Electrical - Electronic Engineering / Elektrik - Elektronik Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/11
Browse
18 results
Search Results
Article Citation - WoS: 1Citation - Scopus: 1Experimental Demonstration of a Transient Grating Controlled All-Optical Switch(IOP Publishing, 2023) Akın, Osman; Dinleyici, Mehmet Salih; Dinleyici, Mehmet Salih; 03.05. Department of Electrical and Electronics Engineering; 03. Faculty of Engineering; 01. Izmir Institute of TechnologyWe demonstrate an on-fiber all-optical switching device based on a transient grating formed by the interference of control laser pulses in a Kerr-type nonlinear material placed in the evanescent region of the fiber. The device can operate in two distinctive modes. First, switching/coupling among the fiber modes using bulk index modulation was investigated and an efficiency of about %0.55 @852 nm was measured. Second, by exploiting Four Wave Mixing (FWM), an all-optical switching that transfers power among light signals with wavelengths of λ 1 = 440 nm and λ 2 = 663 nm was achieved by quasi-phase-matching and fRequency matching in a nonlinear thin polymeric film. The results prove that the introduced switching structure may have the potential to be used in integrated photonic applications such as intensity modulators or controllable couplers.Article Citation - WoS: 5Citation - Scopus: 5Nanoscale Curved Dielectric Film Characterization Beyond Diffraction Limits Using Spatially Structured Illumination(Academic Press, 2020) Ataç, Enes; Dinleyici, Mehmet Salih; Dinleyici, Mehmet Salih; 03.05. Department of Electrical and Electronics Engineering; 03. Faculty of Engineering; 01. Izmir Institute of TechnologyOptical fiber based sensor systems often utilize thin dielectric films coated on non-planar surfaces are needed to be inspected for quality assurance. However, non-destructive optical characterization of these films is not a simple method especially on curved large surfaces. In this study, we propose a real time procedure to estimate the optical properties of sub-wavelength transparent dielectric films coated on optical fibers. The paper includes developing a mathematical model and its experimental verification. The near field phase diffraction method is combined with the structured light illumination that is spatial modes of optical fibers to estimate the thickness of the phase object beyond the classical diffraction limits. Numerical simulations and experimental results show that the film thickness can safely be characterized up to one tenth of wavelength of interest via selective spatial field distribution determined according to the morphology of the thin film. The outcomes have good agreements with destructive Scanning Electron Microscope (SEM) measurements. © 2020 Elsevier Inc.Conference Object All-Optical Switching Based on Grating Written Photorefractive Slab/Fiber Waveguide Coupler(Institute of Electrical and Electronics Engineers Inc., 2002) Dinleyici, Mehmet Salih; Dinleyici, Mehmet Salih; 03.05. Department of Electrical and Electronics Engineering; 03. Faculty of Engineering; 01. Izmir Institute of TechnologySince all optical switching is a key element for all kinds of optical networks, great amount of works have been dedicated either for material researches or various waveguide structures. Generally speaking the switching time of devices based on photorefractive effect are rather slow for today's high capacity optical fiber networks. In the field of waveguide architecture various geometries have been proposed and investigated for grating assisted or guided optical coupling for the purpose of designing all-optical switch, adddrop multiplexers, filters etc.Conference Object Citation - Scopus: 13-D Switching Fabric Node Design(ACTA Press, 2004) Dinleyici, Mehmet Salih; Dinleyici, Mehmet Salih; Akın, Osman; 03.05. Department of Electrical and Electronics Engineering; 03. Faculty of Engineering; 01. Izmir Institute of TechnologyIn this work we investigate an all-optical switching node that can be controlled by means of a transient grating, which is formed by interference of two Gaussian beams. This design considers 3-D architecture of switching fabrics.. real profile of Gaussian beams and fast switching time requirements. Four Wave Mixing (FWM) technique is applied in the evanescent field region of waveguide, showing chi((3)) nonlinearity. The formed grating is analysed by standart methods to obtain reflection coefficient and then coupling coefficient for power exchange between waveguides.Article Citation - WoS: 2Citation - Scopus: 2Investigating the Experimental Limits of the Brewster’s Angle Method(Türkiye Klinikleri Journal of Medical Sciences, 2018) Sümer, Can; Kuştepeli, Alp; Kuştepeli, Alp; Dinleyici, Mehmet Salih; 03.05. Department of Electrical and Electronics Engineering; 03. Faculty of Engineering; 01. Izmir Institute of TechnologyWe present the method, analysis, and experimental results of the Brewster’s angle method commonly used for determining the refractive indices of optical films. We show the significance of the intersection of reflectance curves, in that the necessity for substrate refractive index and film layer thickness knowledge are both eliminated. We present the conditions for the existence of the second intersection of reflectance curves and introduce a method for determining the refractive index of the substrate layer by using the angular information alone. Analytical results reveal impressive practical sensitivity and accuracy limits for the method, where the experimental results also support the theoretical analysis.Article Citation - WoS: 7Citation - Scopus: 7Demonstration of Pulse Controlled All-Optical Switch/Modulator(The Optical Society, 2014) Akın, Osman; Dinleyici, Mehmet Salih; Dinleyici, Mehmet Salih; 03.05. Department of Electrical and Electronics Engineering; 03. Faculty of Engineering; 01. Izmir Institute of TechnologyAn all-optical pulse controlled switch/modulator based on evanescent coupling between a polymer slab waveguide and a single mode fiber is demonstrated. Very fast all-optical modulation/switching is achieved via Kerr effect of the nonlinear polymer placed in the evanescent region of the optical fiber. Local refractive index perturbation (δn = -1.45612 × 10 -5) on the thin film leads to 0.374 nW power modulation at the fiber output, which results in a switching efficiency of ≈1.5%.Article Citation - WoS: 5Citation - Scopus: 7A Practical Approach for Optical Characterization of a Film Coated on the Optical Fiber(Academic Press Inc., 2017) Ekici, Çağın; Dinleyici, Mehmet Salih; Dinleyici, Mehmet Salih; Ekici, Çağın; 01. Izmir Institute of Technology; 03.05. Department of Electrical and Electronics Engineering; 03. Faculty of EngineeringPhase Diffraction (PD) Phase Diffraction. which is a result of the interaction of light waves with a transparent object, is exploited to characterize precisely optical properties of dielectric films coated on the optical fiber without harming any feature of the sample. Typical fiber sensor applications require films coated on the side surface of the optical fiber and optical properties of that curved films are crucial for design purposes. In this study, three Polyvinyl Alcohol (PVA) films are prepared, their thicknesses are estimated based on the phase diffraction method by fitting experimental results with a mathematical model within 2.3% error. The outcomes of this practical method show good agreement with findings of the destructive Scanning Electron Microscopy (SEM) measurements. The method has the potential to allow real time monitoring abrupt changes of surrounding medium's properties and to examine coating quality (i.e. thickness uniformity) of the film.Article Citation - WoS: 8Citation - Scopus: 10Design of Dual-Mode Dual-Band Photonic Crystal Bandpass Filters for Terahertz Communication Applications(John Wiley and Sons Inc., 2015) Karakılınç, Özgür Önder; Dinleyici, Mehmet Salih; 03.05. Department of Electrical and Electronics Engineering; 03. Faculty of Engineering; 01. Izmir Institute of TechnologyIn this study, Photonic Crystal (PhC) dual-mode dual-band bandpass filter is designed and its transmission characteristics are investigated for various configurations. PhC resonator structure is formed by a point defect microcavity that is equipped with one large and three smaller auxiliary perturbation rods. Degenerate modes at each band may also be excited by changing the structure properties of the perturbation. Plane wave expansion method and Finite Difference Time-Domain method are used to analyze the device characteristics. Proposed dual-band dual-mode PhC filter structure can effectively be used for terahertz communication applications.Article A Fiber-Integrated Optical Component Fabricated Via Photopolymerization: Mode-Selective Grating Coupler(Elsevier Ltd., 2013) Sümer, Can; Dinleyici, Mehmet Salih; Dinleyici, Mehmet Salih; 03.05. Department of Electrical and Electronics Engineering; 03. Faculty of Engineering; 01. Izmir Institute of TechnologyWe demonstrate a mode-selective directional coupler based on a grating structure, which is fabricated by laser direct-writing on a photopolymer thin film. The device is implemented on the flat planar surface of the D-Fiber, enabling fiber integration, where an Acrylamide/Polyvinyl Alcohol based photopolymer material is used in the fabrication of the device. While the refractive index modulation properties of the polymer material are well known, surface relief and corrugation properties due to photopolymerization are investigated in this study. Theoretical model of the device is presented together with the optimization and simulation results of the final device; experimental results have been found to be in good agreement with simulations.Article Citation - WoS: 1Citation - Scopus: 1Interference Grating Structures in Photonic Crystal Circuits(Springer Verlag, 2011) Karakılınç, Özgür Önder; Dinleyici, Mehmet Salih; 03.05. Department of Electrical and Electronics Engineering; 03. Faculty of Engineering; 01. Izmir Institute of TechnologyPhotonic Crystal Circuits have been widely investigated for various optoelectronics device applications. And the gratings in photonics devices are indispensable tool, which is very common for light manipulation. In this study, an interference grating structure formed by Gaussian beam interferences in photonic crystal waveguide such that having Kerr type nonlinearity is proposed and its transmission characteristics are investigated. Finite-Difference Time-Domain method is used to analyze the device characteristics. According to simulation results, the interference grating has shown special transmission characteristics that can bring tunability for photonic crystal devices. This can be an effective method for controlling optical signals in the photonic crystal for all optical switching/routing applications as a part of add/drop multiplexing.