Chemical Engineering / Kimya Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/14
Browse
4 results
Search Results
Article Citation - WoS: 17Citation - Scopus: 16Synthesis, Characterization and Adsorption Studies of Phosphorylated Cellulose for the Recovery of Lithium From Aqueous Solutions(Editura Acad Romane, 2021) Recepoğlu, Yaşar Kemal; Yüksel, AslıIn this study, pristine cellulose was functionalized by the phosphorylation reaction to make it suitable for lithium separation. After characterization studies of the synthesized adsorbent with SEM, EDX, FTIR, TGA and XPS, the effects of various parameters on the lithium uptake capacity of the adsorbent were examined. The analysis of equilibrium data by several adsorption models showed that maximum adsorption capacity of the adsorbent was found to be 9.60 mg/g at 25 degrees C by the Langmuir model. As initial concentration and contact time increased, adsorption capacity also increased, however, mild temperature (25-35 degrees C) and pH (5-6) were better for the adsorption of lithium. 80% of lithium adsorption within three minutes proved the fast kinetic nature of the adsorbent. A 99.5% desorption efficiency of lithium was achieved with 0.5 M H2SO4, among HCl and NaCl with different molarities. Phosphorylated cellulose was shown to be a favorable adsorbent for the recovery of lithium from aqueous solutions.Article Citation - WoS: 5Citation - Scopus: 6Development of an Optical Tyrosinase Biosensor (tca) for Detection of “parathion-Methyl”(Emerald Group Publishing Ltd., 2019) Polatoğlu, İlker; Çakıcıoğlu Özkan, FehimePurpose: This paper aims to present a novel and cost-effective optical biosensor design by simple preparation method for detection of “parathion-methyl,” which is a model pesticide pose to public health and the environment. Design/methodology/approach: The optical enzyme biosensor (TCA) for detection of pesticide “parathion-methyl” was developed on the basis of immobilization of tyrosinase enzyme on chitosan film by adsorption technique. The analytic performance of TCA was investigated by measuring its activity with Ultraviolet (UV) visible spectrophotometer. Findings: Uniform porous network structure and protonated groups of chitosan film provided a microenvironment for tyrosinase immobilization evident from Fourier transform infrared (FTIR) spectroscopy and Atomic Force Microscopy analysis. TCA has a wide linear detection range (0-1.03 µM) with high correlation coefficient and it can detect the parathion-methyl concentration as low as 159 nM by noncompetitive inhibition kinetics. Using the TCA sensor both for ten times and at least 45 days without a significant loss in its activity are the indicators of its good operational and storage stability. Moreover, TCA can be applicable to tap water, providing a promising tool for pesticides detection. Originality/value: This is the first time to use the in situ analytical technique that can improve the performance of optical enzyme sensor provided to control the pesticide residue better with respect to traditional techniques. The effect of organic solvents on the performance of optical enzyme biosensor was investigated. Inhibition kinetic of the solvents rarely encountered in literature was also studied besides the pH and temperature tolerance of the optical biosensor.Article Citation - WoS: 8Citation - Scopus: 10Moisture Sorption and Thermal Characteristics of Polyaramide Blend Fabrics(John Wiley and Sons Inc., 2006) Genç, Gözde; Alp, Burcu; Balköse, Devrim; Ülkü, Semra; Cireli, AysunFour types of fabrics woven from various polyaramid fibers of Nomex and Kevlar blends were characterized by morphology, XRD, elemental analysis, thermal analysis, and moisture adsorption isotherms. The blends consisted of Polybenzimidazole/ Kevlar blend (40% FBI and 60% Kevlar®), Nomex Delta A (blend of 60% Kevlar and 40% Nomex®), Nomex Delta T (blend of 75% Nomex, 23% Kevlar, and 2% P140 antistatic fiber), and Nomex III (fabric with a 95/5 blend of Nomex and Kevlar) containing 1% steel fiber. TGA and DTG curves have been compared to evaluate thermal behavior of the FBI, Kevlar, and Nomex blends and the resuls were correlated with the moisture sorption data. The data were also compared with fiber morphologies provided by SEM and crystallinities derived from XRD diffrac tograms. Moisture adsorption isotherms were correlated with a number of empirical models, including Nernst, Freundlich, Handersen, Iglesias-Chirife, and with the models having a theoretical background such as Langmuir, BET, GAB, and Hüttig. The linear regression models were statistically analyzed to obtain the best fitting model that explains the sorption profiles of the samples and theoretical monolayer moisture capacities of Nomex and Kevlar blends were calculated by using Hüttig isotherms.Article Citation - WoS: 10Citation - Scopus: 11Use of Clinoptilolite in Ethanol Dehydration(Taylor and Francis Ltd., 1996) Tıhmınlıoğlu, Funda; Ülkü, SemraClinoptilolite-type natural zeolite, which exists in various regions of Turkey, has been experimentally studied. For the ethanol-water-local clinoptilolite system, uptake and breakthrough curves were determined under a nitrogen gas atmosphere. In adsorption kinetics and adsorption equilibrium studies, the effects of particle size, temperature and, amount of zeolite on the uptake rate have been investigated. The breakthrough curves for four different flow rates of ethanol and three different bed heights were determined in dynamic column studies. The results of the experiments show that intraparticle diffusion is the main resistance. The local clinoptilolite is a promising adsorbent for water adsorption from aqueous ethanol.