Chemical Engineering / Kimya Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/14
Browse
6 results
Search Results
Article Citation - WoS: 7Citation - Scopus: 7Insights Into Sustainability of Engineered Carbonaceous Material-Based Technologies for Advanced Cyanide Removal From Wastewater(Elsevier, 2023) Yoon, Yeojoon; Khataee, Alireza; Gören, Ayşegül Yağmur; Recepoğlu, Yaşar KemalCyanide (CN) is a serious concern in industrial and goldmine wastewater. Strict regula-tory standards have been established by various agencies due to the detrimental effects that CN has on human health. Therefore, before discharge to water bodies or land, it is essential to create a sus-tainable model for the safe removal of CN. Carbon-based materials are well known for their adsorption and oxidation features, which can be conducive to CN removal. This paper reviews the relevant literature on the application of modified and unmodified carbon-based materials to CN removal in water; these materials include activated carbon (AC), graphene, graphene oxide (GO), and carbon nanotubes (CNTs). Moreover, CN removal mechanisms and photocatalytic removal of CN are comprehensively discussed, with a particular emphasis on modifying carbon-based materials. It has been observed that adding various elements to carbon-based materials improves their surface area, functional groups, CN adsorption capacity, and pore volume. Impacts of operational parameters, isotherm models, kinetics, and types of carbon-based materials are also outlined. This study provides insight into the real-scale applicability of carbon-based materials for CN removal from waters. Moreover, this review indicates that essential work on CN removal using carbon-based materials is still needed. Future research should focus on developing modified carbon-based materials to encourage multidisciplinary research. The most crucial gap in the literature is that the studies have been performed on a lab scale. Therefore, further pilot and real-scale applica-tions should be conducted. Overall, the cost assessment, environmental effects, and human health risks of carbon-based materials should be studied in future research to achieve a realistic perspective on applicability on an industrial scale.(c) 2023 THE AUTHORS. Published by Elsevier BV on behalf of Faculty of Engineering, Alexandria University This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/ licenses/by-nc-nd/4.0/).Article Citation - WoS: 32Citation - Scopus: 36A Review of Boron Removal From Aqueous Solution Using Carbon-Based Materials: an Assessment of Health Risks(Elsevier, 2022) Gören, Ayşegül Yağmur; Recepoğlu, Yaşar Kemal; Karagündüz, Ahmet; Khataee, Alireza; Yoon, YeojoonCarbon-based compounds have gained attention of researchers for use in boron removal due to their properties, which make them a viable and low cost adsorbent with a high availability, as well as environmental friendliness and high removal efficiency. The removal of boron utilizing carbon-based materials, including activated carbon (AC), graphene oxide (GO), and carbon nanotubes (CNTs), is extensively reviewed in this paper. The effects of the operating conditions, kinetics, isotherm models, and removal methods are also elaborated. The impact of the modification of the lifetime of carbon-based materials has also been explored. Compared to unmodified carbon based materials, modified materials have a significantly higher boron adsorption capability. It has been observed that adding various elements to carbon-based materials improves their surface area, functional groups, and pore volume. Tartaric acid, one of these doped elements, has been employed to successfully improve the boron removal and adsorption capabilities of materials. An assessment of the health risk posed to humans by boron in treated water utilizing carbon-based materials was performed to better understand the performance of materials in real-world applications. Furthermore, the boron removal effectiveness of carbon-based materials was evalu ated, as well as any shortcomings, future perspectives, and gaps in the literature.Article Citation - WoS: 56Citation - Scopus: 64Carbonaceous Materials for Removal and Recovery of Phosphate Species: Limitations, Successes and Future Improvement(Pergamon-Elsevier Science Ltd, 2022) Recepoğlu, Yaşar Kemal; Gören, Ayşegül Yağmur; Orooji, Yasin; Khataee, AlirezaThe carbonaceous materials have gained significant interest for the phosphorus species remediation and recovery in the last decade. Carbonaceous materials present many unique features, such as cost effective, availability, environmentally friendly, and high removal efficiency that make them a promising adsorbent. In this review, the recent application of carbonaceous materials including activated carbon (AC), graphene and graphene oxide (GO), lignin, carbon nanotubes (CNTs), and gC(3)N(4) for phosphate removal and recovery were comprehensively summarized. The kinetics and isotherm models, removal mechanisms, and effects of operating parameters are reported. The reusability, lifetime of carbonaceous materials, and impact of modification were also considered. The modified carbonaceous materials have significantly high phosphate adsorption capacity compared to unmodified adsorbents. Namely, MgO-functionalized lignin-based bio-charcoal exhibited a 906.8 mg g(-1) of capacity as the highest one among other reviewed materials. The modification of carbonaceous materials with various elements has been presented to improve the surface functional groups, surface area and charge, and pore volume and size. Among these loaded elements, iron has been effectively used to provide a prospect for magnetic recovery of the adsorbent as well as increase phosphate adsorption. Furthermore, the phosphate recovery methods, phosphate removal efficiency of carbonaceous materials, the limitations, important gaps in the literature, and future studies to enhance applicability of carbonaceous materials in real scale are also discussed.Article Citation - WoS: 15Citation - Scopus: 17Fabrication, Characterization, and Adsorption Applications of Low-Cost Hybride Activated Carbons From Peanut Shell-Vinasse Mixtures by One-Step Pyrolysis(Springer, 2021) Arslanoğlu, Esra; Eren, Muhammet Şakir Abdullah; Arslanoğlu, Hasan; Çiftçi, HarunThe present work aims to develop an innovative, alternative, fast, and cost-effective one-step pyrolysis method for activated carbon production using peanut shell and vinasse mixture. This facile procedure is based on single-step carbonization treatment at a temperature range of 400-800 degrees C. Different carbonization time (15-360 min), impregnation ratio (1-3 g/g), impregnation time (3-24 h), and nitrogen flow rate (300 and 600 ml/min) were examined. The chemical and physical properties of the activated carbon examined by SEM-EDX, FT-IR analysis, particle size distribution, iodine number, pH(zpc), BET surface area, and surface functional group analysis by Boehm's titration. The results illustrate that the values of BET surface area, total pore volume, average pore diameter, iodine number, pH(zpc), and carbon content of activated carbon were found as 1290.5 m(2)/g, 0.5667 cm(3)/g, 21.2 angstrom, 1258.4 mg/g, 5.7, and 86.89%, respectively.Article Citation - WoS: 41Citation - Scopus: 42Fructose Dehydration To 5-Hydroxymethylfurfural Over Sulfated Tio2-Sio2, Ti-Sba Zro2, Sio2, and Activated Carbon Catalysts(American Chemical Society, 2015) Kılınç, Emre; Yılmaz, SelahattinDifferent sulfated catalysts including SO4/TiO2-SiO2, SO4/Ti-SBA-15, SO4/ZrO2, SO4/AC, and SO4/SiO2 were tested in fructose dehydration to 5-hydroxymethylfurfural (HMF). Reactions were carried out in dimethyl sulfoxide (DMSO) at 110 °C. Characterization results indicated that no sulfur leaching was observed from SO4/ZrO2, SO4/TiO2-SiO2, and SO4/Ti-SBA-15 catalysts in the reaction tests. The SO4/TiO2-SiO2 catalyst had a high amount of strong acid sites and the highest amount of Bronsted sites. The highest selectivity to HMF at high conversion, that is, 89% selectivity at 77% fructose conversion was obtained over this catalyst. It preserved its activity after four times reuse.Activated carbonCarbonCatalystsDehydrationArticle Citation - WoS: 21Citation - Scopus: 23Activated Carbon Adsorption of Fuel Oxygenates Mtbe and Etbe From Water(Springer Verlag, 2009) İnal, Fikret; Yetgin, Senem; Aksu, Gülsüm T.; Şimşek, Selvi; Sofuoğlu, Aysun; Sofuoğlu, Sait CemilThe aqueous phase adsorption of fuel oxygenates methyl tertiary butyl ether (MTBE) and ethyl tertiary butyl ether (ETBE) onto commercially available granular activated carbon (GAC; Norit GAC 1240) was investigated in a batch system at 27°C. The oxygenate concentrations were determined by headspace gas chromatography/mass spectrometry analyses. The experimental data were used with four two-parameter isotherm models (Langmuir, Freundlich, Temkin, and Dubinin-Radushkevich) and two kinetic models (pseudo first-order and pseudo second-order) to determine equilibrium and kinetic parameters. Considering the correlation coefficient and root mean square error, Dubinin-Radushkevich isotherm showed better fit with the equilibrium data for MTBE. However, the performances of Langmuir and Dubinin-Radushkevich models were comparable for ETBE. The adsorption capacities were calculated as 5.50 and 6.92 mg/g for MTBE and ETBE, respectively, at an equilibrium solution concentration of 1 mg/L using Dubinin-Radushkevich isotherm. The differences between the model predictions and experimental data were similar for the pseudo first-order and pseudo second-order kinetic models. Gibbs free-energy changes of adsorption were found to be -22.59 and -28.55 kJ/mol for MTBE-GAC and ETBE-GAC systems, respectively, under the experimental conditions studied.