Chemical Engineering / Kimya Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/14
Browse
11 results
Search Results
Article Citation - WoS: 6Citation - Scopus: 6Synthesis of a Novel Cellulose-Based Adsorbent From Olive Tree Pruning Waste for Removal of Boron From Aqueous Solution(Springer Science and Business Media Deutschland GmbH, 2024) Altınbaş, B.F.; Yüksel, A.This work investigated the valorization of olive tree pruning debris as a biosorbent for the removal of environmentally hazardous boron from aqueous solution using batch adsorption. For this purpose, a novel, waste-based, boron selective biosorbent from olive tree pruning waste (N-OPW) was synthesized. Alkali pretreatment, followed by glycidyl-methacrylate (GMA) grafting and providing boron selectivity with n-methyl-d-glucamine (NMDG) steps, was applied to the biomass, respectively. N-OPW was characterized using SEM, TGA, and FT-IR analyses. N-OPW showed excellent boron biosorption capacity (21.80 mg/g) in an operation pH range between 2 and 12. The equilibrium was attained in 2 h and the Freundlich isotherm (R2 = 0.997) and pseudo-second-order kinetics (R2 = 0.99) provided the strongest match to experimental data. According to thermodynamic studies, boron adsorption was exothermic (ΔH = −34.14 kJ/mol). The reusability tests with real geothermal water showed that adsorbent had no significant decrease in boron removal capacity while desorbing >99% of the boron adsorbed for three cycles of adsorption/desorption. Results indicated that a promising, reusable, and boron selective biosorbent was successfully synthesized while utilizing olive pruning waste. Graphical abstract: (Figure presented.) © The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature 2023.Article Citation - WoS: 15Citation - Scopus: 17Fabrication, Characterization, and Adsorption Applications of Low-Cost Hybride Activated Carbons From Peanut Shell-Vinasse Mixtures by One-Step Pyrolysis(Springer, 2021) Arslanoğlu, Esra; Eren, Muhammet Şakir Abdullah; Arslanoğlu, Hasan; Çiftçi, HarunThe present work aims to develop an innovative, alternative, fast, and cost-effective one-step pyrolysis method for activated carbon production using peanut shell and vinasse mixture. This facile procedure is based on single-step carbonization treatment at a temperature range of 400-800 degrees C. Different carbonization time (15-360 min), impregnation ratio (1-3 g/g), impregnation time (3-24 h), and nitrogen flow rate (300 and 600 ml/min) were examined. The chemical and physical properties of the activated carbon examined by SEM-EDX, FT-IR analysis, particle size distribution, iodine number, pH(zpc), BET surface area, and surface functional group analysis by Boehm's titration. The results illustrate that the values of BET surface area, total pore volume, average pore diameter, iodine number, pH(zpc), and carbon content of activated carbon were found as 1290.5 m(2)/g, 0.5667 cm(3)/g, 21.2 angstrom, 1258.4 mg/g, 5.7, and 86.89%, respectively.Article Citation - WoS: 5Citation - Scopus: 6Development of an Optical Tyrosinase Biosensor (tca) for Detection of “parathion-Methyl”(Emerald Group Publishing Ltd., 2019) Polatoğlu, İlker; Çakıcıoğlu Özkan, FehimePurpose: This paper aims to present a novel and cost-effective optical biosensor design by simple preparation method for detection of “parathion-methyl,” which is a model pesticide pose to public health and the environment. Design/methodology/approach: The optical enzyme biosensor (TCA) for detection of pesticide “parathion-methyl” was developed on the basis of immobilization of tyrosinase enzyme on chitosan film by adsorption technique. The analytic performance of TCA was investigated by measuring its activity with Ultraviolet (UV) visible spectrophotometer. Findings: Uniform porous network structure and protonated groups of chitosan film provided a microenvironment for tyrosinase immobilization evident from Fourier transform infrared (FTIR) spectroscopy and Atomic Force Microscopy analysis. TCA has a wide linear detection range (0-1.03 µM) with high correlation coefficient and it can detect the parathion-methyl concentration as low as 159 nM by noncompetitive inhibition kinetics. Using the TCA sensor both for ten times and at least 45 days without a significant loss in its activity are the indicators of its good operational and storage stability. Moreover, TCA can be applicable to tap water, providing a promising tool for pesticides detection. Originality/value: This is the first time to use the in situ analytical technique that can improve the performance of optical enzyme sensor provided to control the pesticide residue better with respect to traditional techniques. The effect of organic solvents on the performance of optical enzyme biosensor was investigated. Inhibition kinetic of the solvents rarely encountered in literature was also studied besides the pH and temperature tolerance of the optical biosensor.Article Citation - WoS: 23Citation - Scopus: 29Dynamic Nature of Supercritical Co2 Adsorption on Coals(Springer Verlag, 2017) Özdemir, EkremAdsorption on non-rigid solids was shown to be a dynamic process. Excess adsorption and desorption isotherms of CO2 on eight Argonne Premium coal samples were measured at 55 °C and pressures up to 14 MPa by manometric method. The excess adsorption isotherms of CO2 on powdered coals showed almost Langmuir-like to rectilinear shape behavior at low pressures up to 9 MPa, and it increased noticeably at pressures higher than 9 MPa. There was a significant hysteresis between the excess adsorption and desorption isotherms for each rank of coals, which was related to the volumetric uncertainties occurring during the adsorption isotherm measurements. The parameters related to the adsorption capacity and micro porous characteristics of the coal were obtained at different pressure ranges by fitting the experimental data to the modified Dubinin-Astakhov (D-A) equation at the increasingly larger pressure ranges, using only the first 4 data points of the excess adsorption isotherm initially, and progressively using additional data points for the subsequent values. It was shown that the curve fit parameters vary with pressure, and therefore, concluded that the adsorption on non-rigid solids such as CO2 on coal is indeed a dynamic process. It was suggested that new adsorption isotherm equations need to be developed considering the dynamic nature of the adsorption on solid adsorbents.Article Citation - WoS: 5Citation - Scopus: 5Methylene Blue Adsorption From Aqueous Solutions To Flexible Poly(vinyl Chloride) Silica Composites(John Wiley and Sons Inc., 2015) Yetgin, Senem; Ulutan, Sevgi; Balköse, DevrimMethylene blue (MB) adsorption studies were performed with poly(vinyl chloride)-(dioctyl phthalate)-silica composites, which were obtained by using plastisol-plastigel technology. The films were flexible, having elastic modulus of 1.0-1.5 GPa. Diminishing MB concentration in the aqueous phase was followed as the adsorption process advanced by using visible spectroscopy. Contributions of the individual components of the composites to adsorption were also investigated. Although the MB adsorption capacity was extensively high for silica, it was moderate for the composite, most likely owing to the occlusion of pores of silica by plasticizer to some extent. The improvement of MB adsorption capacity of the composites as the silica ratio increased was explicitly deduced from the optical microscopy photographs. The diffusion coefficients of MB through the composites were 5 × 10-13, 6 × 10-13, and 3 × 10-13 m2 s-1 with regression coefficients of 0.73, 0.89, and 0.88 for 0, 2, and 16% silica-containing composites, respectively. Because of the slow diffusion of MB in poly(vinyl chloride)-silica composites, using them as dynamic column adsorbent was not practical. However, these versatile plastics can be used as plastic labels, colored clothing, leather substitutes, antimicrobial medical devices, and laser printable surfaces.Article Citation - WoS: 14Citation - Scopus: 25Kinetic and Equilibrium Studies of Adsorption of Ss-Glucuronidase by Clinoptilolite-Rich Minerals(Elsevier Ltd., 2015) Demirbüker Kavak, Dilek; Ülkü, SemraThe adsorption of the bacterial β-glucuronidase (GUS) enzyme, which is thought to be responsible for the production of reactive metabolites related to some diseases and cancer development, by clinoptilolite-rich mineral was investigated. Batch experiments were performed to analyze of the effects of the clinoptilolite amount and particle size, initial GUS concentration, shaking rate, pH and temperature on the adsorption equilibrium and kinetics. Adsorption equilibrium data were interpreted in terms of Langmuir and Freundlich isotherms; and they were well represented by the Langmuir isotherm model. The percentage of GUS removal by the clinoptilolite-rich mineral was changed in the range of 9.4-54.4% depending on its initial concentration. The kinetic data were analyzed using external film diffusion, intraparticle diffusion, pseudo-first-order and pseudo-second-order models and both external film and intraparticle diffusion appeared to be effective in GUS adsorption. Thermodynamic studies indicated that GUS adsorption is exothermic, physical and spontaneous at the temperatures investigated (288-310 K)Article Citation - WoS: 1Citation - Scopus: 1Flexible Pvc-Silica Composites as an Adsorptive Material for Water Soluble Dyes(Smithers Rapra Technology, 2013) Ulutan, Sevgi; Yetgin, Senem; Balköse, DevrimMethylene Blue (MB) adsorption studies were performed on flexible Polyvinyl Chloride/Silica composites which were obtained by using plastisol-plastigel technology. Change of MB concentration in aqueous phase as the adsorption process advanced was followed by using visible spectroscopy. The diffusion of MB through the composites exhibited non-Fickian behavior with a diffusivity of 10-11 m2s-1. Making use of such PVC-silica composite sheets as column packing, the packing time will be reduced and the surface available for diffusion will be increased. © 2013 Smithers Rapra Technology.Article Citation - WoS: 21Citation - Scopus: 23Adsorption of Anionic Polyelectrolyte and Comb Polymers Onto Lead Magnesium Niobate(Elsevier Ltd., 2008) Şakar-Deliormanlı, Aylin; Çelik, Erdal; Polat, MehmetThis paper presents the results concerning the adsorption mechanism of polyacrylic acid (PAA) and polyacrylic acid/polyethylene oxide (PAA/PEO) comb polymer onto lead magnesium niobate (PMN) powders. In the study adsorption behavior of PAA and PAA/PEO onto PMN surface were determined in aqueous solutions and the influence of pH and ionic strength was investigated. Results showed that adsorption of PAA or PAA/PEO increased with decreasing pH of the suspensions. The increase in the ionic strength or the presence of divalent cations caused an increase in the adsorption of both polyelectrolytes. It was observed that the adsorption reaches a maximum when PAA is fully complexed in solution. On the other hand, the increase in the adsorption of PAA/PEO onto PMN in the presence of monovalent or divalent salt was attributed to the decrease in the electrostatic forces rather than complex formation with the divalent metal ions in solution. Turbidity measurements showed that there is no complex formation between the divalent metal ions and PAA/PEO comb polymers due to shielding effect of the PEO teeth.Article Citation - WoS: 8Citation - Scopus: 10Moisture Sorption and Thermal Characteristics of Polyaramide Blend Fabrics(John Wiley and Sons Inc., 2006) Genç, Gözde; Alp, Burcu; Balköse, Devrim; Ülkü, Semra; Cireli, AysunFour types of fabrics woven from various polyaramid fibers of Nomex and Kevlar blends were characterized by morphology, XRD, elemental analysis, thermal analysis, and moisture adsorption isotherms. The blends consisted of Polybenzimidazole/ Kevlar blend (40% FBI and 60% Kevlar®), Nomex Delta A (blend of 60% Kevlar and 40% Nomex®), Nomex Delta T (blend of 75% Nomex, 23% Kevlar, and 2% P140 antistatic fiber), and Nomex III (fabric with a 95/5 blend of Nomex and Kevlar) containing 1% steel fiber. TGA and DTG curves have been compared to evaluate thermal behavior of the FBI, Kevlar, and Nomex blends and the resuls were correlated with the moisture sorption data. The data were also compared with fiber morphologies provided by SEM and crystallinities derived from XRD diffrac tograms. Moisture adsorption isotherms were correlated with a number of empirical models, including Nernst, Freundlich, Handersen, Iglesias-Chirife, and with the models having a theoretical background such as Langmuir, BET, GAB, and Hüttig. The linear regression models were statistically analyzed to obtain the best fitting model that explains the sorption profiles of the samples and theoretical monolayer moisture capacities of Nomex and Kevlar blends were calculated by using Hüttig isotherms.Conference Object Citation - WoS: 16Citation - Scopus: 21Co2 and N2 Adsorption on the Acid (hcl, Hno 3, H2so4 and H3po4) Treated Zeolites(Springer Verlag, 2005) Ertan, Aslı; Özkan, Seher Fehime ÇakıcıoğluCO2 and N2 adsorption on the acid treated natural and synthetic zeolites at 5◦C and 25◦C was studied. The system heterogeneity was higher for CO2 than N2 adsorption and decreased with acid treatment.