Chemistry / Kimya
Permanent URI for this collectionhttps://hdl.handle.net/11147/4072
Browse
122 results
Search Results
Article Citation - WoS: 5Citation - Scopus: 6Boosting Up Printability of Biomacromolecule Based Bio-Ink by Modulation of Hydrogen Bonding Pairs(Elsevier Ltd., 2020) Köksal, Büşra; Önbaş, Rabia; Başkurt, Mehmet; Şahin, Hasan; Arslan Yıldız, Ahu; Yıldız, Ümit HakanThis study describes low dose UV curable and bioprintable new bioink made of hydrogen bond donor-acceptor adaptor molecule 2-isocyanatoethyl methacrylate (NCO)modified gelatin (NCO-Gel). Our theoretical calculations demonstrate that insertion of 2-isocyanatoethyl methacrylate doubles the interaction energy (500 meV) between gelatin chains providing significant contribution in interchain condensation and self-organization as compared to methacrylic anhydride modified gelatin (GelMA). The NCO-Gel exhibits peak around 1720 cm?1 referring to bidentate hydrogen bonding between H-NCO and its counterpart O[dbnd]CN[sbnd]H. These strong interchain interactions drive chains to be packed and thereby facilitating UV crosslinking. The NCO-Gel is exhibiting a rapid, 10 s gelation process by the exposure of laser (3 W, 365 nm). The dynamic light scattering characterization also reveals that NCO-Gel has faster sol to gel transition as compared to GelMA depending on the UV curing time. The NCO-Gel was found to be more firm and mechanically strong that provides advantages in molding as well as bioprinting processes. Bioprinted NCO-Gel has shown sharp borders and stable 3D geometry as compared to GelMA ink under 10 s UV curing time. The cell viability tests confirm that NCO-Gel facilitates cell proliferation and supports cell viability. We foresee that NCO-Gel bioink formulation provides a promising opportunity when low dose UV curing and rapid printing are required. © 2020 Elsevier LtdArticle Citation - WoS: 8Citation - Scopus: 7Engineered Silica Nanoparticles Are Biologically Safe Vehicles To Deliver Drugs or Genes To Liver Cells(Elsevier Ltd., 2021) Tüncel, Özge; Kahraman, Erkan; Bağcı, Gülsün; Atabey, Neşe; Özçelik, SerdarEngineered silica nanoparticles (SiNP) are emerging materials for medical applications. Evaluating biological responses of specific cells treated with engineered silica nanoparticles is however essential. We synthesized and characterized the physicochemical properties of silica nanoparticles with two different sizes of 10 and 100 nm (10SiNP and 100SiNP) dispersed in cell culture medium. HuH-7, an epithelial-like human hepatoblastoma cell line and SK-HEP-1, a liver sinusoidal endothelial cell line (LSEC) are employed to evaluate their biological responses for the SiNP treatment. Primary human lymphocytes are used to assess genotoxicity recommended by OECD guidelines while erythrocytes are used to assess hemolytic activity. The engineered silica nanoparticles are not able to produce radical species, to alter the mitochondrial membrane potential, and induce any adverse effects on cell proliferation. The colony formation ability of HuH-7 hepatoblastoma cells was not affected following the SiNP treatment. Furthermore, SiNPs do not induce hemolysis of red blood cells and are not genotoxic. These findings suggest that SiNPs regardless of the size, amount, and incubation time are biologically safe vehicles to deliver drugs or genes to the liver. © 2020 Elsevier B.V.Article Citation - WoS: 3Citation - Scopus: 4Lipid Bilayer on Wrinkled-Interfaced Graphene Field Effect Transistor(Elsevier Ltd., 2021) Özkendir İnanç, Dilce; Çelebi, Cem; Yıldız, Ümit HakanThis study describes lipid bilayer-based sensor interface on SiO2 encapsulated graphene field effect transistors (GFET). The SiO2 layer was utilized as a lipid compatible surface that drives bilayer formation. The two types of surface morphologies i) wrinkled morphology by thermal evaporation (TE) and ii) flat morphology by pulsed electron deposition (PED) were obtained. The sensing performance of wrinkled and flat interfaced-GFETs were investigated, pH sensitivity of wrinkled interfaced-GFETs were found to be ten fold larger than the flat ones. The enhanced sensitivity is attributed to thinning of the oxide layer by formation of wrinkles thereby facilitating electrostatic gating on graphene. We foresee that described wrinkled SiO2 interfaced-GFET holds promise as a cell membrane mimicking sensing platform for novel bioelectronic applications. © 2020Article Citation - WoS: 2Reduction of Carbon Dioxide During the Synthesis of Metal Nano-Particles in Water(Elsevier Ltd., 2003) Polat, Hürriyet; Cohen, H; Meyerstein, D; Rusonik, I.An effort was made to synthesize "carbon-free" metal (Fe-0, Co-0, Ni-0) nano-particles via the reduction of their salts with BH4- in aqueous solutions. Surprisingly it was found that when the synthesis is carried out in the presence of CO2, e.g., in aerated solutions, the CO2 is catalytically reduced by BH(4)(-)on the surface of the metal particles. Carbon-free metals can be prepared by reduction under an inert atmosphere. Thus metal surfaces might have acted as catalysts for CO2 fixation, probably via the initial formation of carbon clusters, in the reductive atmosphere in the prebiotic era. (C) 2003 Elsevier B.V. All rights reserved.Article Citation - WoS: 169Citation - Scopus: 177Thin Film Microextraction: Towards Faster and More Sensitive Microextraction(Elsevier Ltd., 2019) Ölçer, Yekta Arya; Tascon, Marcos; Eroğlu, Ahmet Emin; Boyacı, EzelThin film microextraction (TFME) is an analytical tool that has been proven to be suitable for integrated sampling and sample preparation of a wide variety of routine and on-site applications. Compared to the traditional microextraction techniques, the most important advantage of TFME is its enhanced sensitivity due to the relatively larger extractive phase spread over a larger surface area. The technique, in this way, facilitates fast extraction kinetics and high extractive capacity. Moreover, TFME offers high versatility for device development over classical SPME technologies due to the plethora of available extractive phases, coating methods and geometry options. The goal of this review is to provide a comprehensive summary of the contemporary advances in this exciting field covering novel extractive phases, technological and methodological developments, and relevant cutting-edge applications. Finally, a critical discussion of the future trends on TFME is also presented. (C) 2019 Elsevier B.V. All rights reserved.Article Citation - WoS: 29Citation - Scopus: 29Investigating Silicon Wafer Based Substrates for Dried-Droplet Analysis by Laser-Induced Breakdown Spectroscopy(Elsevier Ltd., 2019) Aras, Nadir; Yalçın, ŞerifeThis work communicates a critical assessment on the analytical capability of the three silicon wafer-based substrates; crystalline silicon (c-Si), oxide-coated silicon (SiO2-Si), and nitride-coated silicon (Si3N4-Si), for dried-droplet analysis by laser-induced breakdown spectroscopy. The methodology consists of loading, drying and analyzing steps. First, nanoliter volume of droplets are manually loaded onto the substrate and dried at room temperature. Then, the dry residue is subjected to high peak power (1.15 GW/cm(2)) laser pulses focused outside the minimum focal point condition and luminescent plasma is spectroscopically analyzed. Results revealed that nitride-coated substrate exhibits strong enhancements in signal intensity for most emission lines of the analyte species investigated: Cd, Cr, Cu, Mn, and Pb. Surface reflectivity and surface morphology were comparatively investigated to explore enhanced analytical performance of nitride-coated substrates. Experimental conditions were optimized and growth curves for all the elements are found linear with minimum regression constant of 0.96. LOD's of 62 pg Cd, 1.5 pg Cr, 0.5 pg Cu, 2 pg Mn and 11 pg Pb, in absolute amounts, were obtained. The accuracy and precision of the methodology were tested on certified reference water sample (CRM-TMDW), and ICP-multi-element standard sample (ICP-MES). The surface enhancement effect observed on Si3N4 coated substrates has improved the analytical capability of laser-induced breakdown spectroscopy for liquid analysis.Article Citation - WoS: 6Citation - Scopus: 7Development of a Water-Soluble 3-Formylbodipy Dye for Fluorogenic Sensing and Cell Imaging of Sulfur Dioxide Derivatives(Elsevier Ltd., 2019) Işık, Murat; Şimşek Turan, İlke; Dartar, SuayA new water-soluble, highly fluorogenic 3-formylBODIPY dye that enables the sensing of SO2 derivatives in aqueous buffers and cancer cells is reported. The quaternary ammonium group appended through the mesa-position of the BODIPY dye ensures water solubility. The probe exhibits high specificity for cytosolic (bi)sulfites and fluoresces brightly in human lung adenocarcinoma cells (A549). (C) 2019 Elsevier Ltd. All rights reserved.Article Citation - WoS: 34Citation - Scopus: 36Biomimetic Hybrid Scaffold Consisting of Co-Electrospun Collagen and Pllcl for 3d Cell Culture(Elsevier Ltd., 2019) Türker, Esra; Yıldız, Ümit Hakan; Arslan Yıldız, AhuElectrospun collagen is commonly used as a scaffold in tissue engineering applications since it mimics the content and morphology of native extracellular matrix (ECM) well. This report describes "toxic solvent free" fabrication of electrospun hybrid scaffold consisting of Collagen (Col) and Poly(L-lactide-co-epsilon-caprolactone) (PLLCL) for three-dimensional (3D) cell culture. Biomimetic hybrid scaffold was fabricated via co-spinning approach where simultaneous electrospinning of PLLCL and Collagen was mediated by polymer sacrificing agent Polyvinylpyrrolidone (PVP). Acidified aqueous solution of PVP was used to solubilize collagen without using toxic solvents for electrospinning, and then PVP was readily removed by rinsing in water. Mechanical characterizations, protein adsorption, as well as biodegradation analysis have been conducted to investigate feasibility of biomimetic hybrid scaffold for 3D cell culture applications. Electrospun biomimetic hybrid scaffold, which has 3D-network structure with 300-450 nm fiber diameters, was found to be maximizing cell adhesion through assisting NIH 3T3 mouse fibroblast cells. 3D cell culture studies confirmed that presence of collagen in biomimetic hybrid scaffold have created a major impact on cell proliferation compared to conventional 2D systems on long-term, also cell viability increased with the increasing amount of collagen. (c) 2019 Elsevier B.V. All rights reserved.Article Citation - WoS: 16Citation - Scopus: 17Antiproliferative Activity of (r)-4 '-methylklavuzon on Hepatocellular Carcinoma Cells and Epcam(+)/Cd133(+) Cancer Stem Cells Via Sirt1 and Exportin-1 (crm1) Inhibition(Elsevier Ltd., 2019) Delman, Murat; Avcı, Sanem Tercan; Akçok, İsmail; Kanbur, Tuğçe; Erdal, Esra; Çağır, AliCytotoxic effects of (R)-4'-methylklavuzon were investigated on hepatocellular carcinoma cells (HuH-7 and HepG2) and HuH-7 EpCAM(+)/CD133(+) cancer stem cells. IC50 of (R)-4'-methylklavuzon was found as 1.25 mu M for HuH-7 parental cells while it was found as 2.50 mu M for HuH-7 EpCAM(+)/CD133(+) cancer stem cells. (R)-4'-methylklavuzon tended to show more efficient in vitro cytotoxicity with its lower IC50 values on hepatocellular carcinoma cell lines compared to its lead molecule, goniothalamin and FDA-approved drugs, sorafenib and regorafenib. Cell-based Sirtuin/HDAC enzyme activity measurements revealed that endogenous Sirtuin/HDAC enzymes were reduced by 40% compared to control. SIRT1 protein levels were upregulated indicating triggered DNA repair mechanism. p53 was overexpressed in HepG2 cells. (R)-4'methylklavuzon inhibited CRM1 protein providing increased retention of p53 and RIOK2 protein in the nucleus. HuH-7 parental and EpCAM(+)/CD133(+) cancer stem cell spheroids lost intact morphology. 3D HepG2 spheroid viabilities were decreased in a correlation with upregulation in p53 protein levels. (C) 2019 Elsevier Masson SAS. All rights reserved.Article Citation - WoS: 6Citation - Scopus: 6Palladium-Catalyzed Coupling of 2-En Carbonates With Terminal Alkynes(Elsevier Ltd., 2018) Taç, Doğan; Artok, LeventThe first palladium-catalysed coupling of the carbonates of (E)-configured conjugated enynols with terminal alkynes is described. This method allows the synthesis of vinyl-allenynes with good yields. It has been determined that the method is not suitable for the (Z)-configured substrates.