Electrical - Electronic Engineering / Elektrik - Elektronik Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/11
Browse
6 results
Search Results
Article Citation - WoS: 1Maximum Average Entropy-Based Quantization of Local Observations for Distributed Detection(Elsevier, 2022) Wahdan, Muath A.; Altınkaya, Mustafa AzizIn a wireless sensor network, multilevel quantization is necessary to find a compromise between minimizing the power consumption of sensors and maximizing the detection performance at the fusion center (FC). The previous methods have been using distance measures such as J-divergence and Bhattacharyya distance in this quantization. This work proposes a different approach based on the maximum average entropy of the output of the sensors under both hypotheses and utilizes it in a Neyman-Pearson criterion-based distributed detection scheme to detect a point source. The receiver operating characteristics of the proposed maximum average entropy (MAE) method in quantizing sensor outputs have been evaluated for multilevel quantization both when the sensor outputs are available error-free at the FC and when non-coherent M-ary frequency shift keying communication is used for transmitting MAE based multilevel quantized sensor outputs over a Rayleigh fading channel. The simulation studies show the success of the MAE in the cases of both error-free fusion and where the effect of the wireless channel has been incorporated. As expected, the performance improves as the level of quantization increases and with six-level quantization approaches the performance of non-quantized data transmission.Article Citation - WoS: 22Citation - Scopus: 27Modelling Impulsive Noise in Indoor Powerline Communication Systems(Springer Verlag, 2020) Karakuş, Oktay; Kuruoğlu, Ercan E.; Altınkaya, Mustafa AzizPowerline communication (PLC) is an emerging technology that has an important role in smart grid systems. Due to making use of existing transmission lines for communication purposes, PLC systems are subject to various noise effects. Among those, the most challenging one is the impulsive noise compared to the background and narrowband noise. In this paper, we present a comparative study on modelling the impulsive noise amplitude in indoor PLC systems by utilising several impulsive distributions. In particular, as candidate distributions, we use the symmetric alpha-Stable (S alpha S), generalised Gaussian, Bernoulli Gaussian and Student's t distribution families as well as the Middleton Class A distribution, which dominates the literature as the impulsive noise model for PLC systems. Real indoor PLC system noise measurements are investigated for the simulation studies, which show that the S alpha S distribution achieves the best modelling success when compared to the other families in terms of the statistical error criteria, especially for the tail characteristics of the measured data sets.Article Citation - WoS: 103Citation - Scopus: 122One-Day Ahead Wind Speed/Power Prediction Based on Polynomial Autoregressive Model(Institution of Engineering and Technology, 2017) Karakuş, Oktay; Kuruoğlu, Ercan Engin; Altınkaya, Mustafa AzizWind has been one of the popular renewable energy generation methods in the last decades. Foreknowledge of power to be generated from wind is crucial especially for planning and storing the power. It is evident in various experimental data that wind speed time series has non-linear characteristics. It has been reported in the literature that nonlinear prediction methods such as artificial neural network (ANN) and adaptive neuro fuzzy inference system (ANFIS) perform better than linear autoregressive (AR) and AR moving average models. Polynomial AR (PAR) models, despite being non-linear, are simpler to implement when compared with other non-linear AR models due to their linear-in-the-parameters property. In this study, a PAR model is used for one-day ahead wind speed prediction by using the past hourly average wind speed measurements of Ceşme and Bandon and performance comparison studies between PAR and ANN-ANFIS models are performed. In addition, wind power data which was published for Global Energy Forecasting Competition 2012 has been used to make power predictions. Despite having lower number of model parameters, PAR models outperform all other models for both of the locations in speed predictions as well as in power predictions when the prediction horizon is longer than 12 h.Article Citation - WoS: 68Citation - Scopus: 74A Novel Acoustic Indoor Localization System Employing Cdma(Elsevier Ltd., 2012) Sertatıl, Cem; Altınkaya, Mustafa Aziz; Raoof, KosaiNowadays outdoor location systems have been used extensively in all fields of human life from military applications to daily life. However, these systems cannot operate in indoor applications. Hence, this paper considers a novel indoor location system that aims to locate an object within an accuracy of about 2 cm using ordinary and inexpensive off-the-shelf devices and that was designed and tested in an office room to evaluate its performance. In order to compute the distance between the transducers (speakers) and object to be localized (microphone), time-of-arrival measurements of acoustic signals consisting of Binary Phase Shift Keying modulated Gold sequences are performed. This DS-CDMA scheme assures accurate distance measurements and provides immunity to noise and interference. Two methods have been proposed for location estimation. The first method takes the average of four location estimates obtained by trilateration technique. In the second method, only a single robust position estimate is obtained using three distances while the least reliable fourth distance measurement is not taken into account. The system's performance is evaluated at positions from two height levels using system parameters determined by preliminary experiments. The precision distributions in the work area and the precision versus accuracy plots depict the system performance. The proposed system provides location estimates of better than 2 cm accuracy with 99% precision.Article Citation - WoS: 1Citation - Scopus: 1Benefits of Averaging Lateration Estimates Obtained Using Overlapped Subgroups of Sensor Data(Elsevier Ltd., 2013) Altınkaya, Mustafa AzizIn this paper, we suggest averaging lateration estimates obtained using overlapped subgroups of distance measurements as opposed to obtaining a single lateration estimate from all of the measurements directly if a redundant number of measurements are available. Least squares based closed form equations are used in the lateration. In the case of Gaussian measurement noise the performances are similar in general and for some subgroup sizes marginal gains are attained. Averaging laterations method becomes especially beneficial if the lateration estimates are classified as useful or not in the presence of outlier measurements whose distributions are modeled by a mixture of Gaussians (MOG) pdf. A new modified trimmed mean robust averager helps to regain the performance loss caused by the outliers. If the measurement noise is Gaussian, large subgroup sizes are preferable. On the contrary, in robust averaging small subgroup sizes are more effective for eliminating measurements highly contaminated with MOG noise. The effect of high-variance noise was almost totally eliminated when robust averaging of estimates is applied to QR decomposition based location estimator. The performance of this estimator is just 1 cm worse in root mean square error compared to the Cramér–Rao lower bound (CRLB) on the variance both for Gaussian and MOG noise cases. Theoretical CRLBs in the case of MOG noise are derived both for time of arrival and time difference of arrival measurement data.Article Citation - WoS: 4Citation - Scopus: 4Phase Dependence Mitigation for Autocorrelation-Based Frequency Estimation(Elsevier Ltd., 2008) Altınkaya, Mustafa Aziz; Anarım, Emin; Sankur, BülentThe sinusoidal frequency estimation from short data records based on Toeplitz autocorrelation (AC) matrix estimates suffer from the dependence on the initial phases of the sinusoid(s). This effect becomes prominent when the impact of additive noise vanishes, that is at high signal-to-noise ratios (SNR). Based on both analytic derivation of the AC lag terms and simulation experiments we show that data windowing can mitigate the limitations caused by the phase dependence. Thus with proper windowing, the variance of the frequency estimate is no more eclipsed by phase dependence, but it continues to decrease linearly with increasing SNR. The study covers both the cases of a single sinusoid and two sinusoids closely spaced in the frequency with the Pisarenko frequency estimator, MUSIC and principal component autoregressive frequency estimators. The trade-offs between the spectral broadening and the achieved minimum variance level due to the data window are analyzed in detail.