited poly(glycidyl methacrylate) (pGMA) and its copolymer with diethylaminoethyl methacrylate (p(GMA-co-DEAEMA)) and also QD attachment to functionalized polymer surface. In the second part of the study, the synthesis and attachment of Quantum Dot-4Amino TEMPO (QD-4AT) nanoprobes to functionalized pGMA thin films and feasibility of using them as fluorescent sensor structures were investigated. It was found that high initial 4AT concentration and long (24 h) interaction times are beneficial for nanoprobe synthesis. Electron paramagnetic resonance (EPR) spectroscopy analysis revealed the existence of covalent bond between QD and 4AT when 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide was used during synthesis. EPR analysis together with fluorescence microscopy investigation confirmed the successful attachment of nanoprobes to polymer surface. Time-depended fluorescence quenching analysis revealed that more than 50% reduction in fluorescence intensity within 15 min demonstrating the potential of polymer bonded QD-4AT nanoprobes in various sensor applications.Article Citation - WoS: 10Citation - Scopus: 12Enhanced Model Protein Adsorption of Nanoparticulate Hydroxyapatite Thin Films on Silk Sericin and Fibroin Surfaces(Springer, 2022) Özcan, Selçuk; Çiftçioğlu, MuhsinHydroxyapatite coated metallic implants favorably combine the required biocompatibility with the mechanical properties. As an alternative to the industrial coating method of plasma spraying with inherently potential deleterious effects, sol-gel methods have attracted much attention. In this study, the effects of intermediate silk fibroin and silk sericin layers on the protein adsorption capacity of hydroxyapatite films formed by a particulate sol-gel method were determined experimentally. The preparation of the layered silk protein/hydroxyapatite structures on glass substrates, and the effects of the underlying silk proteins on the topography of the hydroxyapatite coatings were described. The topography of the hydroxyapatite layer fabricated on the silk sericin was such that the hydroxyapatite particles were oriented forming an oriented crystalline surface. The model protein (bovine serum albumin) adsorption increased to 2.62 µg/cm2 on the latter surface as compared to 1.37 µg/cm2 of hydroxyapatite on glass without an intermediate silk sericin layer. [Figure not available: see fulltext.].Article Citation - WoS: 13Citation - Scopus: 11Valorization of Olive Tree Pruning Waste for Potential Utilization in Lithium Recovery From Aqueous Solutions(Springer, 2022) Nampeera, Jackline; Recepoğlu, Yaşar Kemal; Yüksel, AslıOlive tree pruning waste, mainly composed of olive branches, was converted into a value-added and sustainable product capable of lithium as a biosorbent through alkali treatment and phosphorylation reaction. Characterization studies were performed by SEM–EDX, XPS, FTIR, and TGA. Factors affecting biosorption mechanism, i.e., sorbent dosage, pH, initial Li+ concentration and temperature, and competitive ions’ presence, were investigated the synthesized functionalized olive branches (FOB). A commercial lithium selective resin, Lewatit TP 260, was also compared with FOB in batch and column studies. The Freundlich model fits adsorption isotherms better than the Langmuir model, with a maximum adsorption capacity of 6.7 mg/g at 30 °C and pH 7–8. Kinetic studies proved fast kinetics and equilibrium were attained in 6 min, while thermodynamic studies showed an exothermic (Δ Ho= - 17.52 kJ/ mol) , spontaneous reaction Δ Go< 0 at all temperatures), and increased randomness Δ So= + 24.27 J/ mol. K) at the interaction interface. Column studies revealed that although Lewatit TP 260 resin showed higher sorption capacity, its desorption efficiency (50.42%) was lower than that of FOB (99.9%), and the degree of column utilization of FOB (56.81%) was better than Lewatit TP 260 resin’s (16.0%). The findings were encouraging in the successful synthesis of a promising biosorbent from an abundant waste in Turkey for use in sustainable lithium recovery from aqueous sources. Graphical abstract: [Figure not available: see fulltext.]Article Citation - WoS: 5Citation - Scopus: 5Novel Biopolymer-Based Hydrogels Obtained Through Crosslinking of Keratose Proteins Using Tetrakis(hydroxymethyl) Phosphonium Chloride(Springer, 2022) Yalçın, Damla; Top, AybenMerino wool obtained from the Karacabey region of Turkey was solubilized using peracetic acid oxidation. The wool and extracted wool proteins (keratose) were characterized using SEM, XRD, TGA, and FTIR analyses. SDS-PAGE result of the keratose indicated diffusive bands were populated between ~ 40 and ~ 55 kDa, corresponding to low-sulfur content α-keratose proteins. Chemically crosslinked hydrogels were prepared using the keratose and tetrakis(hydroxymethyl) phosphonium chloride (THPC). Storage moduli of the hydrogels prepared at 1:1, 1:2, and 1:4 keratose to THPC reactive group ratios were measured as 63 ± 22, 291 ± 21, and 804 ± 53 Pa, respectively. Crosslinking degrees of the hydrogels also affected the secondary structures of the keratose films obtained from the drying of the hydrogels. The hydrogel with the highest crosslinking density (1:4 gel) exhibited the lowest swelling ratio, whereas the one with the lowest crosslinking density (1:1 gel) disintegrated in deionized water within less than 6 h. CCK-8 tests using L929 mouse fibroblast cells showed that all the hydrogels promoted cell proliferation. These results suggest THPC crosslinked hydrogels prepared at the millimolar THPC concentrations are biocompatible scaffolds, which can be utilized in drug delivery and tissue engineering applications. Graphical abstract: [Figure not available: see fulltext.]Article Citation - WoS: 7Citation - Scopus: 7Modification of Grape Pulp With Citric Acid for the Production of Natural Ion Exchanger Resin and Removal of Pb (ii) and Cd (ii) From Aqueous Solutions: Kinetic, Thermodynamics, and Mechanism(Springer, 2021) Arslanoğlu, Esra; Eren, Muhammet Ş. A.; Arslanoğlu, Hasan; Çiftçi, HarunIn this study, grape pulp (MGP) modified with NaOH and citric acid was used in the production of natural ion exchangers. The effects of parameters such as initial pH, MGP dosage, temperature, initial metal ion concentration, and contact time on the removal of Pb (II) and Cd (II) ions from aqueous solutions using modified materials were investigated by batch experiments. It was found that the experimental kinetic data fit the second-order model, and the activation energy for Pb (II) and Cd (II) adsorption processes were 20.68 and 38.61 kj mol(-1), respectively. Although the initial adsorption rate increases with increasing temperature, the adsorption efficiency slightly decreases. It was calculated that the equilibrium data fit the Langmuir isotherm better, and the maximum adsorption capacities for Pb (II) and Cd (II) adsorption processes were approximately 1.496 and 1.022 mmol g(-1) at 25 degrees C, respectively. Thermodynamic analysis has shown that the adsorption processes of Pb (II) and Cd (II) are exothermic (Delta H degrees(Pb) = -35.68 kj mol(-1), Delta H degrees(Cd) = -21.19 kj mol(-1)) and have a self-developing character.Article Citation - WoS: 15Citation - Scopus: 17Fabrication, Characterization, and Adsorption Applications of Low-Cost Hybride Activated Carbons From Peanut Shell-Vinasse Mixtures by One-Step Pyrolysis(Springer, 2021) Arslanoğlu, Esra; Eren, Muhammet Şakir Abdullah; Arslanoğlu, Hasan; Çiftçi, HarunThe present work aims to develop an innovative, alternative, fast, and cost-effective one-step pyrolysis method for activated carbon production using peanut shell and vinasse mixture. This facile procedure is based on single-step carbonization treatment at a temperature range of 400-800 degrees C. Different carbonization time (15-360 min), impregnation ratio (1-3 g/g), impregnation time (3-24 h), and nitrogen flow rate (300 and 600 ml/min) were examined. The chemical and physical properties of the activated carbon examined by SEM-EDX, FT-IR analysis, particle size distribution, iodine number, pH(zpc), BET surface area, and surface functional group analysis by Boehm's titration. The results illustrate that the values of BET surface area, total pore volume, average pore diameter, iodine number, pH(zpc), and carbon content of activated carbon were found as 1290.5 m(2)/g, 0.5667 cm(3)/g, 21.2 angstrom, 1258.4 mg/g, 5.7, and 86.89%, respectively.Article Citation - WoS: 13Citation - Scopus: 14Robust Fluorinated Siloxane Copolymers Via Initiated Chemical Vapor Deposition for Corrosion Protection(Springer, 2021) Cihanoğlu, Gizem; Ebil, ÖzgençHomopolymers of 2,4,6,8-tetramethyl-2,4,6,8-tetravinylcyclotetrasiloxane (V4D4), 2-(perfluorohexyl)ethyl acrylate (PFHEA) and 2-(perfluoroalkyl)ethyl methacrylate (PFEMA) and their copolymers were synthesized via initiated chemical vapor deposition (iCVD). All coatings exhibited excellent adhesion to substrates. The corrosion resistance of iCVD coatings was investigated by electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization measurements. In addition, chemical durability of various organic solvents and adhesion to the substrate were also evaluated. Tafel polarization measurements in 5 wt% NaCl solution revealed that the corrosion rates as low as 0.002 mpy on zinc substrates can be reached with 250-nm-thick iCVD-synthesized polymers which is lower than previously reported polymer coatings and more than three orders of magnitude lower than bare zinc. EIS analysis coupled with equivalent electric circuits model confirmed that poly(V4D4) and poly(PFHEA) homopolymers show extremely high protection efficiencies (similar to 99%) on zinc, while poly(V4D4-co-PFHEA) copolymer with slightly lower corrosion efficiency (85-91%) provides a better anticorrosion barrier with weight loss reduction by 57 and 45% for copper and zinc, respectively, and with improved chemical and mechanical properties. The results indicate that iCVD process enables fabrication of finely tuned fluorinated siloxane copolymer conformal coatings for corrosion protection on a variety of substrates.