Electrical - Electronic Engineering / Elektrik - Elektronik Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/11
Browse
48 results
Search Results
Conference Object Adaptive Limited Feedback Scheme for Stream Selection Based Interference Alignment in Heterogeneous Networks(IEEE, 2016) Beyazıt, Esra Aycan; Özbek, Berna; Le Ruyet,D.This paper presents a stream selection based interference alignment approach with imperfect channel state information for heterogeneous networks. The proposed algorithm performs the selection of a stream sequence among a predetermined set of sequences. Those selected sequences are the ones that mostly contribute to the sum rate when performing the exhaustive search. These stream sequences form a regular structure where the first stream is associated to a pico user. The effect of imperfect channel state information on the proposed algorithm is analyzed and a bit allocation scheme is proposed by deriving an upper bound on the rate loss due to quantization. © 2016 IEEE.Article Citation - WoS: 3Citation - Scopus: 4Liquid Metal-Controlled Dual-Band Doppler Radar for Enhanced Velocity Measurement(IEEE, 2024) Karatay, Anıl; Yaman, FatihDoppler radars, which are critical instruments for velocity measurement, may need to be reconfigured to adapt to different environmental conditions or for ease of use. However, conventional electrical, optical, and physical reconfiguration methods often come with several disadvantages such as deteriorated radiation pattern, reduced radiation efficiency, and high cost. Therefore, the aim of this article is to integrate microwave components that can be controlled using liquid metal (LM) displacement into a Doppler radar to adjust its main lobe direction and operating frequency to the desired values and enhance the measurement capacity of the respective radar. Through this study, multiple parameters of an operational Doppler radar have been simultaneously adjusted using LM displacement exploitation for the first time, thus avoiding the shortcomings associated with conventional reconfiguration methods. To achieve this objective, initially, a back-to-back Vivaldi antenna operating at 2.45 GHz is designed, and beam switching ability is imparted to the structure using the LM displacement method. Subsequently, various techniques are used to convert the structure into a dual-band antenna capable of simultaneous operation at 2.45 and 5.8 GHz, ensuring the desired beam switching feature at both the frequencies. In addition, a power divider capable of switching between the two operating frequencies through LM assistance is proposed, and its integration into the radar system enables the control of both main lobe direction and frequency using the proposed method.Article Citation - WoS: 27Citation - Scopus: 34A New Method for Gan-Based Data Augmentation for Classes With Distinct Clusters(Pergamon-Elsevier Science Ltd, 2024) Kuntalp, Mehmet; Düzyel, OkanData augmentation is a commonly used approach for addressing the issue of limited data availability in machine learning. There are various methods available, including classical and modern techniques. However, when applying modern data augmentation methods, such as Generative Adversarial Neural Networks (GANs), to a class specific data, the resulting data can exhibit structural discrepancies. This study explores a different use of GANs as a data augmentation method that solves this problem using the electrocardiogram (ECG) signals in the MITBIH arrhythmia dataset as the example. We begin by examining the cluster structure of a specific class using tDistributed Stochastic Neighbor (t-SNE) method. Based on this cluster structure, we propose a new method for applying GANs to augment data for that class. We assess the effect of our method in a classification task using 1-D Convolutional Neural Network (CNN), Support Vector Machine (SVM), One vs one classifier (Ovo), K-Nearest Neighbors (KNN), and Random Forest as the classifiers. The results demonstrate that our proposed method could lead to better classification performance if a specific class has distinct clusters when compared to normal use of GANs.Article Citation - WoS: 5Citation - Scopus: 7Adaptive Resizer-Based Transfer Learning Framework for the Diagnosis of Breast Cancer Using Histopathology Images(Springer, 2023) Düzyel, Okan; Çatal, Mehmet Sergen; Kayan, Ceyhun Efe; Sevinç, Arda; Gümüş, AbdurrahmanBreast cancer is a major global health concern, and early and accurate diagnosis is crucial for effective treatment. Recent advancements in computer-assisted prediction models have facilitated diagnosis and prognosis using high-resolution histopathology images, which provide detailed information on cancerous tissue. However, these high-resolution images often require resizing, leading to potential data loss. In this study, we demonstrate the effect of a learnable adaptive resizer for breast cancer classification using the BreakHis dataset. Our approach incorporates the adaptive resizer with various convolutional neural network models, including VGG16, VGG19, MobileNetV2, InceptionResnetV2, DenseNet121, DenseNet201, and EfficientNetB0. Despite producing visually less appealing images, the learnable resizer effectively improves classification performance. DenseNet201, when jointly trained with the adaptive resizer, achieves the highest accuracy of 98.96% for input images of 448x448 resolution. Our experimental results demonstrate that the adaptive resizer performs better at a magnification factor of 40x compared to higher magnifications. While its effectiveness becomes less pronounced as image resolution increases to 100x, 200x, and 400x, the adaptive resizer still outperforms bilinear interpolation. In conclusion, this study highlights the potential of adaptive resizers in enhancing performance for medical image classification. By outperforming traditional image resizing methods, our work contributes to the advancement of deep neural networks in the field of breast cancer diagnostics.Article Citation - WoS: 2Citation - Scopus: 2Subwavelength Thickness Characterization of Curved Dielectric Films Exploiting Spatially Structured Entangled Photons(Optica Publishing Group, 2023) Ataç, Enes; Dinleyici, Mehmet SalihPrecise determination of thin dielectric film optical properties is a critical issue for fiber optic sensor technologies. However, conventional methods for the optical characterization of these films not only are generally complex and tedious processes on curved surfaces but also require well-calibrated and overly sophisticated devices. We, on the other hand, propose a novel and practical quantum-based phase diffraction scheme to characterize the thickness of ultra-thin transparent dielectric films coated on an optical fiber beyond the classical diffraction limits in this paper. The approach is implemented by evaluating the effect of thickness variations on the highly visible two-photon diffraction pattern's zero crossings and amplitudes. The mathematical model and numerical simulations con-tribute to a better understanding of how the spatially structured entangled photons improve thickness precision with the help of intensity correlations and a confocal aperture. To prove the impact of the proposed system, it is compared with the classical phase diffraction method in the literature via simulations. According to the results, the thickness of the transparent dielectric films can be accurately estimated below one-twentieth of the wavelength of interest. & COPY; 2023 Optica Publishing GroupArticle Citation - WoS: 2Citation - Scopus: 2A Non-Resonant Approach for Dielectric Constant Reconstructions Via Newton Iterations(Elsevier, 2023) Özkal, Ceren; Yaman, FatihIn this study, a Newton–Raphson-based iterative method has been proposed to obtain dielectric constants accurately from measurements. The originalities of the approach lie in its applicability at non-resonant frequencies, which brings a significant experimental simplicity by avoiding critical coupling, expansion of available frequencies in different bands with the same cost-efficient low-Q (?60) cavity. The direct problem involves either measuring power values inside a cavity (14.6 × 5 × 20.6) cm via a spectrum analyzer or simulating the complete setup via CST-MWS software at one of the non-resonant modes, 1.5 GHz. The solution to the inverse problem provides fastly converging results with an error rate of 1% for the unknown permittivities. The experiments were carried out using five different liquid samples even though the proposed technique does not have a limitation on solid materials. Applicability and the effectiveness of the introduced method is illustrated in detail and comparisons with the perturbation method is provided. © 2023 Elsevier GmbHArticle Citation - WoS: 6Citation - Scopus: 7Time-Resolved Eeg Signal Analysis for Motor Imagery Activity Recognition(Elsevier, 2023) Olcay, Bilal Orkan; Karaçalı, BilgeAccurately characterizing brain activity requires detailed feature analysis in the temporal, spatial, and spectral domains. While previous research has proposed various spatial and spectral feature extraction methods to distinguish between different cognitive tasks, temporal feature analysis for each separate brain region and frequency band has been largely overlooked. This study introduces two novel approaches for recognizing cognitive activity: temporal entropic profiling and time-aligned common spatio-spectral patterns analysis. These approaches capture and use discriminative short-lived signal segments for motor imagery activity recognition. In Approach-1, we evaluated nine different measures to determine timing parameters that showed altered behavior associated with maximal inter-activity differences, which we then used in a machine-learning framework. In Approach-2, we used the best-performing signal characteristic measures from Approach-1 to determine the optimum latency of each channel at each frequency band for a CSP-based activity recognition strategy. We evaluated both approaches on two online available motor imagery EEG datasets and achieved average recognition accuracy levels of 86%. We compared our methods with four established BCI methods. The performance results show that our approaches exceeded the benchmark methods' performances, with notable improvements in the proposed time-aligned common spatio-spectral patterns approach. This study demonstrates that motor imagery recognition performance is improved when a temporal analysis is adopted alongside spatio-spectral neural feature analysis and that timing parameters associated with the maximal entropic difference of EEG segments to the cognitive tasks varied between different brain regions and subjects. © 2023 Elsevier LtdArticle Citation - WoS: 3Citation - Scopus: 4Cost-Effective Experiments With Additively Manufactured Waveguide and Cavities in the S-Band(Iop Publishing Ltd, 2023) Karatay, Anıl; Yilmaz, Hasan Önder; Özkal, Ceren; Yaman, FatihThis study demonstrates the applicability of additively manufactured components that are metalized with conductive tape for two different microwave experiments. We focus on dielectric measurements and prototyping elliptical accelerator cavities at a low power regime for 2.45 GHz. To illustrate the accuracy of our results for the commonly used solid/liquid materials in engineering and to compare the fundamental accelerator cavity parameters with previous research rectangular and elliptic 3D-printed cavities coated with aluminum-type tape were employed in the experiments. Results reported for the complex-valued permittivities and specific design parameters for the cavity prototype are consistent with the literature. Various approaches to obtain the conductivity value of the tape and the effect of the roughness/thickness of the coating on the reflection parameter are discussed in detail. We confirm the effectiveness of the proposed approach, which reduces costs and provides a high degree of accuracy for investigated applications.Conference Object Citation - Scopus: 1Interference Mitigation for Device-To Based Cellular Communications(IEEE, 2022) Acar, Süleyman Onur; Özbek, BernaDevice-to-device (D2D) communication underlaying cellular networks can improve the performance of cellular systems and it provides an effective way to meet growing mobile traffic and capacity demand. When user equipments are located in close proximity, they can communicate through direct links. In this case, D2D links can increase both energy and spectrum efficiency by reusing uplink (UL) cellular resources while satisfying the users' quality-of-service requirements. However, integrating D2D links into the cellular infrastructure causes an interference since D2D communication can increase co-channel interference and degrade cellular users' transmission link quality. In this paper, the interference mitigation techniques including power control, multiple antenna and resource allocation based on graph coloring are proposed for D2D communications underlaying cellular systems to increase the data rate of both the cellular users and D2D pairs. Compared to the prior works, in the proposed algorithm, D2D and cellular users have same priority for resource allocation. Finally, the proposed algorithm improves the overall system capacity significantly.Article Citation - WoS: 4Citation - Scopus: 5Toward Safe and High-Performance Human-Robot Collaboration Via Implementation of Redundancy and Understanding the Effects of Admittance Term Parameters(Cambridge University Press, 2022) Kanık, Mert; Ayit, Orhan; Dede, Mehmet İsmet Can; Tatlıcıoğlu, EnverSummary Today, demandsin industrial manufacturing mandate humans to work with large-scale industrial robots, and this collaboration may result in dangerous conditions for humans. To deal with this situation, this work proposes a novel approach for redundant large-scale industrial robots. In the proposed approach, an admittance controller is designed to regulate the interaction between the end effector of the robot and the human. Additionally, an obstacle avoidance algorithm is implemented in the null space of the robot to prevent any possible unexpected collision between the human and the links of the robot. After safety performance of this approach is verified via simulations and experimental studies, the effect of the parameters of the admittance controller on the performance of collaboration in terms of both accuracy and total human effort is investigated. This investigation is carried out via 8 experiments by the participation of 10 test subjects in which the effect of different admittance controller parameters such as mass and damper are compared. As a result of this investigation, tuning insights for such parameters are revealed.