Electrical - Electronic Engineering / Elektrik - Elektronik Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/11
Browse
4 results
Search Results
Conference Object Citation - Scopus: 2Compact Proton Accelerator in Uhf Band at Kahvelab(JACoW Publishing, 2022) Esen, S.; Adıgüzel, A.; Koçer, O.; Çağlar, A.; Çelebi, E.; Öz, S.; Özcan, V.E.; Karatay, Anıl; Yaman, Fatih; Yılmaz, Hasan ÖnderProton Test Beam at KAHVELab (Kandilli Detector, Accelerator and Instrumentation Laboratory) project aims to design and produce a radio frequency quadrupole (RFQ) operating at 800 MHz in Istanbul, Turkey using the local resources. The beamline consists of a proton source, a low energy beam transport (LEBT) line including the beam diagnostic section and the RFQ cavity itself. This RFQ is 4-vane, 1-meter-long cavity to accelerate the 20 keV beam extracted from plasma ion source to 2 MeV. Its engineering prototype is already produced and subjected to mechanical, low power RF and vacuum tests. In this study, the results of the first test production, especially the bead-pull test setup will be discussed. © 2022 Proceedings - Linear Accelerator Conference, LINAC. All rights reserved.Article Citation - WoS: 4Citation - Scopus: 4A Symmetrical Self-Diplexing Microstrip Antenna With Eight-Shaped Defects(Taylor & Francis, 2022) Karatay, AnılThis article aims to demonstrate the simulation and measurement results of a two-port and symmetrical microstrip antenna operating at 6.6 and 7 GHz frequencies. The essential advantages of the antenna in terms of numerical electromagnetism are that the geometry has a small electrical length at both frequencies, does not use a structure that requires extra computational load such as substrate integrated waveguide, and is symmetrical, thus reducing the mesh requirement by half. The proposed antenna was manufactured with the chemical etching method and the measurement results were presented. In addition, varying operating frequencies are shown with the aid of liquid metal to experimentally demonstrate the independent redesign/reconfigurability feature of the antenna. To further reduce the fabrication cost, the manufacturing process of the proposed antenna with the help of a 3D printer is explained, and the performance parameters are compared. Good agreement between simulations and measurements has been reported.Article Citation - WoS: 7Citation - Scopus: 8Implementation and Experimental Verifications of Microstrip Antennas for Angular Scanning of a Doppler Radar(Elsevier, 2019) Karatay, Anıl; Orcan, Durmuş; Özkal, Ceren; Yaman, FatihThe aim of this study is to improve operational capabilities and range of the MIT-Coffee Can Doppler radar via aperture coupled Vivaldi type transmitter antenna, patch array receiver antenna, and an unequal power divider. Accordingly, a mechanical angular scanning feature for tracking multi-targets and the system integration of lightweight microstrip structures are realized for the radar. A narrow beamwidth in the receiver and a well impedance matching on the overall system to reduce return losses are achieved for the considered application. Good agreements between simulations and measurements for the fabricated antennas/divider and a successful integration of the antennas to the existing system for finding a moving target angular location is reported. It is shown that through wall identification and target velocity at scanned regions can be obtained with the proposed hardware configuration. Simulation results of antenna parameters for various number of array elements are listed which could be a useful tool for different engineering applications. (C) 2019 Elsevier GmbH. All rights reserved.Article Citation - WoS: 4Citation - Scopus: 4Electromagnetic Simulations of Mechanical Imperfections for Accelerator Cavities(Institute of Electrical and Electronics Engineers Inc., 2019) Karatay, Anıl; Yaman, FatihEffects of surface roughness and transversal cell misalignments on the performance of elliptical accelerator cavities are studied in this article. A high-beta, 9-cell elliptical cavity, whose pi-mode resonates at 3.9 GHz, is designed to investigate imperfections. The considered frequency is chosen to observe variations of fundamental accelerating cavity parameters, wake potentials, and wake impedances more clearly by using relatively small structures. Moreover, 3-cell elliptical cavities having pi-mode at 2 and 3.9 GHz are designed to confirm the 9-cell cavity results. The undesired effects caused by the considered mechanical imperfections are simulated for an ultra-relativistic bunch in the parameter scope of a realistic scenario. In particular, Huray's snowball model, which is a scattering-based surface roughness approach developed for microstrip lines, is employed to determine the effects of the surface roughness on the accelerator cavities. Surface roughness due to the fabrication process is expressed as a surface impedance, and the required equivalence between the surface roughness and surface impedance concept is achieved. Significant computational efficiency is observed by using the surface impedance concept with Huray's snowball model in the simulations. Experimental verification of certain parameters is included for an elliptical cavity having high cell-to-cell coupling at 3.9 GHz.