Chemistry / Kimya
Permanent URI for this collectionhttps://hdl.handle.net/11147/4072
Browse
10 results
Search Results
Article Citation - Scopus: 1A Perspective on the State-Of Functionalized 2d Materials(American Institute of Physics, 2023) Duran, Tuna; Yayak, Yankı Öncü; Aydın, Hasan; Peeters, François M.; Yağmurcukardeş, MehmetTwo-dimensional (2D) ultra-thin materials are more crucial than their bulk counterparts for the covalent functionalization of their surface owing to atomic thinness, large surface-to-volume ratio, and high reactivity of surface atoms having unoccupied orbitals. Since the surface of a 2D material is composed of atoms having unoccupied orbitals, covalent functionalization enables one to improve or precisely modify the properties of the ultra-thin materials. Chemical functionalization of 2D materials not only modifies their intrinsic properties but also makes them adapted for nanotechnology applications. Such engineered materials have been used in many different applications with their improved properties. In the present Perspective, we begin with a brief history of functionalization followed by the introduction of functionalized 2D materials. Our Perspective is composed of the following sections: the applications areas of 2D graphene and graphene oxide crystals, transition metal dichalcogenides, and in-plane anisotropic black phosphorus, all of which have been widely used in different nanotechnology applications. Finally, our Perspectives on the future directions of applications of functionalized 2D materials are given. The present Perspective sheds light on the current progress in nanotechnological applications of engineered 2D materials through surface functionalization. © 2023 Author(s).Article Citation - WoS: 1Citation - Scopus: 1Investigation of Cytotoxic Properties of Some Isoindole-Related Compounds Bearing Silyl and Azide Groups With in Vitro and in Silico Studies(Taylor & Francis, 2023) Tan, Ayşe; Köse, Aytekin; Mete, Derya; Şanlı Mohamed, Gülşah; Kışhalı, Nurhan H.; Kara, YunusThis study aims to evaluate the synthesis of isoindole-1,3-dione analogues and their cytotoxic potential. A549 and HeLa cells exposed to 250-100-50-25 mu M doses of each derivative were incubated for 24, 48, and 72 h. The cytotoxicity of the isoindole-1,3-dione derivatives was analyzed using the cell growth inhibition assay and the cell membrane damage test. (3aR,5R,6R,7aS)-5-Azido-2-benzyl-6-hydroxyhexahydro-1H-isoindole-1,3(2H)-dione (1d), (3aR,5R,6R,7aS)-5-azido-6-((tert-butyldiphenylsilyl)oxy)-2-ethylhexahydro-1H-isoindole-1,3(2H)-dione (2a), and (3aR,5R,6R,7aS)-5-azido-6-((tert-butyldiphenylsilyl)oxy)-2-methylhexahydro-1H-isoindole-1,3(2H)-dione (2b) compounds inhibited the growth of the A549 and HeLa cells caused membrane damage and exhibited a dose-dependent cytotoxic effect on lung and cervical carcinoma cells. The effect of tert-butyldiphenylsilyl (TBDPS) groups on cytotoxicity was observed in compounds 2a and 2b, but not in the other compounds. Considering the effect of groups attached to the nitrogen atom, the best activity was exhibited in 2b molecule to which the methyl group is attached. Additionally, the interactions of compounds (3aR,5R,6R,7aS)-5-azido-6-hydroxy-2-methylhexahydro-1H-isoindole-1,3(2H)-dione (1b), 1d, 2a and 2b with mammalian rapamycin target, human ribosomal S6 kinase 1 and human epidermal growth factor receptor were investigated by molecular docking studies, . According to the docking results, 2a and 2b compounds containing a TBDPS group have stronger binding energies than 1b and 1d compounds against all target receptors.Article Citation - WoS: 2Citation - Scopus: 31-Octanol Is a Functional Impurity Modifying Particle Size and Photophysical Properties of Colloidal Zncdsse/Zns Nanocrystals(American Chemical Society, 2021) Sevim Ünlütürk, Seçil; Çağır, Ali; Varlıklı, Canan; Özçelik, SerdarImpurities in trioctylphophine (TOP) strongly affect nanocrystal synthesis. 1-Octanol among other contaminants in TOP is identified for the first time as a functional impurity by H-1 NMR. The deliberate addition of 1-octanol into trioctylphosphine reduced particle size and modified photophysical properties of ZnCdSSe/ZnS colloidal nanocrystals. NMR analysis furthermore revealed that 1-octanol is bonded to the nanocrystal surfaces. The ratio of integrals for the O-CH2 protons of 1-octanol, which is the lowest compared to the other ligands, suggests that 1-octanol plays a critical role to tune the particle size of nanocrystals. The increased amount of 1-octanol added into TOP reduces the particle size from 9.8 to 7.2 nm, causing a progressive blue shift in the UV-vis and PL spectra but leaving the alloy composition unaffected. The rate of nonradiative processes is enhanced with the amount of 1-octanol added into TOP, correlating with higher dislocation density observed in the nanocrystals. As a conclusion, 1-octanol is proposed as a functional impurity that varies particle size and nonradiative photophysical processes in the ZnCdSSe/ZnS colloidal nanocrystals.Article Citation - WoS: 3Citation - Scopus: 4Enhanced Thermostability of the Immobilized Thermoalkalophilic Esterase Onto Magnetic-Cornstarch Nanoparticle(Wiley, 2022) Öz, Yasin; Sürmeli, Yusuf; Şanlı Mohamed, GülşahThe immobilization of the biocatalysts onto magnetic nanoparticles has been extensively applied as the external magnetic field facilitates the enzyme recovery from the reaction mixture. In the present study, glutaraldehyde-modified magnetite-cornstarch nanoparticles (MCNs) were successfully synthesized, elaborately characterized by ZetaSizer and surface-enhanced Raman spectroscopy, and used for the immobilization of a thermoalkalophilic esterase from Geobacillus sp. The optimal immobilization conditions were obtained at 65 degrees C, 2:3 molar ratios of Fe2+:Fe3+, and 1 g cornstarch resulted in approximately 90 nm magnetic particles in size. Also, immobilization yield and immobilization efficiency of the esterase were found as 74% and 82%, respectively. Scanning electron microscopy micrographs showed that MCNs were uniform, spherical in shape, and well dispersed and esterase immobilized MCNs displayed similar morphology as free MCNs. The maximum activity of free and immobilized esterase was obtained at 65 degrees C and pH 9. Immobilization onto glutaraldehyde-modified MCNs significantly enhanced the esterase thermostability. Additionally, the immobilized esterase kept its residual activity of 75% after three sequential cycles, suggesting that it has favorable operational stability.Article Citation - WoS: 7Citation - Scopus: 8Thermoalkalophilic Recombinant Esterase Entrapment in Chitosan/Calcium Beads and Its Characterization(Wiley, 2021) Tercan, Cisem; Sürmeli, Yusuf; Şanlı Mohamed, GülşahBACKGROUND Esterases (EC 3.1.1.1), a class of hydrolases, degrade the ester bonds of lipids into alcohol and carboxylic acids and synthesize carboxylic ester bonds. They are used in a variety of biotechnological, industrial, environmental, and pharmaceutical applications due to their many valuable properties. Particularly, extremophilic esterases with many superior properties are of great interest for various reactions. Immobilization of enzymes may provide some advantages over free enzymes not only to improve the properties of enzymes but also to increase the reusability of biocatalyst in industrial applications. Therefore, many different immobilization applications for enzymes have been reported in various studies. To our knowledge, a thermophilic esterase has not so far been immobilized by entrapment using chitosan/calcium/alginate-blended beads. Here, we reported the immobilization of thermoalkalophilic recombinant esterase by entrapment using chitosan/calcium/alginate-blended beads, and then the entrapped esterase was characterized biochemically in details. RESULTS In the present study, a thermophilic recombinant esterase was immobilized by entrapment in chitosan/calcium/alginate-blended beads for the first time. The 0.5 mg mL(-1) purified recombinant esterase was entrapped in 1% chitosan, 2% alginate, and 0.7 M CaCl2 blended beads. The results showed that immobilization yield and entrapment efficiency of the entrapped esterase were 69.5% and 80.4%, respectively. SEM micrograph showed that the surface of the beads resembled a mesh and very compact structures. Chitosan/calcium/alginate-blended beads exhibited an 18.8% swelling ratio and had a moderate porous structure. The entrapment technique highly enhanced the thermostability of the esterase and shifted its optimum temperature from 65 to 80 degrees C. The immobilized esterase was very stable in a wide range of pH (8.5-11) displaying maximum activity at pH 9. ZnCl2 slightly increased the activity of immobilized esterase whereas several metal ions reduced the enzyme activity. When the enzyme was immobilized in chitosan/calcium/alginate-blended beads, its K-m increased about 2 times and V-max value decreased almost 1.5 times. Immobilization allowed repeated uses of the esterase having good operational stability in a continuous process. CONCLUSION The results revealed that the immobilization of a thermophilic recombinant esterase by entrapment in chitosan/calcium/alginate-blended beads exhibited considerably better compared to other immobilization processes with various entrapment strategies. (c) 2021 Society of Chemical Industry (SCI).Article Citation - WoS: 1Citation - Scopus: 1Fabrication and in Vitro Evaluation of Thermally Cross-Linked Gelatin Nanofibers for Drug Delivery Applications(Taylor & Francis, 2022) Mete, Derya; Göktaş, Gözde; Şanlı Mohamed, GülşahIn this study, four different nanofibers consisting of gelatin (Gel), doxorubicin (DOX) with gel (DOX@Gel), a composite of gel with poly(ethylene glycol) (PEGylated-gel), and DOX@PEGylated-gel were fabricated. Subsequently, the nanofibers were thermally cross-linked in order to offer a stable and biocompatible alternative for the biological applications of nanofibers such as drug delivery and tissue engineering. Nanofibers were characterized by scanning electron microscopy, Fourier Transform-Infrared Spectroscopy (FT-IR), and confocal microscopy. The formation of smooth, continuous, and uniform nanofibers was observed and the addition of PEG resulted in an increase whereas the incorporation of DOX into nanofibers had no significant change in the diameter of nanofibers. Crosslinking also enlarged the diameter of all nanofibers and the most dramatic increase was observed 53% by DOX@PEGylated-gel. Afterward, the biological performance of the nanofibers was investigated by drug release profile, cytotoxicity on A549 cell line as well as antimicrobial activity with E. coli and S. aureus. The results indicate an enhanced drug release profile, moderate antimicrobial activity, and reasonable cytotoxic efficiency for thermally cross-linked nanofibers compared to uncross-linked nanofibers.Article Citation - WoS: 27Citation - Scopus: 28Biocomposite Scaffolds for 3d Cell Culture: Propolis Enriched Polyvinyl Alcohol Nanofibers Favoring Cell Adhesion(John Wiley and Sons Inc., 2021) Bilginer, Rumeysa; Özkendir İnanç, Dilce; Yıldız, Ümit Hakan; Arslan Yıldız, AhuThe objective of this work is generation of propolis/polyvinyl alcohol (PVA) scaffold by electrospinning for 3D cell culture. Here, PVA used as co-spinning agent since propolis alone cannot be easily processed by electrospinning methodology. Propolis takes charge in maximizing biological aspect of scaffold to facilitate cell attachment and proliferation. Morphological analysis showed size of the electrospun nanofibers varied between 172-523 nm and 345-687 nm in diameter, for non-crosslinked and crosslinked scaffolds, respectively. Incorporation of propolis resulted in desired surface properties of hybrid matrix, where hybrid scaffolds highly favored protein adsorption. To examine cell compatibility, NIH-3T3 and HeLa cells were seeded on propolis/PVA hybrid scaffold. Results confirmed that integration of propolis supported cell adhesion and cell proliferation. Also, results indicated electrospun propolis/PVA hybrid scaffold provide suitable microenvironment for cell culturing. Therefore, developed hybrid scaffold could be considered as potential candidate for 3D cell culture and tissue engineering.Article Citation - WoS: 3Citation - Scopus: 4Lipid Bilayer on Wrinkled-Interfaced Graphene Field Effect Transistor(Elsevier Ltd., 2021) Özkendir İnanç, Dilce; Çelebi, Cem; Yıldız, Ümit HakanThis study describes lipid bilayer-based sensor interface on SiO2 encapsulated graphene field effect transistors (GFET). The SiO2 layer was utilized as a lipid compatible surface that drives bilayer formation. The two types of surface morphologies i) wrinkled morphology by thermal evaporation (TE) and ii) flat morphology by pulsed electron deposition (PED) were obtained. The sensing performance of wrinkled and flat interfaced-GFETs were investigated, pH sensitivity of wrinkled interfaced-GFETs were found to be ten fold larger than the flat ones. The enhanced sensitivity is attributed to thinning of the oxide layer by formation of wrinkles thereby facilitating electrostatic gating on graphene. We foresee that described wrinkled SiO2 interfaced-GFET holds promise as a cell membrane mimicking sensing platform for novel bioelectronic applications. © 2020Article Citation - WoS: 6Citation - Scopus: 7Development of a Water-Soluble 3-Formylbodipy Dye for Fluorogenic Sensing and Cell Imaging of Sulfur Dioxide Derivatives(Elsevier Ltd., 2019) Işık, Murat; Şimşek Turan, İlke; Dartar, SuayA new water-soluble, highly fluorogenic 3-formylBODIPY dye that enables the sensing of SO2 derivatives in aqueous buffers and cancer cells is reported. The quaternary ammonium group appended through the mesa-position of the BODIPY dye ensures water solubility. The probe exhibits high specificity for cytosolic (bi)sulfites and fluoresces brightly in human lung adenocarcinoma cells (A549). (C) 2019 Elsevier Ltd. All rights reserved.Article Citation - WoS: 35Citation - Scopus: 36Colloidal Nanodisk Shaped Plexcitonic Nanoparticles With Large Rabi Splitting Energies(American Chemical Society, 2019) Mert Balcı, Fadime; Sarısözen, Sema; Polat, Nahit; Balcı, SinanWhen plasmons supported by metal nanoparticles interact strongly with molecular excitons or excitons of semiconducting quantum dots, plexcitons are formed in the strong coupling regime. The hybrid plexcitonic nanoparticles with a wide range of sizes and shapes have been synthesized by using wet chemistry methods or have been fabricated on solid substrates by using lithographic techniques. In order to deeply understand plasmon-exciton interaction at the nanoscale dimension and boost the performance of nanophotonic devices made of plexcitonic nanoparticles, new types of plexcitonic nanoparticles with tunable optical properties and outstanding stability at room temperature are urgently needed. Herein, we for the first time report pure colloidal nanodisk shaped plexcitonic nanoparticles with very large Rabi splitting energies, i.e., more than 350 meV. We synthesize silver nanoprisms by using seed mediated synthesis and then convert nanoprisms to nanodisks at a high temperature. Localized plasmon resonance of the silver nanodisk in the visible spectrum can be effectively tuned by heating. Subsequently, self-assembly of J-aggregate dyes on plasmonic nanodisks produces plexcitonic nanoparticles. We envision that colloidal nanodisk shaped plexcitonic nanoparticles with very large Rabi splitting energies and outstanding stability at room temperature will enlarge the application of plexcitonic nanoparticles in a variety of fields such as polariton laser, biosensor, plasmon molecular nanodevices, and energy flow at nanoscale dimensions.