Electrical - Electronic Engineering / Elektrik - Elektronik Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/11
Browse
16 results
Search Results
Article Citation - WoS: 3Citation - Scopus: 4Liquid Metal-Controlled Dual-Band Doppler Radar for Enhanced Velocity Measurement(IEEE, 2024) Karatay, Anıl; Yaman, FatihDoppler radars, which are critical instruments for velocity measurement, may need to be reconfigured to adapt to different environmental conditions or for ease of use. However, conventional electrical, optical, and physical reconfiguration methods often come with several disadvantages such as deteriorated radiation pattern, reduced radiation efficiency, and high cost. Therefore, the aim of this article is to integrate microwave components that can be controlled using liquid metal (LM) displacement into a Doppler radar to adjust its main lobe direction and operating frequency to the desired values and enhance the measurement capacity of the respective radar. Through this study, multiple parameters of an operational Doppler radar have been simultaneously adjusted using LM displacement exploitation for the first time, thus avoiding the shortcomings associated with conventional reconfiguration methods. To achieve this objective, initially, a back-to-back Vivaldi antenna operating at 2.45 GHz is designed, and beam switching ability is imparted to the structure using the LM displacement method. Subsequently, various techniques are used to convert the structure into a dual-band antenna capable of simultaneous operation at 2.45 and 5.8 GHz, ensuring the desired beam switching feature at both the frequencies. In addition, a power divider capable of switching between the two operating frequencies through LM assistance is proposed, and its integration into the radar system enables the control of both main lobe direction and frequency using the proposed method.Conference Object Citation - Scopus: 2Compact Proton Accelerator in Uhf Band at Kahvelab(JACoW Publishing, 2022) Esen, S.; Adıgüzel, A.; Koçer, O.; Çağlar, A.; Çelebi, E.; Öz, S.; Özcan, V.E.; Karatay, Anıl; Yaman, Fatih; Yılmaz, Hasan ÖnderProton Test Beam at KAHVELab (Kandilli Detector, Accelerator and Instrumentation Laboratory) project aims to design and produce a radio frequency quadrupole (RFQ) operating at 800 MHz in Istanbul, Turkey using the local resources. The beamline consists of a proton source, a low energy beam transport (LEBT) line including the beam diagnostic section and the RFQ cavity itself. This RFQ is 4-vane, 1-meter-long cavity to accelerate the 20 keV beam extracted from plasma ion source to 2 MeV. Its engineering prototype is already produced and subjected to mechanical, low power RF and vacuum tests. In this study, the results of the first test production, especially the bead-pull test setup will be discussed. © 2022 Proceedings - Linear Accelerator Conference, LINAC. All rights reserved.Conference Object Citation - Scopus: 2Rf Measurements and Tuning of the Test Module of 800 Mhz Radio-Frequency Quadrupole(JACoW Publishing, 2022) Kılıçgedik, A.; Adıgüzel, A.; Esen, S.; Baran, B.; Çağlar, A.; Çelebi, E.; Özcan, V. E.; Kaya, U.; Türemen, G.; Ünel, N. G.; Yaman, FatihThe 800 MHz RFQ (radio-frequency quadrupole), developed and built at KAHVElab (Kandilli Detector, Accelerator and Instrumentation Laboratory) at Bogazici University in Istanbul, Turkey, has been designed to provide protons that have an energy of 2 MeV within only 1 m length. The RFQ consists of two modules and the test module of RFQ was constructed. The algorithm developed by CERN, based on the measurements generated by the tuner settings estimated through the response matrix [1, 2, 3], has been optimized for a single module and 16 tuners. The desired field consistent with the simulation was obtained by bead-pull measurements. In this study, we present low-power rf measurements and field tuning of the test module. © 2022 Proceedings - Linear Accelerator Conference, LINAC. All rights reserved.Conference Object Dalgacık gürültü giderme yöntemiyle mikrodalga bileşen karakterizasyonunun iyileştirilmesi(IEEE, 2023) Karatay, Anıl; Olcay, Bilal Orkan; Yaman, FatihIn this study, an efficient approach is presented to improve the characterization of various microwave components commonly used in communication and radar applications, such as antennas and power dividers. The components were initially simulated and then fabricated using the Computer Simulation Technology (CST) software. Vector Network Analyzer (VNA) measurements of the fabricated components were performed using a low-cost but noisy coaxial cable, and the measurement results were processed using a wavelet-based noise reduction method. For comparison purposes, the Haar and Daubechies-4 (DB4) wavelet functions were applied separately, and the results were examined. It was observed that the correlation and root mean square error between the ideal and measurement results improved in a positive direction with the noise reduction application. This approach provides significant cost and labor advantages, particularly when expensive elements such as gold and silver are used in coaxial cables that are physically free from noise. The experimental and numerical results show good agreement between the ideal simulation results and the filtered measurement results.Article Citation - WoS: 2Citation - Scopus: 2A Non-Resonant Approach for Dielectric Constant Reconstructions Via Newton Iterations(Elsevier, 2023) Özkal, Ceren; Yaman, FatihIn this study, a Newton–Raphson-based iterative method has been proposed to obtain dielectric constants accurately from measurements. The originalities of the approach lie in its applicability at non-resonant frequencies, which brings a significant experimental simplicity by avoiding critical coupling, expansion of available frequencies in different bands with the same cost-efficient low-Q (?60) cavity. The direct problem involves either measuring power values inside a cavity (14.6 × 5 × 20.6) cm via a spectrum analyzer or simulating the complete setup via CST-MWS software at one of the non-resonant modes, 1.5 GHz. The solution to the inverse problem provides fastly converging results with an error rate of 1% for the unknown permittivities. The experiments were carried out using five different liquid samples even though the proposed technique does not have a limitation on solid materials. Applicability and the effectiveness of the introduced method is illustrated in detail and comparisons with the perturbation method is provided. © 2023 Elsevier GmbHArticle Citation - WoS: 3Citation - Scopus: 4Cost-Effective Experiments With Additively Manufactured Waveguide and Cavities in the S-Band(Iop Publishing Ltd, 2023) Karatay, Anıl; Yilmaz, Hasan Önder; Özkal, Ceren; Yaman, FatihThis study demonstrates the applicability of additively manufactured components that are metalized with conductive tape for two different microwave experiments. We focus on dielectric measurements and prototyping elliptical accelerator cavities at a low power regime for 2.45 GHz. To illustrate the accuracy of our results for the commonly used solid/liquid materials in engineering and to compare the fundamental accelerator cavity parameters with previous research rectangular and elliptic 3D-printed cavities coated with aluminum-type tape were employed in the experiments. Results reported for the complex-valued permittivities and specific design parameters for the cavity prototype are consistent with the literature. Various approaches to obtain the conductivity value of the tape and the effect of the roughness/thickness of the coating on the reflection parameter are discussed in detail. We confirm the effectiveness of the proposed approach, which reduces costs and provides a high degree of accuracy for investigated applications.Article Citation - WoS: 3Citation - Scopus: 3Reconstructions of Effective Parameters for a Metamaterial Antenna Via 3d-Printed Components(Taylor & Francis, 2022) Yılmaz, Hasan Önder; Yaman, FatihThis study presents the reconstruction of effective medium parameters for a double negative metamaterial slab from the knowledge of the measured/simulated S-matrix. The structure initially has been designed to embed into a patch antenna for a radar application. To observe the medium characteristics, we locate the slab in a rectangular waveguide for various orientations. The waveguide-based retrieval method is applied to find parameters regarding the biaxial anisotropic medium. Fundamental mode is used for the excitation. Additive printing technology is employed to manufacture a rectangular waveguide and its adapters for the experiments. The metallization is achieved by coating the printed structures with conductive thin layers. Experimental setups for each orientation are simulated as well. We illustrate good agreements between simulation and measurements under the fabrication tolerances. The feasibility and applicability of the additive printing technology for the investigations of the metamaterial anisotropic/bianisotropic nature is reported.Article Citation - WoS: 2Citation - Scopus: 2Electromagnetic Effects of Equatorially Misaligned Rf Cavities(IOP Publishing, 2021) Karatay, Anıl; Yaman, FatihOne of the most challenging problems in modern particle accelerator systems is the manufacture of RF cavities within the desired tolerance limits. In this study experimental and computational investigations to quantify the effects of transversal half-cell misalignments on the fundamental accelerator cavity parameters and beam dynamics are presented. Equivalent circuit components of an equatorially misaligned single-cell aluminum elliptical cavity are obtained from the measured data and are employed to calculate longitudinal impedance and modal wake function. Critical coupling and bead-pull measurements are performed at the TM010-like mode frequency, 2.45 GHz for the quality factor and shunt impedance of the high-beta cavity. We report equivalent circuit analysis for higher-order modes and variations of the equivalent circuit components with respect to considered misalignment errors for the MICE experiment's muon cooling cavity. It is shown that using the equivalent circuit model decreases the computational load significantly for the wake field simulations of resonator cavities. Good agreement between simulations and measurements in terms of accelerating cavity parameters and impedances is illustrated.Article Citation - WoS: 7Citation - Scopus: 8Implementation and Experimental Verifications of Microstrip Antennas for Angular Scanning of a Doppler Radar(Elsevier, 2019) Karatay, Anıl; Orcan, Durmuş; Özkal, Ceren; Yaman, FatihThe aim of this study is to improve operational capabilities and range of the MIT-Coffee Can Doppler radar via aperture coupled Vivaldi type transmitter antenna, patch array receiver antenna, and an unequal power divider. Accordingly, a mechanical angular scanning feature for tracking multi-targets and the system integration of lightweight microstrip structures are realized for the radar. A narrow beamwidth in the receiver and a well impedance matching on the overall system to reduce return losses are achieved for the considered application. Good agreements between simulations and measurements for the fabricated antennas/divider and a successful integration of the antennas to the existing system for finding a moving target angular location is reported. It is shown that through wall identification and target velocity at scanned regions can be obtained with the proposed hardware configuration. Simulation results of antenna parameters for various number of array elements are listed which could be a useful tool for different engineering applications. (C) 2019 Elsevier GmbH. All rights reserved.Article Citation - WoS: 2Citation - Scopus: 2Quantification of Resistive Wall Instability for Particle Accelerator Machines(Türkiye Klinikleri Journal of Medical Sciences, 2019) Yaman, FatihThe aim of this study is to quantify longitudinal resistive wall impedances, corresponding wake functions, and wake potentials for different accelerator machines of interest. Accurate calculations of wake potentials by particle-in-cell codes are extremely difficult for the investigated parameters; therefore, we use an analytical approach and consider large domains with fine discretization for the required numerical integrations. The semianalytical wake potential computations are benchmarked against numerical general purpose 2D/3D Maxwell solver software codes and a different analytical approach for a certain set of parameters. We report examples to illustrate limitations of wake potential estimations from coupling impedances, and computations for the machines using realistic beam parameters and machine conditions. A numerical example where the aim is to find the wake potential of the machine from the 5% noisy impedance data is given.