Chemistry / Kimya

Permanent URI for this collectionhttps://hdl.handle.net/11147/4072

Browse

Filters

2016 - 201922020 - 20211

Settings

Author: search.filters.author.Ünlütürk, Seçil Sevim

Search Results

Now showing 1 - 3 of 3
  • Article
    Citation - WoS: 2
    Citation - Scopus: 2
    Mn2+ Ions Incorporated Into Znsxse1-X Colloidal Quantum Dots: Controlling Size and Composition of Nanoalloys and Regulating Magnetic Dipolar Interactions
    (IOP Publishing, 2021) Özçelik, Serdar; Akdoğan, Yaşar; Özçelik, Serdar; 03.09. Department of Materials Science and Engineering; 04.01. Department of Chemistry; 03. Faculty of Engineering; 04. Faculty of Science; 01. Izmir Institute of Technology
    A facile synthesis method is introduced how to prepare magnetically active ultraviolet emitting manganese ions incorporated into ZnSxSe1-x colloidal quantum dot (nanoalloy) at 110 degrees C in aqueous solutions. The reaction time is the main factor to control the hydrodynamic size from 3 to 10 nm and the precursor ratio is significant to tune the alloy composition. ZnS shell layer on the ZnSxSe1-x core was grown to passivate environmental effects. The nanoalloy has ultraviolet emission at 380 nm having a lifetime of 80 ns and 7% quantum yield. The incorporation of Mn2+ ions into the nanoalloys induced magnetic activity but did not modify the structure and photophysical properties of the nanoalloys. Colloidal and powdery samples were prepared and analyzed by electron paramagnetic resonance (EPR) spectroscopy. In the colloidal dispersions, EPR spectra showed hyperfine line splitting regardless of the Mn2+ ion fractions, up to 6%, indicating that Mn2+ ions incorporated into the nanoalloys were isolated. EPR signals of the powdery samples were broadened when the fraction of Mn2+ ions was higher than 0.1%. The EPR spectra were simulated to reveal the locations and interactions of Mn2+ ions. The simulations suggest that the Mn2+ ions are located on the nanoalloy surfaces. These findings infer that the magnetic dipolar interactions are regulated by the initial mole ratio of Mn/Zn and the physical state of the nanoalloys adjusted by preparation methods.
  • Article
    Citation - WoS: 6
    Citation - Scopus: 8
    Enhanced Spontaneous Emission Rate in a Low-Q Hybrid Photonic-Plasmonic Nanoresonator
    (American Chemical Society, 2019) Gökbulut, Belkıs; Özçelik, Serdar; İnanç, Arda; Demir, Mustafa Muammer; Topçu, Gökhan; Ünlütürk, Seçil Sevim; Özçelik, Serdar; Demir, Mustafa Muammer; İnci, Mehmet Naci; 04.01. Department of Chemistry; 03.09. Department of Materials Science and Engineering; 03. Faculty of Engineering; 04. Faculty of Science; 01. Izmir Institute of Technology
    In this paper, CdTe quantum dots (QDs)-doped single electrospun polymer nanofibers are partially coated with gold nanoparticles to form distinct hybrid photonic-plasmonic nanoresonators to investigate the critical role of the cavity-confined hybrid mode on the modification of the spontaneous emission dynamics of the fluorescent emitters in low-Q photonic cavities. A total enhancement factor of 11.2 is measured via a time-resolved experimental technique, which shows that there is an increase of about three times in the spontaneous emission rate for the QDs-doped gold nanoparticle-decorated nanofibers as they are compared with those uncoated ones. The physical mechanism affecting the spontaneous emission rate of the encapsulated QDs in such a hybrid photonic-plasmonic nanoresonator is explained to be due to regeneration of the mode field in the nanofiber cavity upon the interaction of the dipoles with the surface plasmons of distinctive gold nanoparticles that surround the outer surface of the nanofiber.
  • Article
    Citation - Scopus: 2
    Enthalpy-Driven Selective Loading of Cdse0.75s0.25 Nanoalloys in Triblock Copolymer Polystyrene-B
    (Elsevier Ltd., 2016) Aşkın, Görkem; Çeçen, Volkan; Demir, Mustafa Muammer; Özçelik, Serdar; Demir, Mustafa Muammer; Özçelik, Serdar; 04.01. Department of Chemistry; 03.09. Department of Materials Science and Engineering; 03. Faculty of Engineering; 04. Faculty of Science; 01. Izmir Institute of Technology
    CdSe0.75S0.25 nanoalloys were blended with asymmetric triblock copolymer of polystyrene-b-polyisoprene-b-polystyrene(PS-SIS) in tetrahydrofuran. The fraction of styrene block varies from 14 to 22% with respect to isoprene by mass. The morphology of the copolymer cast film experiences a phase change from cylinder to lamella. CdSe0.75S0.25 nanoalloys were prepared by two-phase method. The surface of the nanoalloys was capped by either oleic acid (OA) or n-tri-octylphosphonic acid (TOPO) in situ. The mean diameter of the alloyed particles is around 12 nm in both systems. The chemical nature of the nanoalloy surface was found to influence the dispersion of the particles over polymer volume. The size of the nanoalloy domains in PS is 50 nm, on average, consisting of approximately 0.7 wt% nanoalloys. However, the size of the nanoalloy domains is smaller when they are loaded into PS-SIS. The structure formation is predominantly determined by enthalpic compatibilization. Atomic force microscopy results suggest that the nanoalloys capped with TOPO sequester into PS-rich domains and enlarge the domain. On the other hand, the ones capped with OA prefer to locate in polyisoprene domains. The increase of particles over 1.0 wt% distorts the lamella structure.