Chemistry / Kimya
Permanent URI for this collectionhttps://hdl.handle.net/11147/4072
Browse
483 results
Search Results
Article Citation - WoS: 2Citation - Scopus: 2A Novel Approach Utilizing Rapid Thin-Film Microextraction Method for Salivary Metabolomics Studies in Lung Cancer Diagnosis(Elsevier, 2024) Pelit, Fusun; Erbas, Ilknur; Ozupek, Nazli Mert; Gul, Merve; Sakrak, Esra; Ocakoglu, Kasim; Goksel, Ozlem; Özdemir, DurmuşThis study investigated the potential of targeted salivary metabolomics as a convenient diagnostic tool for lung cancer (LC), utilizing a rapid TFME-based method. It specifically examines TFME blades modified with SiO2 nanoparticles, which were produced using a custom-made coating system. Validation of the metabolite biomarker analysis was performed by these blades using liquid chromatography-tandem mass spectroscopy (LCMS/MS). The extraction efficiencies of SiO2 nanoparticle/polyacrylonitrile (PAN) composite-coated blades were compared for 18 metabolites. Response surface methodology (RSM) was used to optimize the analysis conditions. Linear calibration plots were obtained for all metabolites at concentrations between 0.025 to 4.0 mu g/mL in the presence of internal standard, with correlation coefficients (R-2) ranging from 0.9975 to 0.9841. The limit of detection (LOD) and limit of quantitation (LOQ) were in the range of 0.014 to 0.97 mu g mL(-1) and 0.046 to 3.20 mu gmL(-1), respectively. The %RSD values for all analytes were within the acceptable range (less than 20 %) for the proposed method. The method was applied to the saliva samples of 40 patients with LC and 38 healthy controls. The efficacy of metabolites for LC diagnosis was determined by in silico methods and the results reveal that phenylalanine and purine metabolism metabolites (e.g., hypoxanthine) are of great importance for LC diagnosis. Furthermore, potentially significant biomarker analysis results from the ROC curve data reveal that proline, hypoxanthine, and phenylalanine were identified as potential biomarkers for LC diagnosis.Book Part Citation - Scopus: 3Advances and Future Perspective of Graphene Field Effect Transistors (gfets) for Medical Diagnostics and Point-Of Tools(World Scientific Publishing, 2022) İnanç, Dilce; Mutlu, Mustafa Umut; Karabacak, Soner; Yıldız, Ümit HakanRecently, major focus has been centered to enhance the capability of graphenebased devices and to facilitate utilization of graphene for biological applications by lowering its toxicity. In this chapter, from synthesis to applications, many of the conspicuous characteristics of graphene have been elaborately reviewed. We primarily focused on graphene-based field effect transistor (FET) for medical diagnostics and point-of-care applications. The device configurations and their application potential as well as sensing capability of various graphene FETs (GFETs) have been discussed. Here, we have also presented several aspects and advantages of GFETs in medical applications while discussing their pros and cons in commercialization. We address the advances and challenges for GFET-based sensing platforms for the medical applications and elaborate the combination strategy of GFETs with the existing commercial systems. © 2023 by World Scientific Publishing Co. Pte. Ltd.Article Citation - WoS: 3Citation - Scopus: 41,2-Diboranes With Strong Donor Substitutes: Synthesis, Ovicidal and Larvicidal Effect on Important Vector Species(Elsevier, 2024) Bursali, Fatma; Sahin, Yueksel; Aygun, Muhittin; Sevincek, Resul; Biyik, H. Halil; Özgener, Hüseyin; Gurbuz, BurcinNovel control products are needed in the control of important insects like mosquitoes which are developing resistance to insecticides and larvicides currently in the market. Boron compounds have been demonstrated to exhibit antibacterial and anticancer effects. 1,2-diboranes with a long history and importance in boron chemistry have been described. These compounds are synthesized from reactions of 1,2-dichlordiborane derivatives with lidium amides (ArNHLi/Et2NLi, etc.). In addition to the three previously synthesized diborane compounds, five novel 1,2-diborane compounds were synthesized in good yield using the same method for the first time. The structures of the novel derivatives were characterized by nuclear magnetic resonance spectroscopy, and the molecular structure of one of them (2a) was also demonstrated using single crystal X-ray diffraction. In this preliminary study, the ovicidal and larvicidal effects of new 1,2-diamino-1,2-diborane derivatives against Aedes aegypti and Aedes albopictus eggs and larvae were investigated for the first time. Of these, 2a and 2e showed the highest ovicidal activity against both species, while 7, 4 and 2d showed particularly high larvicidal activity. Some 1,2-diborane derivatives were found to be significantly toxic, with LC50 values ranging from 14,930 to 27,975 mu g/mL. Some derivatives (6, 2a, 2c) were less effective against mosquito larvae. 1,2-Diborane derivatives have high ovicidal and larvicidal effects on mosquitoes and are therefore potential candidates for the development of new larvicides. Further studies are needed to evaluate its mode of action and safety. Understanding their mode of action against mosquito development is crucial to optimizing their use and reducing the potential development of resistance. Their potential effects on other mosquito species and non -target organisms need to be investigated.Article Citation - Scopus: 3Development of Chrono-Spectral Gold Nanoparticle Growth Based Plasmonic Biosensor Platform(Elsevier, 2024) Sözmen, Alper Baran; Elveren, Beste; Erdoğan, Duygu; Mezgil, Bahadır; Baştanlar, Yalın; Yıldız, Ümit Hakan; Arslan Yıldız, AhuPlasmonic sensor platforms are designed for rapid, label-free, and real-time detection and they excel as the next generation biosensors. However, current methods such as Surface Plasmon Resonance require expertise and well-equipped laboratory facilities. Simpler methods such as Localized Surface Plasmon Resonance (LSPR) overcome those limitations, though they lack sensitivity. Hence, sensitivity enhancement plays a crucial role in the future of plasmonic sensor platforms. Herein, a refractive index (RI) sensitivity enhancement methodology is reported utilizing growth of gold nanoparticles (GNPs) on solid support and it is backed up with artificial neural network (ANN) analysis. Sensor platform fabrication was initiated with GNP immobilization onto solid support; immobilized GNPs were then used as seeds for chrono-spectral growth, which was carried out using NH2OH at varied incubation times. The response to RI change of the platform was investigated with varied concentrations of sucrose and ethanol. The detection of bacteria E.coli BL21 was carried out for validation as a model microorganism and results showed that detection was possible at 102 CFU/ml. The data acquired by spectrophotometric measurements were analyzed by ANN and bacteria classification with percentage error rates near 0% was achieved. The proposed LSPR-based, label-free sensor application proved that the developed methodology promises utile sensitivity enhancement potential for similar sensor platforms. © 2024 The Author(s)Article Free-Standing Three-Dimensional Graphene Scaffolds for Protease Functional Assay(Elsevier Science Sa, 2024) Ng, Zhi Kai; Yan, Evelias; Goyal, Garima; Gudlur, Sushanth; Kanagavel, Deepankumar; Yildiz, Umit Hakan; Teo, Edwin Hang TongThree-dimensional graphene scaffolds (3d-GS) of high porosity possessing good fluorescence quenching properties are potential candidates for the development of optical biosensors. Herein, we demonstrate the feasibility of utilising intact and free-standing 3d-GS for sensitive detection of proteases, a class of disease diagnosis bio-markers of significant interest. Recombinant OmpT was employed as a model protease for validating the pro-posed methodology. A short (15-residue) peptide sequence encoding a specific recognition site for OmpT was end-labelled with a fluorescent dye (5-FAM) whose fluorescence is quenched when the peptide is anchored to 3d-GS. However, in the presence of OmpT, the peptide is cleaved and released from 3d-GS, resulting in a sig-nificant recovery in fluorescence. The functional assay described herein involves a single step fabrication process of anchoring the peptide to 3d-GS. The integrity of the 3d-GS is hypothesised to overcome the concern of dynamic requenching associated with the typical homogeneous assays based on graphene, yielding a limit of detection (LOD) of similar to 140 nM, which is over an order higher than homogeneous assays performed using the same composition of graphene in powdered form. To the best of our knowledge, this is the first report on utilising free-standing 3d-GS for facile assaying of proteases.Article Citation - WoS: 6Citation - Scopus: 6A Novel 2-Aminophenalenone Fluorescent Probe Designed for Monitoring H2o2 for in Vitro and in Vivo Bioimaging(Elsevier, 2024) Saygılı, Ecem; Ersöz Gülseven, Esra; Kıbrıs, Erman; Çakan Akdoğan, Gülçin; Üçüncü, MuhammedA significant compound in living organisms, hydrogen peroxide (H2O2) plays a dual role as a signalling molecule in cellular communication and as a pivotal biomarker in assessing disease and oxidative stress. Thus, the detection of abnormal changes in H2O2 levels is essential to understanding its function and involvement in biological systems. The growing demand to meet the specific needs for applications, particularly in biological systems, has sharpened focus on highly sensitive, highly selective molecular sensors and, in turn, heightened interest in these diagnostic tools with innovative designs. In our study, 2-aminophenalenone (2-AP) was used for the first time as a fluorophore in a fluorescent probe. The 2-APB molecule obtained from the reaction of 2-AP with 4-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl) benzyl chloroformate exhibited a highly selective and sensitive (i.e. 62 nM) detection profile for H2O2 compared with the other reactive oxygen species, anions, and metal cations. Moreover, offering naked-eye detection in aqueous solutions, 2-APB demonstrated excellent sensing performance, detection and real-time monitoring in relation to exogenous H2O2 in cells and endogenous H2O2 in zebrafish embryos. © 2024 Elsevier B.V.Article Citation - WoS: 1Citation - Scopus: 1The Soft Nanodots as Fluorescent Probes for Cell Imaging: Analysis of Cell and Spheroid Penetration Behavior of Single Chain Polymer Dots(Wiley, 2024) Yücel, Müge; Onbaş, Rabia; Arslan Yıldız, Ahu; Yıldız, Ümit HakanThis study describes the formation, size control, and penetration behavior of polymer nanodots (Pdots) consisting of single or few chain polythiophene-based conjugated polyelectrolytes (CPEs) via nanophase separation between good solvent and poor solvent of CPE. Though the chain singularity may be associated with dilution nanophase separation suggests that molecules of a good solvent create a thermodynamically driven solvation layer surrounding the CPEs and thereby separating the single chains even in their poor solvents. This statement is therefore corroborated with emission intensity/lifetime, particle size, and scattering intensity of polyelectrolyte in good and poor solvents. Regarding the augmented features, Pdots are implemented into cell imaging studies to understand the nuclear penetration and to differentiate the invasive characteristics of breast cancer cells. The python based red, green, blue (RGB) color analysis depicts that Pdots have more nuclear penetration ability in triple negative breast cancer cells due to the different nuclear morphology in shape and composition and Pdots have penetrated cell membrane as well as extracellular matrix in spheroid models. The current Pdot protocol and its utilization in cancer cell imaging are holding great promise for gene/drug delivery to target cancer cells by explicitly achieving the very first priority of nuclear intake. The penetration capability of cationic soft nanodots in to tumor models of breast cancer is demonstrated. The image analysis based on fluorescence intensity variation reveals the characteristics of translocation of nanodots in dense mediums such as tumor models.imageArticle Citation - WoS: 3Citation - Scopus: 3Roadmap on Multifunctional Materials for Drug Delivery(IOP Publishing, 2024) Nottelet, Benjamin; Buwalda, Sytze; van Nostrum, Cornelus F.; Zhao, Xiaofei; Deng, Chao; Zhong, Zhiyuan; Cheah, Ernest; Kehr, Nermin SedaThis Roadmap on drug delivery aims to cover some of the most recent advances in the field of materials for drug delivery systems (DDSs) and emphasizes the role that multifunctional materials play in advancing the performance of modern DDSs in the context of the most current challenges presented. The Roadmap is comprised of multiple sections, each of which introduces the status of the field, the current and future challenges faced, and a perspective of the required advances necessary for biomaterial science to tackle these challenges. It is our hope that this collective vision will contribute to the initiation of conversation and collaboration across all areas of multifunctional materials for DDSs. We stress that this article is not meant to be a fully comprehensive review but rather an up-to-date snapshot of different areas of research, with a minimal number of references that focus upon the very latest research developments.Article Citation - WoS: 13Citation - Scopus: 13Design, Fabrication, and Application of Micro-Structured Surfaces for Laser-Induced Breakdown Spectroscopic Analysis of Liquids: a Sample-Loading Target Development Studies(Elsevier, 2024) Kaplan, Dilara; Aras, Nadir; Yalcin, SerifeIn this paper, design, fabrication, and application studies of a sample loading target patterned with periodical micro-structures were presented. Two different geometrical shapes; triangular prisms and cylinders of two different feature sizes; 5-mu m, and 20-mu m, were photo-lithographically patterned on Si-wafer substrates, and dry etched to 10 mu m height. Followed by a 1-mu m thick silicon nitride film coating over micro-patterned substrates, final products were obtained after dicing into one-inch size squares, each containing 36 patterned sample loading areas. Among the three different patterns studied; a geometric design with 20-mu m diameter cylinders exhibited a more effective task in increasing the LIBS signal strength, compared to the other two patterns. The characterization of the surface morphology and the size-shape distribution of the micro-patterns were carried out through optical and scanning electron microscopic measurements. SEM images proved a more effective ablation occur-ring on triangular prism micro-structured surfaces that can be associated with an increased path length and enhanced absorption of the laser beam on the flat surfaces of triangular prism via multiple reflections. The results of structured surfaces were also compared with the ones from non-structured surfaces of 300 nm and 1000 nm thicknesses of silicon nitride-coating. The applications of micro-structured surfaces for heavy metals analysis were performed with Cr and Pb solutions via dried-droplet LIBS methodology. The enhancement factor of 4 for Pb(I) 405.8 nm, and 8 for Cr(I) 428.9 nm were observed from the 20-mu m diameter cylinder, CYL-20, surfaces compared to 300 nm thick Si3N4 surfaces, respectively. This study of micro-structuring substrate surfaces with an emphasis on the signal enhancement effect is promising in terms of improving the capacity and limitations of the dried-droplet methodology by LIBS.Article Citation - Scopus: 1A Perspective on the State-Of Functionalized 2d Materials(American Institute of Physics, 2023) Duran, Tuna; Yayak, Yankı Öncü; Aydın, Hasan; Peeters, François M.; Yağmurcukardeş, MehmetTwo-dimensional (2D) ultra-thin materials are more crucial than their bulk counterparts for the covalent functionalization of their surface owing to atomic thinness, large surface-to-volume ratio, and high reactivity of surface atoms having unoccupied orbitals. Since the surface of a 2D material is composed of atoms having unoccupied orbitals, covalent functionalization enables one to improve or precisely modify the properties of the ultra-thin materials. Chemical functionalization of 2D materials not only modifies their intrinsic properties but also makes them adapted for nanotechnology applications. Such engineered materials have been used in many different applications with their improved properties. In the present Perspective, we begin with a brief history of functionalization followed by the introduction of functionalized 2D materials. Our Perspective is composed of the following sections: the applications areas of 2D graphene and graphene oxide crystals, transition metal dichalcogenides, and in-plane anisotropic black phosphorus, all of which have been widely used in different nanotechnology applications. Finally, our Perspectives on the future directions of applications of functionalized 2D materials are given. The present Perspective sheds light on the current progress in nanotechnological applications of engineered 2D materials through surface functionalization. © 2023 Author(s).